| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 8807909060 | Doc | 55.0% | CN | US | 2025-05-12 |
| 8807300060 | Doc | 80.0% | CN | US | 2025-05-12 |
| 7318158020 | Doc | 88.5% | CN | US | 2025-05-12 |
| 7318152095 | Doc | 80.0% | CN | US | 2025-05-12 |
LOCK SCREW HS Code Classification & Duty Information
Based on the provided reference data and the declared commodity "LOCK SCREW", here's a breakdown of potential HS code classifications and associated duties. It's crucial to determine the precise material and specifications of the lock screw for accurate classification.
Important Note: The following classifications are based on the limited information provided. Final determination rests with customs authorities.
1. 7318158020 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Other screws and bolts, whether or not with their nuts or washers: Other: Having shanks or threads with a diameter of 6 mm or more Set screws**
- 73: Articles of iron or steel. This chapter covers a wide range of iron and steel products.
- 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc. This narrows down the category to fasteners.
- 15: Threaded articles (screws, bolts, etc.). Specifies that the items are threaded.
- 80: Other screws and bolts. This is a residual subheading for screws and bolts not specifically classified elsewhere.
- 20: Having shanks or threads with a diameter of
6 mm or more Set screws. Further specifies the diameter and type. - Duty:
- Basic Duty: 8.5%
- Additional Duty: 25.0%
- Post 2025.4.2 Additional Duty: 30%
- Additional Duty (Steel/Aluminum): 25%
- Total Duty: 88.5%
Applicability: This HS code is suitable if the lock screw is made of iron or steel, has a shank or thread diameter of 6mm or more, and is classified as a set screw.
2. 7318152095 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Other screws and bolts, whether or not with their nuts or washers: Bolts and bolts and their nuts or washers entered or exported in the same shipment Having shanks or threads with a diameter of 6 mm or more: Other: Other: Other**
- 73: Articles of iron or steel.
- 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc.
- 15: Threaded articles.
- 20: Bolts and bolts and their nuts or washers entered or exported in the same shipment. This applies if the lock screw is shipped with its corresponding nut(s).
- 95: Other. This is a residual subheading for bolts not specifically classified elsewhere.
- Duty:
- Basic Duty: 0.0%
- Additional Duty: 25.0%
- Post 2025.4.2 Additional Duty: 30%
- Additional Duty (Steel/Aluminum): 25%
- Total Duty: 80.0%
Applicability: This HS code is suitable if the lock screw is made of iron or steel, is shipped with its nut(s), and has a shank or thread diameter of 6mm or more.
3. 7318158020 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Other screws and bolts, whether or not with their nuts or washers: Other: Having shanks or threads with a diameter of 6 mm or more Set screws**
- 73: Articles of iron or steel.
- 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc.
- 15: Threaded articles.
- 80: Other screws and bolts.
- 20: Having shanks or threads with a diameter of
6 mm or more Set screws. - Duty:
- Basic Duty: 8.5%
- Additional Duty: 25.0%
- Post 2025.4.2 Additional Duty: 30%
- Additional Duty (Steel/Aluminum): 25%
- Total Duty: 88.5%
Applicability: This HS code is suitable if the lock screw is made of iron or steel, has a shank or thread diameter of 6mm or more, and is classified as a set screw.
Important Considerations & Recommendations:
- Material: The material composition (e.g., carbon steel, stainless steel, alloy steel) is critical for accurate classification.
- Diameter: Precisely measure the shank or thread diameter.
- Shipment Details: Confirm whether the lock screw is being shipped with its corresponding nut(s).
- Certification: Depending on the end-use application, specific certifications (e.g., RoHS, REACH) may be required.
- Consultation: It is highly recommended to consult with a licensed customs broker or the customs authorities to confirm the correct HS code and ensure compliance with all applicable regulations.
- Post 2025.4.2 Duty Changes: Be aware of the duty increases scheduled for April 2, 2025.