Find HS Code and trade information for IRRIGATION SYSTEM KITS

Okay, let's break down the classification and potential import considerations for your "IRRIGATION SYSTEM KITS" based on the provided HS codes.

IRRIGATION SYSTEM KITS – HS Code Analysis & Import Guidance

Here's a detailed look at each item, its HS code, and what you need to know for import purposes. We'll follow a structured approach, explaining each part of the HS code and highlighting key considerations.

Important Note: "IRRIGATION SYSTEM KITS" is a broad description. The accuracy of these classifications depends heavily on the exact composition of the kits. These are based on the descriptions provided; if the kit contains items not covered here, additional HS codes may be needed.

1. Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of other plastics Less than 200 mm in length

• HS Code: 3917.29.00.50

• Breakdown:

  • 39: Plastics and articles thereof. This chapter covers a wide range of plastic products.
  • 17: Tubes, pipes and hoses and fittings therefor. Specifically focuses on plastic tubing and related components.
  • 29: Other plastics. This indicates the tubes, pipes and hoses are made from plastics other than those specifically mentioned in earlier subheadings (like PVC).
  • 00: Further specifies the product.
  • 50: Indicates a specific national tariff code, often related to length or other characteristics. In this case, it specifies rigid tubes, pipes and hoses less than 200mm in length.

• Tax Implications (as provided):

  • Basic Duty: 3.1%
  • Additional Duty: 25.0% (until April 2, 2025)
  • Additional Duty (after April 2, 2025): 30.0%
  • Total Tax: 58.1%

• Key Considerations:

  • Plastic Type: Confirm the exact type of plastic used. If it falls under a more specific subheading (e.g., PVC, polyethylene), the HS code and duty rates could change.
  • Dimensions: The length specification (less than 200mm) is crucial. If any tubes exceed this length, a different HS code will be required.
  • Fittings: Are the fittings included in this HS code? If they are made of a different material (e.g., metal), they will need their own HS code.
  • Certification: Depending on the application of the irrigation system (e.g., potable water), you may need certifications related to material safety (e.g., NSF certification).

2. Other articles of copper: Other

• HS Code: 7419.80.00

• Breakdown:

  • 74: Copper and articles thereof. This chapter covers all copper products.
  • 19: Other articles of copper. This is a broad category for copper items not specifically classified elsewhere.
  • 80: Further specifies the product.
  • 00: Indicates a specific national tariff code.

• Tax Implications (as provided):

  • Tax Information: Failed to retrieve tax information.
  • Total Tax: Error

• Key Considerations:

  • Detailed Description: "Other" is very broad. You must provide a more specific description of the copper articles (e.g., copper connectors, copper valves, copper fittings). This is critical for accurate HS code classification.
  • Alloy Composition: If the copper articles are an alloy (e.g., brass, bronze), the HS code will be different.
  • Function: What is the specific function of these copper articles within the irrigation system?
  • Tax Rate: The "Error" status indicates that tax information is unavailable. You must obtain the correct tax rate from your customs broker or the relevant customs authority.
  • Material Purity: The purity of the copper can affect the HS code and duty rate.

General Recommendations:

• Consult a Customs Broker: I strongly recommend working with a qualified customs broker in China and your destination country. They can provide expert guidance on HS code classification, duty rates, and import regulations.
• Detailed Packing List & Invoice: Provide a very detailed packing list and commercial invoice that clearly describes each item in the kit, its material composition, dimensions, and function.
• Material Safety Data Sheets (MSDS): For plastic components, provide MSDS to demonstrate compliance with safety regulations.
• Certifications: Determine if any certifications are required for the irrigation system based on its intended use (e.g., potable water, agricultural use).
• Country of Origin: Ensure you have accurate documentation proving the country of origin for each component.

Disclaimer: I am an AI assistant and cannot provide definitive legal or customs advice. This information is for general guidance only. Always consult with qualified professionals for specific import requirements.