| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 3913905000 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3913905000 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3913905000 | Doc | 61.5% | CN | US | 2025-05-12 |
| 3824991100 | Doc | 55.0% | CN | US | 2025-05-12 |
| 3824994190 | Doc | 59.6% | CN | US | 2025-05-12 |
Here is the structured and professional breakdown of the HS codes and associated tariffs for the Natural Polymer Mold Additives product classification:
📦 Product Classification Overview
All products fall under HS Code 3913.90.50.00 and 3824.99.11.00, 3824.99.41.90, depending on the specific material and form.
📊 HS Code: 3913.90.50.00
Product Types:
- Natural polymer sheet raw material
- Natural polymer granules
- Modified natural polymer powder
Tariff Breakdown:
- Base Tariff Rate: 6.5%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 61.5%
Key Notes: - This code applies to various forms of natural polymer materials used in mold additives. - The April 11, 2025 special tariff significantly increases the total tax burden. - Ensure the product is correctly classified based on its material type and physical form (sheet, granule, powder).
📊 HS Code: 3824.99.11.00
Product Type: - Mold-use chemical adhesive
Tariff Breakdown:
- Base Tariff Rate: 0.0%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 55.0%
Key Notes: - This code applies to chemical adhesives used in mold applications. - No base tariff, but the additional and special tariffs still apply. - Confirm the chemical composition and intended use to ensure correct classification.
📊 HS Code: 3824.99.41.90
Product Type: - Plant-based fat casting mold adhesive
Tariff Breakdown:
- Base Tariff Rate: 4.6%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 59.6%
Key Notes: - This code applies to plant-based fat adhesives used in casting molds. - The base tariff is slightly higher than the chemical adhesive (3824.99.11.00). - Ensure the raw material source (plant-based fat) is clearly documented.
⚠️ Important Alerts and Recommendations
- April 11, 2025 Special Tariff: All products listed are subject to an additional 30.0% tariff after this date. This is a time-sensitive policy and may significantly increase import costs.
- Anti-dumping duties: Not currently applicable for these products, but always verify with the latest customs updates.
- Certifications: Confirm if any product certifications (e.g., REACH, RoHS, or specific import permits) are required for the destination country.
- Material Verification: Ensure the material composition and physical form match the HS code description to avoid misclassification and penalties.
✅ Proactive Advice for Importers
- Double-check the product form (sheet, granule, powder, adhesive) and material source (natural polymer, plant-based fat, chemical adhesive).
- Review the April 11, 2025 tariff change and plan accordingly for cost estimation.
- Consult customs or a compliance expert if the product is a blend or modified form of multiple materials.
- Keep documentation (e.g., material safety data sheets, product specifications) ready for customs inspection.
Let me know if you need help with tariff calculation, certification requirements, or customs documentation for these products. Here is the structured and professional breakdown of the HS codes and associated tariffs for the Natural Polymer Mold Additives product classification:
📦 Product Classification Overview
All products fall under HS Code 3913.90.50.00 and 3824.99.11.00, 3824.99.41.90, depending on the specific material and form.
📊 HS Code: 3913.90.50.00
Product Types:
- Natural polymer sheet raw material
- Natural polymer granules
- Modified natural polymer powder
Tariff Breakdown:
- Base Tariff Rate: 6.5%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 61.5%
Key Notes: - This code applies to various forms of natural polymer materials used in mold additives. - The April 11, 2025 special tariff significantly increases the total tax burden. - Ensure the product is correctly classified based on its material type and physical form (sheet, granule, powder).
📊 HS Code: 3824.99.11.00
Product Type: - Mold-use chemical adhesive
Tariff Breakdown:
- Base Tariff Rate: 0.0%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 55.0%
Key Notes: - This code applies to chemical adhesives used in mold applications. - No base tariff, but the additional and special tariffs still apply. - Confirm the chemical composition and intended use to ensure correct classification.
📊 HS Code: 3824.99.41.90
Product Type: - Plant-based fat casting mold adhesive
Tariff Breakdown:
- Base Tariff Rate: 4.6%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 59.6%
Key Notes: - This code applies to plant-based fat adhesives used in casting molds. - The base tariff is slightly higher than the chemical adhesive (3824.99.11.00). - Ensure the raw material source (plant-based fat) is clearly documented.
⚠️ Important Alerts and Recommendations
- April 11, 2025 Special Tariff: All products listed are subject to an additional 30.0% tariff after this date. This is a time-sensitive policy and may significantly increase import costs.
- Anti-dumping duties: Not currently applicable for these products, but always verify with the latest customs updates.
- Certifications: Confirm if any product certifications (e.g., REACH, RoHS, or specific import permits) are required for the destination country.
- Material Verification: Ensure the material composition and physical form match the HS code description to avoid misclassification and penalties.
✅ Proactive Advice for Importers
- Double-check the product form (sheet, granule, powder, adhesive) and material source (natural polymer, plant-based fat, chemical adhesive).
- Review the April 11, 2025 tariff change and plan accordingly for cost estimation.
- Consult customs or a compliance expert if the product is a blend or modified form of multiple materials.
- Keep documentation (e.g., material safety data sheets, product specifications) ready for customs inspection.
Let me know if you need help with tariff calculation, certification requirements, or customs documentation for these products.
Customer Reviews
No reviews yet.