| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 3901105020 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3901905501 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3921905050 | Doc | 34.8% | CN | US | 2025-05-12 |
| 3920100000 | Doc | 59.2% | CN | US | 2025-05-12 |
| 3901400000 | Doc | 61.5% | CN | US | 2025-05-12 |
Here is the structured classification and tariff information for Low Density Polyethylene (LDPE) raw material for co-extruded film, based on the provided HS codes and tax details:
🔍 Product Classification Overview
Product Name: Low Density Polyethylene (LDPE) Raw Material for Co-extruded Film
Material Type: Polyethylene (PE), specifically Low Density Polyethylene (LDPE)
Usage: Used in the production of co-extruded films (e.g., packaging, agricultural films, etc.)
📦 Applicable HS Codes and Tax Rates
1. HS Code: 3901105020
- Description: Non-linear low-density polyethylene
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is specific to non-linear LDPE, which may refer to branched or modified LDPE.
2. HS Code: 3901905501
- Description: Ethylene copolymers
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This may include LDPE-like materials or modified ethylene-based polymers.
3. HS Code: 3921905050
- Description: Plastic sheets, plates, films (e.g., LDPE film)
- Total Tax Rate: 34.8%
- Base Tariff: 4.8%
- Additional Tariff: 0.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code applies to finished LDPE film products, not raw material. Not recommended for raw material classification.
4. HS Code: 3920100000
- Description: Non-cellular plastics and non-reinforced plastics
- Total Tax Rate: 59.2%
- Base Tariff: 4.2%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is a broader category and may not be the most accurate for LDPE raw material.
5. HS Code: 3901400000
- Description: Ethylene polymers with specific density (<0.94)
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is likely the most accurate code for LDPE raw material, as it specifies ethylene polymers with a density less than 0.94, which is typical for LDPE.
⚠️ Important Notes and Alerts
-
April 11, 2025 Special Tariff:
A 30.0% additional tariff will be imposed on all the above HS codes after April 11, 2025. This is a time-sensitive policy and must be accounted for in cost estimation and customs planning. -
Anti-dumping duties:
Not applicable for polyethylene raw materials (no specific anti-dumping duties listed for this product category). -
Certifications Required:
- Confirm the material specifications (e.g., density, branching, Melt Flow Index) to ensure correct HS code classification.
- Verify certifications such as REACH, RoHS, or other regulatory compliance documents if exporting to the EU or other regions.
✅ Proactive Advice for Users
- Verify Material Specifications: Ensure the LDPE material meets the criteria for the selected HS code (e.g., density, polymer type, branching).
- Check Unit Price and Tax Impact: The 30.0% additional tariff after April 11, 2025, could significantly increase the total cost. Consider this in pricing and contract negotiations.
- Consult Customs Broker: For accurate classification and compliance, especially if the product is close to the boundary of multiple HS codes.
- Maintain Documentation: Keep records of material testing, supplier certificates, and product specifications for customs audits.
Let me know if you need help with HS code selection based on specific product parameters or documentation requirements. Here is the structured classification and tariff information for Low Density Polyethylene (LDPE) raw material for co-extruded film, based on the provided HS codes and tax details:
🔍 Product Classification Overview
Product Name: Low Density Polyethylene (LDPE) Raw Material for Co-extruded Film
Material Type: Polyethylene (PE), specifically Low Density Polyethylene (LDPE)
Usage: Used in the production of co-extruded films (e.g., packaging, agricultural films, etc.)
📦 Applicable HS Codes and Tax Rates
1. HS Code: 3901105020
- Description: Non-linear low-density polyethylene
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code is specific to non-linear LDPE, which may refer to branched or modified LDPE.
2. HS Code: 3901905501
- Description: Ethylene copolymers
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This may include LDPE-like materials or modified ethylene-based polymers.
3. HS Code: 3921905050
- Description: Plastic sheets, plates, films (e.g., LDPE film)
- Total Tax Rate: 34.8%
- Base Tariff: 4.8%
- Additional Tariff: 0.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This code applies to finished LDPE film products, not raw material. Not recommended for raw material classification.
4. HS Code: 3920100000
- Description: Non-cellular plastics and non-reinforced plastics
- Total Tax Rate: 59.2%
- Base Tariff: 4.2%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is a broader category and may not be the most accurate for LDPE raw material.
5. HS Code: 3901400000
- Description: Ethylene polymers with specific density (<0.94)
- Total Tax Rate: 61.5%
- Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Note: This is likely the most accurate code for LDPE raw material, as it specifies ethylene polymers with a density less than 0.94, which is typical for LDPE.
⚠️ Important Notes and Alerts
-
April 11, 2025 Special Tariff:
A 30.0% additional tariff will be imposed on all the above HS codes after April 11, 2025. This is a time-sensitive policy and must be accounted for in cost estimation and customs planning. -
Anti-dumping duties:
Not applicable for polyethylene raw materials (no specific anti-dumping duties listed for this product category). -
Certifications Required:
- Confirm the material specifications (e.g., density, branching, Melt Flow Index) to ensure correct HS code classification.
- Verify certifications such as REACH, RoHS, or other regulatory compliance documents if exporting to the EU or other regions.
✅ Proactive Advice for Users
- Verify Material Specifications: Ensure the LDPE material meets the criteria for the selected HS code (e.g., density, polymer type, branching).
- Check Unit Price and Tax Impact: The 30.0% additional tariff after April 11, 2025, could significantly increase the total cost. Consider this in pricing and contract negotiations.
- Consult Customs Broker: For accurate classification and compliance, especially if the product is close to the boundary of multiple HS codes.
- Maintain Documentation: Keep records of material testing, supplier certificates, and product specifications for customs audits.
Let me know if you need help with HS code selection based on specific product parameters or documentation requirements.
Customer Reviews
No reviews yet.