Find HS Code and trade information for ALLOY TAPPER

HS Code Classification & Duty Analysis: ALLOY TAPPER

Based on the provided information, your declared item "ALLOY TAPPER" falls under two potential HS codes, depending on its specific characteristics and function. Here's a detailed breakdown:

1. HS Code: 8207.40.30.00 – Tools for tapping or threading, and parts thereof (with cutting part containing specific alloy percentages)

• Chapter 82: Hand tools, pneumatic, hydraulic or with self-operating mechanisms, and parts and accessories therefor. This chapter covers a wide range of tools used by hand or powered.
• 8207: Interchangeable tools for hand tools, whether or not power operated, or for machine-tools. This narrows down the category to tools designed to be swapped in and out of hand tools or machines.
• 8207.40: Tools for tapping or threading, and parts thereof. This specifically identifies tools used for creating screw threads.

• 8207.40.30.00: This is the most specific code, applying to tools for tapping or threading with a cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium. This indicates the tool is made of alloy steel.

  • Duty:
    • Basic Duty: 5.7%
    • Additional Duty: 25.0% (current rate)
    • Additional Duty (post April 2, 2025): 30.0%
    • Total Duty: 60.7%

2. HS Code: 7318.15.50.51 – Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of iron or steel; Continuously threaded rod of alloy steel

• Chapter 73: Articles of iron or steel. This chapter covers a broad range of iron and steel products.
• 7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel.
• 7318.15: Other screws and bolts, whether or not with their nuts or washers.
• 7318.15.50: Continuously threaded rod.

• 7318.15.50.51: Of alloy steel. This specifies the rod is made of alloy steel.

  • Duty:
    • Basic Duty: 0.0%
    • Additional Duty: 25.0% (current rate)
    • Additional Duty (post April 2, 2025): 30.0% (for steel and aluminum products)
    • Total Duty: 80.0%

Key Considerations & Recommendations:

• Material Composition: The primary determinant between these two HS codes is the precise composition of the alloy. If the cutting part of the "ALLOY TAPPER" contains over 0.2% chromium, molybdenum, or tungsten, or over 0.1% vanadium, 8207.40.30.00 is the correct code. If it's a continuously threaded rod made of alloy steel, 7318.15.50.51 is more appropriate. Please provide a material specification sheet for accurate classification.
• Functionality: If the item is primarily a tool for creating threads (used in a tap wrench or machine), 8207.40.30.00 is likely correct. If it's a threaded rod intended for fastening or other structural purposes, 7318.15.50.51 is more suitable.
• Single vs. Multiple Parts: If the "ALLOY TAPPER" is a complete, assembled tool, 8207.40.30.00 is the better choice. If you are importing separate components (e.g., a threaded rod and a handle), you may need to classify them separately.
• Upcoming Tariff Changes: Be aware of the additional duty increase scheduled for April 2, 2025. This will significantly impact the total duty payable.
• Certification: Depending on the end-use application of the "ALLOY TAPPER", you may need to provide certifications related to material quality, safety standards, or compliance with specific industry regulations. Please clarify the intended use of the product to determine if any certifications are required.
• Invoice Details: Ensure your commercial invoice clearly specifies the material composition, dimensions, and intended use of the "ALLOY TAPPER" to facilitate accurate customs clearance.

Disclaimer: This information is for general guidance only and does not constitute professional customs advice. It is recommended to consult with a licensed customs broker or relevant authority for specific classification and duty requirements.