Find HS Code and trade information for a16 barbed rivet

A16 Barbed Rivet

An A16 barbed rivet is a type of blind rivet commonly utilized in fastening applications where access to both sides of the joined materials is limited or unavailable. It is characterized by its relatively large head and barbed shank, providing a strong, permanent, and vibration-resistant connection.

Material:

• Typically manufactured from aluminum alloy, specifically alloys like 2024-T4 or 5056-T6. These alloys offer a good balance of strength, corrosion resistance, and ductility.
• Steel rivets are also available for higher strength applications, though they are generally heavier and may require corrosion protection.

Purpose:

• To create a strong and reliable mechanical fastening joint in materials that are thin enough to accommodate the rivet's expansion process.
• Used in applications where welding or other permanent fastening methods are impractical or undesirable.

Function:

• The rivet consists of a head, a shank, and a mandrel (also known as a pin).
• Installation involves inserting the rivet through aligned holes in the materials to be joined.
• A specialized riveting tool pulls the mandrel, drawing the rivet body into the holes and expanding the sleeve.
• The expanded sleeve creates a clamping force between the materials.
• The mandrel breaks off at a predetermined break point when the correct clamping force is achieved, leaving a secure and permanent joint. The barbs on the sleeve dig into the material, resisting pull-out.

Usage Scenarios:

• Aerospace: Used in aircraft structures, interior panels, and other applications where lightweight and high strength are critical.
• Automotive: Employed in body panels, trim, and other automotive components.
• Construction: Utilized in sheet metal roofing, siding, and other construction applications.
• Electronics: Found in enclosures, brackets, and other electronic assemblies.
• General Manufacturing: Widely used in various industrial applications for joining sheet metal, plastics, and composite materials.

Common Types & Variations:

• CherryMAX Rivets: A high-strength variation designed for demanding applications, providing increased hole-fill capability and resistance to loosening.
• ProSet Rivets: Known for their consistent performance and ease of installation.
• Universal Rivets: A general-purpose type suitable for a wide range of applications.
• Close Tolerance Rivets: Designed for applications requiring precise hole alignment and consistent clamping force.
• Structural Rivets: Heavy-duty rivets used in applications requiring high shear and tensile strength.
• Different Head Styles: Available with various head styles, including flat, countersunk, and protruding heads, to meet specific aesthetic and functional requirements.
• Different Diameters and Lengths: Available in a wide range of diameters and lengths to accommodate different material thicknesses and joint requirements.

Based on the provided information, “a16 barbed rivet” can be classified under several HS codes, depending on its material and specific characteristics. Here's a breakdown:

• 7318230000: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Non-threaded articles: Rivets. This code applies if the rivet is made of iron or steel and is non-threaded.
• 8308203000: Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal: Tubular or bifurcated rivets: Of iron or steel and not brightened, not lathed and not machined. This code is applicable if the rivet is a tubular or bifurcated type, made of iron or steel, and hasn’t undergone brightening, lathing, or machining processes.
• 8308206000: Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal: Tubular or bifurcated rivets: Other. This code applies to tubular or bifurcated rivets made of iron or steel that have undergone brightening, lathing, or machining, or are made of other base metals.

Explanation of HS Code Structure (based on provided reference):

• Chapter 73: Covers articles of iron or steel.
• Heading 7318: Specifically covers screws, bolts, nuts, rivets, etc.
• Subheading 7318.23: Further defines non-threaded articles within the broader category, specifically rivets.
• Chapter 83: Covers miscellaneous manufactured articles of base metal.
• Heading 8308: Covers clasps, buckles, rivets, beads, and spangles.
• Subheading 8308.20: Further defines rivets, beads, and spangles of base metal.

Important Note:

According to the provided reference material, the total tax rate for HS codes 7318230000, 8308203000, and 8308206000 is 55.0% or 80.0%, depending on the specific code and material. For HS codes 7317006530 and 7317007500, the total tax rate is 80.0%. Please verify the material composition of the “a16 barbed rivet” to determine the correct HS code and applicable tax rate. Additionally, for HS codes 7317006530 and 7317007500, please note the additional 25% tax rate for steel and aluminum products.