| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 4409100500 | Doc | 58.2% | CN | US | 2025-05-12 |
| 4409299100 | Doc | 55.0% | CN | US | 2025-05-12 |
| 4418911000 | Doc | 55.0% | CN | US | 2025-05-12 |
| 4418919105 | Doc | 58.2% | CN | US | 2025-05-12 |
| 4701000000 | Doc | 55.0% | CN | US | 2025-05-12 |
Here's a classification of "WOODEN LISTING" based on the provided reference data. Given the broad nature of "WOODEN LISTING," several HS codes might apply depending on the specific product details.
-
4409.10.05.00: Coniferous Wood, Continuously Shaped.
- 44: Wood and articles of wood; wood charcoal. This chapter broadly covers wood products.
- 09: Sawn wood; wood in the rough. This specifies sawn wood or wood in a rough state.
- 10: Wood continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces. This indicates the wood has been processed with specific edge or face treatments.
- 05: Coniferous. This narrows it down to wood from coniferous trees (e.g., pine, fir, spruce).
- Applicable if the listing consists of shaped coniferous wood, such as tongue-and-groove flooring.
- Tax Rate: Base Duty 3.2%, Additional Duty 25.0%, Post 2025.4.2 Additional Duty 30%. Total 58.2%.
-
4409.29.91.00: Non-Coniferous Wood, Other.
- 44: Wood and articles of wood; wood charcoal.
- 09: Sawn wood; wood in the rough.
- 29: Other. This covers non-coniferous wood that doesn't fall into more specific categories.
- 91: Other. Further specifies "other" types of non-coniferous wood.
- Applicable if the listing consists of shaped non-coniferous wood (e.g., oak, maple, beech).
- Tax Rate: Base Duty 0.0%, Additional Duty 25.0%, Post 2025.4.2 Additional Duty 30%. Total 55.0%.
-
4418.91.10.00: Builders' Joinery and Carpentry of Wood, Of Bamboo, Drilled or Notched Lumber Studs.
- 44: Wood and articles of wood; wood charcoal.
- 18: Builders' joinery and carpentry. This covers wood used in construction.
- 91: Other. This covers other types of builders' joinery and carpentry.
- 10: Of bamboo, drilled or notched lumber studs. This specifies bamboo lumber studs.
- Applicable if the listing consists of bamboo lumber studs.
- Tax Rate: Base Duty 0.0%, Additional Duty 25.0%, Post 2025.4.2 Additional Duty 30%. Total 55.0%.
-
4418.91.91.05: Builders' Joinery and Carpentry of Wood, Of Bamboo, Other Wood Flooring.
- 44: Wood and articles of wood; wood charcoal.
- 18: Builders' joinery and carpentry.
- 91: Other.
- 91: Other.
- 05: Other Wood flooring.
- Applicable if the listing consists of bamboo wood flooring.
- Tax Rate: Base Duty 3.2%, Additional Duty 25.0%, Post 2025.4.2 Additional Duty 30%. Total 58.2%.
Important Considerations:
- Wood Type: The distinction between coniferous and non-coniferous wood is crucial for correct classification.
- Processing Level: "Shaped" wood (tongued, grooved, etc.) falls under 4409, while assembled joinery falls under 4418.
- Material Composition: If the listing includes composite wood products (e.g., plywood, MDF), different HS codes may apply.
- End Use: The intended use of the wood (e.g., construction, furniture) can also influence classification.
Recommendation:
Please provide more details about the "WOODEN LISTING" (wood type, processing level, intended use) for a more accurate HS code determination. It is also recommended to verify the material composition and intended use with the supplier and consult with a customs broker for specific guidance.