Find HS Code and trade information for EXTENSION TUBE

Understanding the Classification of "EXTENSION TUBE" – A Comprehensive Guide

Based on the provided HS codes, here's a breakdown of the potential classifications for "EXTENSION TUBE", along with relevant details to help you determine the most accurate categorization for your specific product.

Important Note: The correct HS code depends heavily on the material and intended use of the extension tube. The following analysis covers the options provided, but further information about your product may be needed for a definitive classification.

1. HS Code: 3917.32.00.50 – Plastics Tubes, Pipes & Hoses (Not Reinforced)

• Chapter 39: Plastics and articles thereof. This indicates the tube is made primarily of plastic.
• 3917: Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics. This narrows down the category to plastic-based tubing.
• 3917.32: Other tubes, pipes and hoses: Other, not reinforced or otherwise combined with other materials, without fittings. This specifies that the tube is not reinforced (e.g., with metal braiding) and doesn't have pre-attached fittings.

• 3917.32.00.50: Further specifies the "Other" category within non-reinforced plastic tubes without fittings.

  • Tax Implications:

    • Basic Duty: 3.1%
    • Additional Duty: 25.0% (until April 2, 2025)
    • Additional Duty (after April 2, 2025): 30.0%
    • Total Tax: 58.1%

  • Considerations: This code is suitable for extension tubes made entirely of plastic, such as PVC or polyethylene, used for applications like garden hoses or simple fluid transfer.

2. HS Code: 7304.90.10.00 – Seamless Iron or Steel Tubes (Wall Thickness 4mm+)

• Chapter 73: Iron or steel articles. This indicates the tube is made of iron or steel.
• 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. This specifies seamless construction (no welded seams).
• 7304.90: Other: Having a wall thickness of 4 mm or more. This indicates a thicker-walled tube.

• 7304.90.10.00: Further specifies "Other" category within seamless iron or steel tubes with a wall thickness of 4mm or more.

  • Tax Implications:

    • Basic Duty: 0.0%
    • Additional Duty: 0.0% (until April 2, 2025)
    • Additional Duty (after April 2, 2025): 30.0%
    • Total Tax: 30.0%

  • Considerations: This code is appropriate for robust, seamless steel or iron extension tubes, often used in industrial applications, plumbing, or structural support. The 4mm wall thickness requirement is crucial.

3. HS Code: 4009.11.00.00 – Vulcanized Rubber Tubes (Not Reinforced)

• Chapter 40: Rubber and articles thereof. This indicates the tube is made of vulcanized rubber.
• 4009: Tubes, pipes and hoses, of vulcanized rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges).
• 4009.11: Not reinforced or otherwise combined with other materials: Without fittings. This specifies that the tube is not reinforced and doesn't have pre-attached fittings.

• 4009.11.00.00: Further specifies the "Other" category within non-reinforced vulcanized rubber tubes without fittings.

  • Tax Implications:

    • Basic Duty: 2.5%
    • Additional Duty: 25.0% (until April 2, 2025)
    • Additional Duty (after April 2, 2025): 30.0%
    • Total Tax: 57.5%

  • Considerations: This code is suitable for extension tubes made of vulcanized rubber, often used in automotive applications (e.g., coolant hoses) or fluid transfer where flexibility is important.

Recommendations & Key Considerations:

1. Material Verification: The most important step is to confirm the primary material of your extension tube. Is it plastic, iron/steel, or rubber?
2. Reinforcement: Is the tube reinforced with braiding, metal, or other materials?
3. Wall Thickness: If it's iron or steel, accurately measure the wall thickness. The 4mm threshold is critical for HS Code 7304.90.10.00.
4. Fittings: Are fittings pre-attached?
5. Intended Use: While not definitive, the intended application can provide clues about the appropriate classification.
6. Certification: Depending on the application (e.g., potable water, automotive), specific certifications (e.g., NSF, REACH) may be required. Please verify the necessary certifications for your target market.
7. Single Invoice Value: Be aware of the single invoice value, as this can affect the applicable tax rates and import procedures.

Disclaimer: This information is for general guidance only and does not constitute professional customs advice. It is recommended to consult with a licensed customs broker or relevant authority for a definitive classification and to ensure compliance with all applicable regulations.