Found 5 matching results
(CN → US)
| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 8467290035 | Doc | 37.5% | CN | US | 2025-05-12 |
| 6804226000 | Doc | 55.0% | CN | US | 2025-05-12 |
| 8208200090 | Doc | 55.0% | CN | US | 2025-05-12 |
| 8202390040 | Doc | 55.0% | CN | US | 2025-05-12 |
| 7105100011 | Doc | 55.0% | CN | US | 2025-05-12 |
Here is the structured breakdown of the HS codes and associated tariffs for the cutting discs you've declared, with a focus on clarity and actionable compliance guidance:
🔍 HS CODE: 8467290035 – Stone Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 7.5%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 37.5%
- Notes:
- This is the lowest tax rate among the listed products.
- Be aware of the April 11, 2025 deadline for the special tariff.
- Confirm the material composition of the cutting disc to ensure correct classification.
🔍 HS CODE: 6804226000 – Ceramic Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- High tax burden due to the 25% additional tariff and 30% special tariff.
- Ensure the product is not misclassified as a stone or diamond disc.
- Verify certifications (e.g., safety, material compliance) if exporting to regulated markets.
🔍 HS CODE: 8208200090 – Woodworking Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- Similar to ceramic cutting discs in terms of tax burden.
- Confirm the intended use (e.g., industrial vs. DIY) to avoid misclassification.
- Check if anti-dumping duties apply if the product is imported from certain countries.
🔍 HS CODE: 8202390040 – Diamond Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- High tax rate due to additional and special tariffs.
- Be cautious of anti-dumping duties on diamond products, especially from countries with known trade disputes.
- Confirm material origin and certifications (e.g., diamond content, safety standards).
🔍 HS CODE: 7105100011 – Diamond Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- This code is also for diamond cutting discs, but may differ in material or design from 8202390040.
- Ensure product specifications match the HS code description.
- Watch out for anti-dumping duties and special tariffs post-April 11, 2025.
📌 Proactive Compliance Advice:
- Verify Material and Unit Price: Ensure the product is correctly classified based on material (e.g., diamond, ceramic, stone) and intended use.
- Check Certifications: Some cutting discs may require safety certifications (e.g., CE, ANSI) for import.
- Monitor Tariff Changes: The April 11, 2025 deadline is critical for the special tariff.
- Consult Customs Broker: For high-value or complex products, seek professional help to avoid delays or penalties.
Let me know if you need help with certification requirements or tariff calculation tools. Here is the structured breakdown of the HS codes and associated tariffs for the cutting discs you've declared, with a focus on clarity and actionable compliance guidance:
🔍 HS CODE: 8467290035 – Stone Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 7.5%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 37.5%
- Notes:
- This is the lowest tax rate among the listed products.
- Be aware of the April 11, 2025 deadline for the special tariff.
- Confirm the material composition of the cutting disc to ensure correct classification.
🔍 HS CODE: 6804226000 – Ceramic Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- High tax burden due to the 25% additional tariff and 30% special tariff.
- Ensure the product is not misclassified as a stone or diamond disc.
- Verify certifications (e.g., safety, material compliance) if exporting to regulated markets.
🔍 HS CODE: 8208200090 – Woodworking Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- Similar to ceramic cutting discs in terms of tax burden.
- Confirm the intended use (e.g., industrial vs. DIY) to avoid misclassification.
- Check if anti-dumping duties apply if the product is imported from certain countries.
🔍 HS CODE: 8202390040 – Diamond Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- High tax rate due to additional and special tariffs.
- Be cautious of anti-dumping duties on diamond products, especially from countries with known trade disputes.
- Confirm material origin and certifications (e.g., diamond content, safety standards).
🔍 HS CODE: 7105100011 – Diamond Cutting Discs
- Base Tariff Rate: 0.0%
- Additional Tariff: 25.0%
- Special Tariff after April 11, 2025: 30.0%
- Total Tax Rate: 55.0%
- Notes:
- This code is also for diamond cutting discs, but may differ in material or design from 8202390040.
- Ensure product specifications match the HS code description.
- Watch out for anti-dumping duties and special tariffs post-April 11, 2025.
📌 Proactive Compliance Advice:
- Verify Material and Unit Price: Ensure the product is correctly classified based on material (e.g., diamond, ceramic, stone) and intended use.
- Check Certifications: Some cutting discs may require safety certifications (e.g., CE, ANSI) for import.
- Monitor Tariff Changes: The April 11, 2025 deadline is critical for the special tariff.
- Consult Customs Broker: For high-value or complex products, seek professional help to avoid delays or penalties.
Let me know if you need help with certification requirements or tariff calculation tools.