Find HS Code and trade information for car foil tool

Car Foil Tool

A car foil tool, also known as a paintless dent repair (PDR) tool, is a specialized instrument used to remove dents and imperfections from a vehicle's bodywork without requiring traditional body filler and repainting. These tools manipulate the metal from behind the panel to restore its original shape.

Material:

• Steel: Commonly used for rods and levers due to its strength and ability to withstand force. Alloys are often employed for specific properties like flexibility or hardness.
• Aluminum: Lighter than steel, aluminum tools are used for delicate work and preventing damage to the panel.
• Plastic/Nylon: Used for tap-down tools, sliders, and protective tips to avoid scratching or marring the paint surface.
• Rubber: Used for glue pulling systems, providing a secure bond and controlled pulling force.

Purpose:

The primary purpose of a car foil tool is to efficiently and cost-effectively repair dents in vehicle body panels, maintaining the original factory paint finish whenever possible. This contrasts with traditional dent repair methods which often involve filling, sanding, and repainting.

Function:

Car foil tools function by applying controlled pressure and leverage to the underside of the dented panel. The tools are inserted into access points (e.g., door panels, window seals, existing holes) and used to gradually massage the metal back into its original form. Different tool shapes and sizes are used to address varying dent sizes, locations, and complexities.

Usage Scenarios:

• Hail Damage: Repairing multiple small to medium-sized dents caused by hail.
• Door Dings & Small Impacts: Addressing minor dents from collisions with objects in parking lots or during everyday use.
• Minor Collision Damage: Repairing dents without damaging the paint, avoiding the need for full panel replacement or repainting.
• Factory Imperfections: Correcting small dents or imperfections that may have occurred during the manufacturing process.

Common Types:

• Rods & Levers: These are the primary tools for pushing dents from the underside of the panel. They come in various lengths, shapes (e.g., flat, curved, hooked), and tip profiles for different dent types.
• Tap-Down Tools: Used to gently tap the high spots around the dent to level the panel before pushing the dent out.
• Sliders: Used to manipulate rods and levers in tight spaces, providing a more controlled pushing action.
• Glue Pulling Systems: Involve applying specialized glue to dented areas and using a pulling device (e.g., slide hammer, mini lifter) to pull the dent out. These are often used for larger or more complex dents.
• PNT (Paintless Dent Repair) Bridges: Used to support the panel while pushing from the underside, preventing further damage.
• Light Boards: Used to visually inspect the panel for imperfections and monitor the repair progress.
• Reflectors: Similar to light boards, used to highlight imperfections in the paint surface.

Based on the provided information, “car foil tool” can be interpreted as a tool used for applying foil to cars, potentially involving adhesive materials. Here's a breakdown of relevant HS codes:

• 8205513030: This code covers handtools (including glass cutters) and parts thereof, specifically household tools of iron or steel, kitchen and table implements. While not a direct match, if the tool is a simple hand application tool, this could apply.

  • 82: Chapter 82 – Tools, implements, cutlery, hand tools, and articles thereof.
  • 05: Heading 8205 – Handtools (including glass cutters) and parts thereof.
  • 51: Subheading 8205.51 – Other handtools (including glass cutters) and parts thereof.
  • 30: Further specification – Household tools, and parts thereof: Of iron or steel: Kitchen and table implements.
  • Tax Details: Base tariff: 3.7%, Additional tariff: 25.0%, Post April 2, 2025, additional tariff: 30.0%. Total tariff: 58.7%.

• 3919101010: This code covers self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, specifically in rolls of a width not exceeding 20 cm, having a light-reflecting surface produced in whole or in part by glass grains (ballotini). If the “foil” component is a self-adhesive plastic film used for car wrapping, this could be relevant.

  • 39: Chapter 39 – Plastics and articles thereof.
  • 19: Heading 3919 – Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics.
  • 10: Subheading 3919.10 – In rolls of a width not exceeding 20 cm.
  • 10: Further specification – Having a light-reflecting surface produced in whole or in part by glass grains (ballotini) Pavement marking tape.
  • Tax Details: Base tariff: 6.5%, Additional tariff: 25.0%, Post April 2, 2025, additional tariff: 30.0%. Total tariff: 61.5%.

• 3919905060: This code covers self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, specifically “Other”. If the “foil” component is a self-adhesive plastic film used for car wrapping, this could be relevant.

  • 39: Chapter 39 – Plastics and articles thereof.
  • 19: Heading 3919 – Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics.
  • 90: Subheading 3919.90 – Other.
  • 50: Further specification – Other.
  • Tax Details: Base tariff: 5.8%, Additional tariff: 25.0%, Post April 2, 2025, additional tariff: 30.0%. Total tariff: 60.8%.

According to the provided reference material, the HS code options related to 'car foil tool' are limited, with only the following 3 found.