Find HS Code and trade information for SAND WHEEL SANDING PIECES

Okay, let's break down the HS codes and tax implications for your declared items – "SAND WHEEL SANDING PIECES". Here's a structured analysis to help you understand the classification and potential costs:

Understanding HS Codes – A Quick Primer

HS codes (Harmonized System codes) are internationally standardized codes used to classify traded products. The first 6 digits are generally consistent worldwide, while the last digits can vary by country. Here's what the digits generally represent:

• Chapter (First 2 digits): Broad category of the product.
• Heading (Next 2 digits): More specific grouping within the chapter.
• Subheading (Next 2 digits): Further refinement of the product.
• Last Digits: National specific codes for even more detail.

Analysis of Your Declared Items

Let's examine each HS code individually:

1. HS Code: 6804.22.40.00 – "Millstones, grindstones, grinding wheels and the like..."

• Chapter 68: Articles of stone, plaster, cement, asbestos, mica or similar materials. This indicates the product is made of abrasive materials.
• Heading 6804: Millstones, grindstones, grinding wheels and the like. This narrows it down to grinding/abrasive tools.
• Subheading 6804.22: Of other agglomerated abrasives or of ceramics. This specifies the material composition – likely bonded abrasives or ceramic materials.
• Last Digits .40.00: Further specifies the type of abrasive wheel.

Tax Implications:

• Basic Duty: 0.0%
• Additional Tariff: 25.0%
• Post April 2, 2025: Additional Tariff increases to 30.0%
• Total Tax: 55.0%

Important Notes:

• Material Composition is Key: The classification hinges on the exact composition of the abrasive wheel. If it contains significant amounts of natural stone, the code might be different.
• Bonding Agent: The type of bonding agent used (resin, rubber, etc.) can also influence the classification.

2. HS Code: 8205.51.75.00 – "Handtools (including glass cutters) not elsewhere specified..."

• Chapter 82: Tools, implements, cutlery, hand tools, articles of cutlery, and similar articles.
• Heading 8205: Handtools (including glass cutters) not elsewhere specified or included. This suggests the item is a hand-held tool.
• Subheading 8205.51: Other handtools (including glass cutters) and parts thereof.
• Last Digits .75.00: Household tools, and parts thereof.

Tax Implications:

• Basic Duty: 3.7%
• Additional Tariff: 25.0%
• Post April 2, 2025: Additional Tariff increases to 30.0%
• Total Tax: 58.7%

Important Notes:

• Framework is Critical: The presence of a framework (a supporting structure) would likely shift this to a different classification. If it's a wheel with a framework, it's not this code.
• Power Source: If the wheel is powered (electric, pneumatic), it will fall under a different HS code.

3. HS Code: 3926.90.99.89 – "Other articles of plastics and articles of other materials..."

• Chapter 39: Plastics and articles thereof.
• Heading 3926: Other articles of plastics and articles of other materials.
• Subheading 3926.90: Other.
• Last Digits .99.89: Other Other.

Tax Implications:

• Basic Duty: 5.3%
• Additional Tariff: 7.5%
• Post April 2, 2025: Additional Tariff increases to 30.0%
• Total Tax: 42.8%

Important Notes:

• Material Composition is Key: This code is a "catch-all" for plastic articles. If the sanding pieces are primarily made of plastic, this code might be appropriate. However, if they contain significant amounts of abrasive material, one of the other codes is more likely.
• Functionality: The primary function of the item is important. If it's designed for sanding/grinding, the codes under Chapter 68 are more appropriate.

Recommendations & Next Steps

1. Verify Material Composition: Crucially, confirm the exact materials used in each sanding piece. This is the biggest factor in determining the correct HS code.
2. Framework Presence: Determine if any of the sanding pieces have a supporting framework.
3. Single vs. Multiple Codes: If you have different types of sanding pieces (e.g., some with frameworks, some without), you may need to use multiple HS codes.
4. Provide More Detail: If possible, provide a detailed product specification sheet or a sample of the sanding pieces to a customs broker for a more accurate classification.
5. Consider Certification: Depending on the end-use of the sanding pieces, you may need to obtain specific certifications (e.g., safety certifications).
6. Monitor Tariff Changes: Be aware of the upcoming tariff changes on April 2, 2025, and factor them into your cost calculations.

Disclaimer: I am an AI assistant and cannot provide definitive customs classification advice. This information is for general guidance only. It is essential to consult with a qualified customs broker or import specialist for accurate classification and compliance.