| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 4411139010 | Doc | 58.9% | CN | US | 2025-05-12 |
| 4411939090 | Doc | 58.9% | CN | US | 2025-05-12 |
| 4409295100 | Doc | 55.0% | CN | US | 2025-05-12 |
Product Name: Crown Molding
Classification: Wood-based products (wood fiberboard, molded wood, etc.)
🔍 HS Code Classification and Tax Details
1. HS Code: 4411139010
Description: Medium-density fiberboard (MDF), thickness 5–9 mm, standard wood molding
- Base Tariff Rate: 3.9%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 58.9%
- Notes:
- This code applies to MDF used for standard wood molding.
- Ensure the product is not classified under other HS codes (e.g., 4409 for molded wood).
- Verify the thickness and material composition to avoid misclassification.
2. HS Code: 4411939090
Description: Other wood fiberboard with density between 0.5 g/cm³ and 0.8 g/cm³
- Base Tariff Rate: 3.9%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 58.9%
- Notes:
- This code is for other types of wood fiberboard not covered by 4411139010.
- Confirm the density and material to ensure correct classification.
- This may include products like particle board or other engineered wood products.
3. HS Code: 4409295100
Description: Non-coniferous wood processed by continuous molding for wood molding
- Base Tariff Rate: 0.0%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 55.0%
- Notes:
- This code applies to molded wood products made from non-coniferous (softwood) wood.
- Ensure the processing method (continuous molding) is documented.
- This is a lower tax rate compared to the MDF codes, but still subject to the April 11, 2025 special tariff.
⚠️ Important Alerts and Recommendations
- April 11, 2025 Special Tariff:
- All three HS codes are subject to an additional 30.0% tariff after April 11, 2025.
-
This is a time-sensitive policy—ensure your customs clearance is completed before this date if possible.
-
Anti-Dumping Duties:
- If the product contains iron or aluminum components, check for anti-dumping duties applicable to those materials.
-
These are not included in the above tax rates and must be assessed separately.
-
Certifications and Documentation:
- Verify the material composition (e.g., MDF vs. molded wood) and thickness for accurate classification.
- Confirm if certifications (e.g., FSC, CARB) are required for import.
- Maintain product specifications and invoices to support customs declarations.
✅ Proactive Advice
- Double-check the HS code based on the material type, density, and processing method.
- Consult a customs broker or HS code expert if the product is a hybrid or composite material.
- Monitor policy updates after April 11, 2025, as the special tariff may change or be extended.
- Keep records of product samples, specifications, and supplier documentation for audit purposes.
Product Name: Crown Molding
Classification: Wood-based products (wood fiberboard, molded wood, etc.)
🔍 HS Code Classification and Tax Details
1. HS Code: 4411139010
Description: Medium-density fiberboard (MDF), thickness 5–9 mm, standard wood molding
- Base Tariff Rate: 3.9%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 58.9%
- Notes:
- This code applies to MDF used for standard wood molding.
- Ensure the product is not classified under other HS codes (e.g., 4409 for molded wood).
- Verify the thickness and material composition to avoid misclassification.
2. HS Code: 4411939090
Description: Other wood fiberboard with density between 0.5 g/cm³ and 0.8 g/cm³
- Base Tariff Rate: 3.9%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 58.9%
- Notes:
- This code is for other types of wood fiberboard not covered by 4411139010.
- Confirm the density and material to ensure correct classification.
- This may include products like particle board or other engineered wood products.
3. HS Code: 4409295100
Description: Non-coniferous wood processed by continuous molding for wood molding
- Base Tariff Rate: 0.0%
- Additional Tariff (General): 25.0%
- Special Tariff (After April 11, 2025): 30.0%
- Total Tax Rate: 55.0%
- Notes:
- This code applies to molded wood products made from non-coniferous (softwood) wood.
- Ensure the processing method (continuous molding) is documented.
- This is a lower tax rate compared to the MDF codes, but still subject to the April 11, 2025 special tariff.
⚠️ Important Alerts and Recommendations
- April 11, 2025 Special Tariff:
- All three HS codes are subject to an additional 30.0% tariff after April 11, 2025.
-
This is a time-sensitive policy—ensure your customs clearance is completed before this date if possible.
-
Anti-Dumping Duties:
- If the product contains iron or aluminum components, check for anti-dumping duties applicable to those materials.
-
These are not included in the above tax rates and must be assessed separately.
-
Certifications and Documentation:
- Verify the material composition (e.g., MDF vs. molded wood) and thickness for accurate classification.
- Confirm if certifications (e.g., FSC, CARB) are required for import.
- Maintain product specifications and invoices to support customs declarations.
✅ Proactive Advice
- Double-check the HS code based on the material type, density, and processing method.
- Consult a customs broker or HS code expert if the product is a hybrid or composite material.
- Monitor policy updates after April 11, 2025, as the special tariff may change or be extended.
- Keep records of product samples, specifications, and supplier documentation for audit purposes.