Find HS Code and trade information for SCREW

Product Classification Report: Screws
Based on the provided HS codes and tariff details, here is a structured breakdown of the classification and tax implications for screws:

✅ HS CODE: 7318154000

Description: Iron or steel screws, bolts, etc., with threads.
Total Tax Rate: 105.0%
Tax Details:
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- After April 11, 2025: Additional tariff increases to 30.0%
- Steel and Aluminum Products: Additional tariff of 50%

Key Notes:
- This is the most common classification for steel screws.
- High tax burden due to the combination of base and additional tariffs.
- Time-sensitive: Tariff increases after April 11, 2025.

Proactive Advice:
- Confirm the material (e.g., steel vs. aluminum) to determine the correct tariff.
- Check if certifications (e.g., origin, compliance) are required for duty exemptions or reductions.

✅ HS CODE: 7415390000

Description: Other threaded articles of copper, iron, or steel, including steel screws.
Total Tax Rate: 58.0%
Tax Details:
- Base Tariff Rate: 3.0%
- Additional Tariff: 25.0%
- After April 11, 2025: Additional tariff increases to 30.0%

Key Notes:
- This code may apply to steel screws that are not specifically classified under 7318154000.
- Lower base tariff compared to 7318154000, but still subject to additional tariffs.
- Time-sensitive: Tariff increases after April 11, 2025.

Proactive Advice:
- Ensure the product description matches the HS code.
- Verify if the material is steel or copper, as this affects classification.

✅ HS CODE: 7217905030

Description: Iron or non-alloy steel wire, other, with carbon content less than 0.25%, used for screws.
Total Tax Rate: 30.0%
Tax Details:
- Base Tariff Rate: 0.0%
- Additional Tariff: 0.0%
- After April 11, 2025: Additional tariff increases to 30.0%

Key Notes:
- This code applies to wire used for screws, not the finished product.
- Lower tax burden compared to other codes.
- Time-sensitive: Tariff increases after April 11, 2025.

Proactive Advice:
- This code is for raw materials, not finished screws.
- Ensure the product is not classified as wire if it is a finished screw.

✅ HS CODE: 9011900000

Description: Parts and accessories of compound microscopes.
Total Tax Rate: 55.0%
Tax Details:
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- After April 11, 2025: Additional tariff increases to 30.0%

Key Notes:
- This code is not relevant for standard screws.
- Likely a misclassification if the product is a general-purpose screw.

Proactive Advice:
- Double-check the product description and intended use.
- Avoid using this code unless the screw is specifically for microscope parts.

✅ HS CODE: 7318156040

Description: Iron or steel bolts, nuts, studs, etc., with diameter less than 6mm.
Total Tax Rate: 111.2%
Tax Details:
- Base Tariff Rate: 6.2%
- Additional Tariff: 25.0%
- After April 11, 2025: Additional tariff increases to 30.0%
- Steel and Aluminum Products: Additional tariff of 50%

Key Notes:
- This code applies to small-diameter steel screws.
- Highest tax burden due to the combination of base and additional tariffs.
- Time-sensitive: Tariff increases after April 11, 2025.

Proactive Advice:
- Confirm the diameter of the screw to ensure correct classification.
- Check for anti-dumping duties if the product is imported from certain countries.

📌 Summary of Key Actions:

• Verify the material (steel, aluminum, copper, etc.) and product description.
• Check the diameter if the screw is classified under 7318156040.
• Confirm the HS code based on the product’s material, size, and use.
• Monitor the April 11, 2025 tariff increase and prepare for higher costs.
• Check for certifications or origin documentation to potentially reduce tariffs.

Let me know if you need help determining the correct HS code for your specific product.