Find HS Code and trade information for Plastic tubes for drinking water

Product Classification: Plastic Tubes for Drinking Water

Based on the provided HS codes and descriptions, the plastic tubes for drinking water fall under Chapter 3917 of the Harmonized System (HS), which covers Plastic pipes, tubes, and hoses, of plastics, whether or not fitted with couplings or other fittings. Below is a structured breakdown of the classification and associated tariffs:

HS CODES AND TAX DETAILS

• HS CODE: 3917320050
• Description: Plastic drinking water tubes, classified under the general category of plastic pipes.
• Total Tax Rate: 58.1%
• Breakdown:
  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• Note: This code is repeated in the input, but the classification remains consistent.

• HS CODE: 3917310000

• Description: Drinking water plastic tubes, which must meet a minimum burst pressure of 27.6 MPa.
• Total Tax Rate: 58.1%

• Breakdown:

  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• HS CODE: 3917320020

• Description: Polyethylene drinking water tubes, specifically for plastic pipes and fittings.
• Total Tax Rate: 58.1%

• Breakdown:

  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• HS CODE: 3917210000

• Description: Rigid plastic pipes made from ethylene polymers, suitable for water supply.
• Total Tax Rate: 58.1%
• Breakdown:
  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

Key Tax Rate Changes and Alerts

• April 11, 2025 Special Tariff:
• An additional 30.0% tariff will be imposed on all the above HS codes after April 11, 2025.

• This is a time-sensitive policy and must be considered in cost planning and customs clearance.

• Anti-dumping duties:

• No specific anti-dumping duties are mentioned for this product category in the provided data.
• However, it is advisable to check for any anti-dumping or countervailing duties that may apply depending on the country of origin and import regulations.

Proactive Advice for Importers

• Verify Material and Unit Price:

• Confirm the material composition (e.g., polyethylene, PVC, etc.) and unit price to ensure correct HS code classification and tax calculation.

• Check Required Certifications:

• Plastic drinking water tubes may require safety certifications (e.g., NSF/ANSI 61, GB/T 17219, etc.) to ensure compliance with drinking water standards.

• Monitor Tariff Updates:

• Stay informed about tariff changes after April 11, 2025, as they may significantly impact import costs.

• Consult Customs Brokers:

• For complex classifications or large shipments, consider engaging a customs broker or compliance expert to avoid delays or penalties.

Summary

Let me know if you need help with certification requirements or customs documentation for this product.

Product Classification: Plastic Tubes for Drinking Water

Based on the provided HS codes and descriptions, the plastic tubes for drinking water fall under Chapter 3917 of the Harmonized System (HS), which covers Plastic pipes, tubes, and hoses, of plastics, whether or not fitted with couplings or other fittings. Below is a structured breakdown of the classification and associated tariffs:

HS CODES AND TAX DETAILS

• HS CODE: 3917320050
• Description: Plastic drinking water tubes, classified under the general category of plastic pipes.
• Total Tax Rate: 58.1%
• Breakdown:
  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• Note: This code is repeated in the input, but the classification remains consistent.

• HS CODE: 3917310000

• Description: Drinking water plastic tubes, which must meet a minimum burst pressure of 27.6 MPa.
• Total Tax Rate: 58.1%

• Breakdown:

  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• HS CODE: 3917320020

• Description: Polyethylene drinking water tubes, specifically for plastic pipes and fittings.
• Total Tax Rate: 58.1%

• Breakdown:

  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

• HS CODE: 3917210000

• Description: Rigid plastic pipes made from ethylene polymers, suitable for water supply.
• Total Tax Rate: 58.1%
• Breakdown:
  • Base Tariff: 3.1%
  • Additional Tariff: 25.0%
  • Special Tariff after April 11, 2025: 30.0%

Key Tax Rate Changes and Alerts

• April 11, 2025 Special Tariff:
• An additional 30.0% tariff will be imposed on all the above HS codes after April 11, 2025.

• This is a time-sensitive policy and must be considered in cost planning and customs clearance.

• Anti-dumping duties:

• No specific anti-dumping duties are mentioned for this product category in the provided data.
• However, it is advisable to check for any anti-dumping or countervailing duties that may apply depending on the country of origin and import regulations.

Proactive Advice for Importers

• Verify Material and Unit Price:

• Confirm the material composition (e.g., polyethylene, PVC, etc.) and unit price to ensure correct HS code classification and tax calculation.

• Check Required Certifications:

• Plastic drinking water tubes may require safety certifications (e.g., NSF/ANSI 61, GB/T 17219, etc.) to ensure compliance with drinking water standards.

• Monitor Tariff Updates:

• Stay informed about tariff changes after April 11, 2025, as they may significantly impact import costs.

• Consult Customs Brokers:

• For complex classifications or large shipments, consider engaging a customs broker or compliance expert to avoid delays or penalties.

Summary

Let me know if you need help with certification requirements or customs documentation for this product.