| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 3901306000 | Doc | 60.3% | CN | US | 2025-05-12 |
| 3904302000 | Doc | 55.0% | CN | US | 2025-05-12 |
| 3905915000 | Doc | 60.3% | CN | US | 2025-05-12 |
| 3905290000 | Doc | 59.0% | CN | US | 2025-05-12 |
| 3905915000 | Doc | 60.3% | CN | US | 2025-05-12 |
Product Name: Ethylene vinyl acetate copolymer injection molding grade resin
Classification: Based on HS codes and tariff details provided, the product may fall under several HS codes depending on specific characteristics such as formulation, application (e.g., injection molding grade), and form (e.g., primary form or processed).
✅ HS Code Classification and Tax Summary
1. HS Code: 3901306000
- Description: Ethylene vinyl acetate copolymer, injection molding grade, falls under the category of other descriptions under HS 390190.
- Total Tax Rate: 60.3%
- Base Tariff: 5.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is suitable if the product is a standard EVA copolymer used for injection molding.
2. HS Code: 3904302000
- Description: Ethylene-vinyl acetate-chlor乙烯 resin (injection molding grade), classified under a specific code for a tri-block copolymer.
- Total Tax Rate: 55.0%
- Base Tariff: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code applies if the product contains chlor乙烯 as a third monomer.
3. HS Code: 3905915000
- Description: Ethylene vinyl acetate copolymer resin, injection molding grade, falls under HS 3905.09.90 for other vinyl ester polymers in primary form.
- Total Tax Rate: 60.3%
- Base Tariff: 5.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is for primary form polymers, not processed or compounded materials.
4. HS Code: 3905290000
- Description: Ethylene vinyl acetate copolymer resin, injection molding grade, falls under HS 3905.29.00 for vinyl ester polymers in primary form.
- Total Tax Rate: 59.0%
- Base Tariff: 4.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is for primary form polymers, but with a slightly lower base tariff than 3905915000.
⚠️ Important Notes and Recommendations
-
Tariff Changes After April 11, 2025:
All listed HS codes will be subject to an additional 30.0% tariff after this date. This is a critical date for customs clearance planning. -
Anti-Dumping Duties:
No specific anti-dumping duties are mentioned for this product category in the provided data. However, always verify with the latest customs notices or consult a customs broker for confirmation. -
Material and Certification Requirements:
- Confirm the exact chemical composition of the product (e.g., vinyl acetate content, presence of other monomers like chlor乙烯).
- Ensure the product is in primary form (not compounded or processed) if using HS codes 3905290000 or 3905915000.
-
Check if certifications (e.g., REACH, RoHS, or specific import permits) are required for the destination country.
-
Unit Price and Classification:
The final HS code may vary based on unit price, intended use, and form (e.g., pellets vs. compounded material). Always verify with a customs expert or use a classification tool.
✅ Proactive Advice
- Verify the exact formulation of the EVA resin (e.g., vinyl acetate content, presence of other monomers).
- Check the form of the product (primary polymer vs. compounded or processed).
- Confirm the intended use (e.g., injection molding, hot melt adhesive) to ensure correct HS code.
- Plan for the April 11, 2025, tariff increase to avoid unexpected costs.
- Consult a customs broker or classification service for final confirmation, especially if the product is complex or has multiple components.
Let me know if you need help with HS code selection based on specific product details.
Product Name: Ethylene vinyl acetate copolymer injection molding grade resin
Classification: Based on HS codes and tariff details provided, the product may fall under several HS codes depending on specific characteristics such as formulation, application (e.g., injection molding grade), and form (e.g., primary form or processed).
✅ HS Code Classification and Tax Summary
1. HS Code: 3901306000
- Description: Ethylene vinyl acetate copolymer, injection molding grade, falls under the category of other descriptions under HS 390190.
- Total Tax Rate: 60.3%
- Base Tariff: 5.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is suitable if the product is a standard EVA copolymer used for injection molding.
2. HS Code: 3904302000
- Description: Ethylene-vinyl acetate-chlor乙烯 resin (injection molding grade), classified under a specific code for a tri-block copolymer.
- Total Tax Rate: 55.0%
- Base Tariff: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code applies if the product contains chlor乙烯 as a third monomer.
3. HS Code: 3905915000
- Description: Ethylene vinyl acetate copolymer resin, injection molding grade, falls under HS 3905.09.90 for other vinyl ester polymers in primary form.
- Total Tax Rate: 60.3%
- Base Tariff: 5.3%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is for primary form polymers, not processed or compounded materials.
4. HS Code: 3905290000
- Description: Ethylene vinyl acetate copolymer resin, injection molding grade, falls under HS 3905.29.00 for vinyl ester polymers in primary form.
- Total Tax Rate: 59.0%
- Base Tariff: 4.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is for primary form polymers, but with a slightly lower base tariff than 3905915000.
⚠️ Important Notes and Recommendations
-
Tariff Changes After April 11, 2025:
All listed HS codes will be subject to an additional 30.0% tariff after this date. This is a critical date for customs clearance planning. -
Anti-Dumping Duties:
No specific anti-dumping duties are mentioned for this product category in the provided data. However, always verify with the latest customs notices or consult a customs broker for confirmation. -
Material and Certification Requirements:
- Confirm the exact chemical composition of the product (e.g., vinyl acetate content, presence of other monomers like chlor乙烯).
- Ensure the product is in primary form (not compounded or processed) if using HS codes 3905290000 or 3905915000.
-
Check if certifications (e.g., REACH, RoHS, or specific import permits) are required for the destination country.
-
Unit Price and Classification:
The final HS code may vary based on unit price, intended use, and form (e.g., pellets vs. compounded material). Always verify with a customs expert or use a classification tool.
✅ Proactive Advice
- Verify the exact formulation of the EVA resin (e.g., vinyl acetate content, presence of other monomers).
- Check the form of the product (primary polymer vs. compounded or processed).
- Confirm the intended use (e.g., injection molding, hot melt adhesive) to ensure correct HS code.
- Plan for the April 11, 2025, tariff increase to avoid unexpected costs.
- Consult a customs broker or classification service for final confirmation, especially if the product is complex or has multiple components.
Let me know if you need help with HS code selection based on specific product details.
Customer Reviews
No reviews yet.