| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 3907610050 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3906100000 | Doc | 61.3% | CN | US | 2025-05-12 |
| 3906902000 | Doc | 61.3% | CN | US | 2025-05-12 |
| 3907610050 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3907610050 | Doc | 61.5% | CN | US | 2025-05-12 |
Here is the structured analysis and customs compliance information for the Acrylic Resin Injection Molding Material based on the provided HS codes and tax details:
🔍 Product Classification Overview
The product "Acrylic Resin Injection Molding Material" falls under several HS codes depending on its specific chemical composition and form. Below are the relevant classifications and associated customs duties:
📦 HS Code Classification & Tax Details
1. HS Code: 3907610050
Description: Other acrylic polymer raw materials
Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code may also apply to polyethylene, other polyethers, epoxy resins, polycarbonates, and other polyester resins in primary form.
2. HS Code: 3906100000
Description: Polymethyl methacrylate (PMMA)
Total Tax Rate: 61.3%
- Base Tariff: 6.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is a specific type of acrylic resin used in injection molding and optical applications.
3. HS Code: 3906902000
Description: Other types of acrylic resins (primary form)
Total Tax Rate: 61.3%
- Base Tariff: 6.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This includes other acrylic resins not covered under 3906100000.
⚠️ Important Notes on Tariff Changes
-
April 11, 2025 Special Tariff:
A 30.0% additional tariff will be imposed on all the above HS codes after April 11, 2025. This is a time-sensitive policy and must be accounted for in cost estimation and customs planning. -
No Anti-Dumping Duties Mentioned:
As of now, there are no specific anti-dumping duties listed for these HS codes related to iron or aluminum. However, this may change depending on trade policies and investigations.
📌 Proactive Compliance Advice
-
Verify Material Composition:
Confirm the exact chemical structure and form of the acrylic resin (e.g., PMMA, polycarbonate, etc.) to ensure correct HS code classification. -
Check Unit Price and Certification Requirements:
Some HS codes may require specific certifications (e.g., REACH, RoHS) for import compliance, especially if the product is for consumer or industrial use. -
Monitor Tariff Updates:
Keep track of any changes in customs policies, especially the April 11, 2025 tariff increase, to avoid unexpected costs. -
Consult a Customs Broker:
For high-value or complex shipments, it is advisable to work with a licensed customs broker to ensure full compliance and accurate duty calculation.
✅ Summary of Tax Rates (as of now)
| HS Code | Description | Base Tariff | Additional Tariff | April 11, 2025 Tariff | Total Tax |
|---|---|---|---|---|---|
| 3907610050 | Other acrylic polymer raw materials | 6.5% | 25.0% | 30.0% | 61.5% |
| 3906100000 | Polymethyl methacrylate (PMMA) | 6.3% | 25.0% | 30.0% | 61.3% |
| 3906902000 | Other acrylic resins (primary form) | 6.3% | 25.0% | 30.0% | 61.3% |
If you provide more details about the specific type of acrylic resin (e.g., PMMA, polycarbonate, etc.), I can help you narrow down the most accurate HS code for your product. Here is the structured analysis and customs compliance information for the Acrylic Resin Injection Molding Material based on the provided HS codes and tax details:
🔍 Product Classification Overview
The product "Acrylic Resin Injection Molding Material" falls under several HS codes depending on its specific chemical composition and form. Below are the relevant classifications and associated customs duties:
📦 HS Code Classification & Tax Details
1. HS Code: 3907610050
Description: Other acrylic polymer raw materials
Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code may also apply to polyethylene, other polyethers, epoxy resins, polycarbonates, and other polyester resins in primary form.
2. HS Code: 3906100000
Description: Polymethyl methacrylate (PMMA)
Total Tax Rate: 61.3%
- Base Tariff: 6.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is a specific type of acrylic resin used in injection molding and optical applications.
3. HS Code: 3906902000
Description: Other types of acrylic resins (primary form)
Total Tax Rate: 61.3%
- Base Tariff: 6.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This includes other acrylic resins not covered under 3906100000.
⚠️ Important Notes on Tariff Changes
-
April 11, 2025 Special Tariff:
A 30.0% additional tariff will be imposed on all the above HS codes after April 11, 2025. This is a time-sensitive policy and must be accounted for in cost estimation and customs planning. -
No Anti-Dumping Duties Mentioned:
As of now, there are no specific anti-dumping duties listed for these HS codes related to iron or aluminum. However, this may change depending on trade policies and investigations.
📌 Proactive Compliance Advice
-
Verify Material Composition:
Confirm the exact chemical structure and form of the acrylic resin (e.g., PMMA, polycarbonate, etc.) to ensure correct HS code classification. -
Check Unit Price and Certification Requirements:
Some HS codes may require specific certifications (e.g., REACH, RoHS) for import compliance, especially if the product is for consumer or industrial use. -
Monitor Tariff Updates:
Keep track of any changes in customs policies, especially the April 11, 2025 tariff increase, to avoid unexpected costs. -
Consult a Customs Broker:
For high-value or complex shipments, it is advisable to work with a licensed customs broker to ensure full compliance and accurate duty calculation.
✅ Summary of Tax Rates (as of now)
| HS Code | Description | Base Tariff | Additional Tariff | April 11, 2025 Tariff | Total Tax |
|---|---|---|---|---|---|
| 3907610050 | Other acrylic polymer raw materials | 6.5% | 25.0% | 30.0% | 61.5% |
| 3906100000 | Polymethyl methacrylate (PMMA) | 6.3% | 25.0% | 30.0% | 61.3% |
| 3906902000 | Other acrylic resins (primary form) | 6.3% | 25.0% | 30.0% | 61.3% |
If you provide more details about the specific type of acrylic resin (e.g., PMMA, polycarbonate, etc.), I can help you narrow down the most accurate HS code for your product.
Customer Reviews
No reviews yet.