Find HS Code and trade information for GARDEN STAKES CONNECTORS

Okay, let's break down the HS codes and tax implications for your "GARDEN STAKES CONNECTORS" declaration. I'll provide a structured analysis, explaining each code and highlighting key considerations.

Important Note: The tax rates provided are as of today and subject to change. The "2025.4.2后" rates indicate changes taking effect after April 2nd, 2025. Always verify the latest rates with official customs sources before importing.

1. HS Code: 3926.90.99.89 – Other articles of plastics and articles of other materials

• 39: Plastics and articles thereof. This chapter covers a wide range of plastic products.
• 26: Other articles of plastics and articles of other materials. This narrows it down to specific plastic items not covered elsewhere.
• 90: Other. Further specifies the item within the "other" category.
• 99: Other. Even more specific.

• 89: Other. This is a very broad residual category.

  Tax: * Basic Duty: 5.3% * Additional Duty: 7.5% * Total Tax: 42.8% * Considerations: Since this is a very broad category, ensure the material composition is primarily plastic. If other materials significantly contribute to the product's function, a different HS code might be more appropriate.

2. HS Code: 7318.15.20.30 – Screws, bolts, nuts, etc., of iron or steel

• 73: Iron or steel articles.
• 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc.
• 15: Threaded articles.
• 20: Other screws and bolts, whether or not with nuts/washers.

• 30: Structural bolts with shanks/threads < 6mm.

  Tax: * Basic Duty: 0.0% * Additional Duty: 25.0% * Total Tax: 80.0% (potentially higher with the 2025.4.2 changes) * Considerations: The diameter of the threads is critical here. If the diameter is 6mm or greater, a different HS code within 7318.15 will apply (likely with a different tax rate). Also, the "entered or exported in the same shipment" clause is important – if nuts/washers are shipped separately, the code might change.

3. HS Code: 7318.29.00.00 – Screws, bolts, nuts, etc., of iron or steel (Non-threaded)

• 73: Iron or steel articles.
• 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc.
• 29: Non-threaded articles.

• 00: Other.

  Tax: * Basic Duty: 2.8% * Additional Duty: 25.0% * Total Tax: 82.8% * Considerations: Ensure these are completely non-threaded. Even partial threading could change the HS code.

4. HS Code: 7610.90.00.80 – Aluminum structures and parts

• 76: Aluminum and articles thereof.
• 10: Aluminum structures.
• 90: Other.
• 00: Other.

• 80: Other.

  Tax: * Basic Duty: 5.7% * Additional Duty: 25.0% * Total Tax: 85.7% * Considerations: If these are prefabricated buildings, a different HS code (9406) applies. The "parts of structures" clause is broad – ensure the parts are genuinely intended for structural use.

5. HS Code: 8201.90.60.00 – Handtools (Agriculture, Horticulture, Forestry)

• 82: Tools, implements, cutlery, etc.
• 01: Handtools.
• 90: Other handtools.

• 60: Other.

  Tax: * Basic Duty: 0.0% * Additional Duty: 25.0% * Total Tax: 55.0% * Considerations: Ensure these are specifically used in agriculture, horticulture, or forestry. General-purpose handtools might fall under a different HS code.

6. HS Code: 9620.00.55.00 – Monopods, Bipods, Tripods (Wood)

• 96: Miscellaneous manufactured articles.
• 20: Monopods, bipods, tripods.
• 00: Other.

• 55: Of wood.

  Tax: * Basic Duty: 3.3% * Additional Duty: 25.0% * Total Tax: 58.3% * Considerations: The "of wood" clause is critical. If made of metal or other materials, a different HS code applies.

Recommendations & Next Steps:

1. Material Verification: Double-check the primary material composition of each item. This is the most important factor in determining the correct HS code.
2. Detailed Specifications: Provide detailed specifications (dimensions, thread diameter, intended use) for each item to your customs broker.
3. 2025.4.2 Changes: Be prepared for potential tax increases after April 2nd, 2025.
4. Certifications: Depending on the end-use of the products, you might need specific certifications (e.g., safety standards).
5. Consult a Broker: I strongly recommend working with a qualified customs broker in China. They can provide expert guidance and ensure compliance with all regulations.
6. Single Shipment Rule: If you are importing multiple items, clarify whether they are being shipped in the same consignment. This can affect the HS code classification.

Disclaimer: I am an AI assistant and cannot provide definitive customs advice. This information is for general guidance only. Always consult with a qualified customs broker for accurate and up-to-date information.