Find HS Code and trade information for Polyester Resin for Molding

Product Name: Polyester Resin for Molding
Classification HS Code Analysis and Tax Overview

Below is a structured breakdown of the HS codes and associated tariffs for polyester resin for molding, based on the provided data:

🔍 HS Code: 9606214000

Product Description: Polyester resin for molding (snap-fit molds)
Total Tax Rate: 0.3¢/line/gross + 4.6% + 55.0%
Breakdown: - Base Tariff: 0.3¢/line/gross + 4.6%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code includes a per-line/gross tariff, which may vary depending on the product's unit of measurement and quantity.
Proactive Advice: Confirm the unit of measurement and price per unit to ensure accurate tax calculation.

🔍 HS Code: 3824999330

Product Description: Resin for mold repair
Total Tax Rate: 60.0%
Breakdown: - Base Tariff: 5.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code applies to resin used for mold repair, not for the production of the mold itself.
Proactive Advice: Ensure the product is not classified as a mold but as a repair material to avoid misclassification.

🔍 HS Code: 3907915000

Product Description: Unsaturated polyester resin for mold material
Total Tax Rate: 61.5%
Breakdown: - Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code is for unsaturated polyester resins used in mold materials.
Proactive Advice: Confirm the chemical composition and intended use to ensure proper classification.

🔍 HS Code: 8480100000

Product Description: Resin mold for casting
Total Tax Rate: 58.8%
Breakdown: - Base Tariff: 3.8%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code applies to molds used in casting, not the resin itself.
Proactive Advice: Clarify whether the product is the mold or the resin used in the mold to avoid misclassification.

🔍 HS Code: 8480718020

Product Description: Plastic mold
Total Tax Rate: 58.1%
Breakdown: - Base Tariff: 3.1%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code is for plastic molds, not the resin used in them.
Proactive Advice: Ensure the product is not a resin but a mold made of plastic.

📌 Key Tax Rate Changes (April 11, 2025 onwards):

• All codes will see an increase of 5% in the additional tariff (from 25.0% to 30.0%).
• This is a time-sensitive policy, so importers must plan accordingly.

🛑 Important Reminders:

• Verify the product's exact description (e.g., is it a resin, a mold, or a repair material?).
• Check the unit of measurement and price per unit for accurate tax calculation.
• Confirm the material composition (e.g., unsaturated polyester, etc.) to ensure correct HS code.
• Review required certifications (e.g., REACH, RoHS, etc.) for compliance with import regulations.

Let me know if you need help with certification requirements or customs documentation. Product Name: Polyester Resin for Molding
Classification HS Code Analysis and Tax Overview

Below is a structured breakdown of the HS codes and associated tariffs for polyester resin for molding, based on the provided data:

🔍 HS Code: 9606214000

Product Description: Polyester resin for molding (snap-fit molds)
Total Tax Rate: 0.3¢/line/gross + 4.6% + 55.0%
Breakdown: - Base Tariff: 0.3¢/line/gross + 4.6%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code includes a per-line/gross tariff, which may vary depending on the product's unit of measurement and quantity.
Proactive Advice: Confirm the unit of measurement and price per unit to ensure accurate tax calculation.

🔍 HS Code: 3824999330

Product Description: Resin for mold repair
Total Tax Rate: 60.0%
Breakdown: - Base Tariff: 5.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code applies to resin used for mold repair, not for the production of the mold itself.
Proactive Advice: Ensure the product is not classified as a mold but as a repair material to avoid misclassification.

🔍 HS Code: 3907915000

Product Description: Unsaturated polyester resin for mold material
Total Tax Rate: 61.5%
Breakdown: - Base Tariff: 6.5%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code is for unsaturated polyester resins used in mold materials.
Proactive Advice: Confirm the chemical composition and intended use to ensure proper classification.

🔍 HS Code: 8480100000

Product Description: Resin mold for casting
Total Tax Rate: 58.8%
Breakdown: - Base Tariff: 3.8%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code applies to molds used in casting, not the resin itself.
Proactive Advice: Clarify whether the product is the mold or the resin used in the mold to avoid misclassification.

🔍 HS Code: 8480718020

Product Description: Plastic mold
Total Tax Rate: 58.1%
Breakdown: - Base Tariff: 3.1%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
Note: This code is for plastic molds, not the resin used in them.
Proactive Advice: Ensure the product is not a resin but a mold made of plastic.

📌 Key Tax Rate Changes (April 11, 2025 onwards):

• All codes will see an increase of 5% in the additional tariff (from 25.0% to 30.0%).
• This is a time-sensitive policy, so importers must plan accordingly.

🛑 Important Reminders:

• Verify the product's exact description (e.g., is it a resin, a mold, or a repair material?).
• Check the unit of measurement and price per unit for accurate tax calculation.
• Confirm the material composition (e.g., unsaturated polyester, etc.) to ensure correct HS code.
• Review required certifications (e.g., REACH, RoHS, etc.) for compliance with import regulations.

Let me know if you need help with certification requirements or customs documentation.