Find HS Code and trade information for laser film

Here's a classification of "laser film" based on the provided data, aiming for 5-10 relevant HS codes. Please note that accurate classification heavily depends on the precise composition and application of the film.

• 3919.10.20.55: Plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls: This is a broad category for plastic film. The first two digits, 39, indicate plastics and rubber articles. The next two, 19, specify plastic plates, sheets, film, foil, etc. 10 further specifies self-adhesive products. 20 denotes rolls of a width not exceeding 20cm, and 55 is 'other'. If the laser film is self-adhesive plastic film in rolls ≤ 20cm wide, this is a strong possibility. Total tax rate: 60.8%.

• 3919.90.50.60: Plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls: This is a broader category within plastics film, covering those not specifically self-adhesive. If the laser film is plastic-based and not self-adhesive, this HS code is likely. 3919 signifies plastic plates, sheets, film, etc., while 90 indicates 'other'. 50 is for 'other', and 60 is 'other'. Total tax rate: 60.8%.

• 3921.90.40.10: Other plates, sheets, film, foil and strip, of plastics: This applies to plastic plates, sheets, film, etc. that are flexible and reinforced with paper. If the laser film incorporates paper reinforcement, this is relevant. 39 indicates plastics, 21 refers to plates, sheets, film, etc., 90 denotes 'other', 40 refers to flexible paper reinforced products and 10 signifies 'other'. Total tax rate: 34.2%.

• 3921.90.50.10: Other plates, sheets, film, foil and strip, of plastics: This applies to plastic plates, sheets, film, etc. that are high pressure paper reinforced decorative laminates. If the laser film is a decorative laminate with paper reinforcement, this HS code should be considered. 39 indicates plastics, 21 refers to plates, sheets, film, etc., 90 denotes 'other', 50 refers to high pressure paper reinforced decorative laminates and 10 signifies 'other'. Total tax rate: 34.8%.

• 8523.41.00.00: Discs, tapes, solid-state non-volatile storage devices, "smart cards" and other media for the recording of sound or of other phenomena, whether or not recorded: If the laser film is used for data recording (e.g., optical discs), this is applicable. 85 denotes electrical machinery, 23 refers to recording media, and 41 specifies optical media, 00 indicates unrecorded. Total tax rate: 37.5%.

• 8523.80.20.00: Discs, tapes, solid-state non-volatile storage devices, "smart cards" and other media for the recording of sound or of other phenomena: A broader category for recording media if the film isn’t specifically optical. 85 denotes electrical machinery, 23 refers to recording media, 80 denotes 'other' and 20 signifies 'other'. Total tax rate: 37.5%.

Important Considerations & Recommendations:

• Material Composition: The precise polymer type (e.g., PET, PVC, PP) is crucial.
• Adhesive Presence: Is the film self-adhesive? If so, confirm the adhesive type.
• Reinforcement: If paper-reinforced, the type of paper and reinforcement method matter.
• Application: What is the intended use of the laser film? (e.g. data storage, decoration, packaging).
• Tax Rate Changes: Be aware of the 2025.04.02 tax rate changes.

Disclaimer: This is a preliminary classification based on limited information. It is strongly recommended to consult with a qualified customs broker or relevant authority for a definitive HS code determination.