Find HS Code and trade information for plastic support

Plastic Support

Plastic supports are structural components used to hold, brace, or reinforce objects or systems. They are widely employed across diverse applications due to their versatility, cost-effectiveness, and ease of manufacturing.

Material

The term 'plastic support' encompasses a broad range of polymers, each offering specific properties. Common materials include:

• Polypropylene (PP): Known for its high chemical resistance, low density, and flexibility.
• Polyethylene (PE): Offers good impact resistance and is commonly used for low-stress applications. Includes Low-Density Polyethylene (LDPE) and High-Density Polyethylene (HDPE).
• Polyvinyl Chloride (PVC): Rigid and durable, often used for structural supports and conduits.
• Acrylonitrile Butadiene Styrene (ABS): Offers a balance of strength, rigidity, and impact resistance.
• Polyamide (Nylon): High strength and abrasion resistance, suitable for demanding applications.
• Polycarbonate (PC): Exceptional impact resistance and transparency.
• Acrylic (PMMA): Transparency, weather resistance, and rigidity.

The choice of plastic depends on factors such as load requirements, temperature, chemical exposure, and desired lifespan.

Purpose

Plastic supports serve a multitude of purposes, including:

• Load Bearing: Supporting the weight of objects, such as shelving components or pipes.
• Stabilization: Preventing movement or vibration of structures.
• Positioning: Maintaining the correct alignment of components.
• Protection: Shielding objects from damage or environmental factors.
• Electrical Insulation: Providing non-conductive support for electrical components.
• Containment: Holding or guiding materials, such as plants in plant supports.

Function

The function of a plastic support is determined by its design and the application. Common functional characteristics include:

• Compression Resistance: Ability to withstand forces pushing inwards.
• Tensile Strength: Ability to withstand forces pulling outwards.
• Flexural Rigidity: Resistance to bending.
• Impact Resistance: Ability to absorb energy from sudden impacts.
• Chemical Resistance: Ability to withstand exposure to corrosive substances.
• UV Resistance: Ability to withstand degradation from sunlight.

Usage Scenarios

Plastic supports are found in a wide range of industries and applications:

• Construction: Pipe supports, shelving brackets, formwork components.
• Agriculture: Plant stakes, trellises, greenhouse framing.
• Electronics: Component mounting brackets, cable management systems.
• Automotive: Interior trim supports, underbody components.
• Plumbing: Pipe hangers, valve supports.
• Furniture: Shelf supports, leg supports.
• Packaging: Dunnage for protecting goods during transit.
• Medical: Braces, splints, and other assistive devices.

Common Types

• Pipe Supports: Designed to hold and secure pipes, often with cushioning to prevent damage.
• Shelf Brackets: Support shelves in various configurations.
• Plant Stakes/Trellises: Provide support for growing plants.
• Cable Ties/Clips: Secure and organize cables and wires.
• Corner Braces: Reinforce corners of structures.
• Mounting Brackets: Secure components to walls, ceilings, or other surfaces.
• Custom Molded Supports: Designed for specific applications with unique requirements.
• Adjustable Supports: Allow for flexibility in positioning and load distribution.

Based on the provided information, “plastic support” can fall under several HS code classifications depending on its specific function and application. Here's a breakdown of relevant HS codes:

• 3926.90.10.00: This HS code covers “Other articles of plastics and articles of other materials of headings 3901 to 3914: Other: Buckets and pails”. If the plastic support is designed and used as a bucket or pail, this code applies. The total tax rate is 40.9%, comprised of a basic tariff of 3.4% and an additional tariff of 7.5%, increasing to 30.0% after April 2, 2025.
• 3926.90.99.89: This HS code covers “Other articles of plastics and articles of other materials of headings 3901 to 3914: Other: Other”. If the plastic support doesn’t fit the specific category of buckets and pails but is still classified as an article of plastics, this code is applicable. The total tax rate is 42.8%, consisting of a basic tariff of 5.3% and an additional tariff of 7.5%, rising to 30.0% after April 2, 2025.
• 3925.90.00.00: This HS code covers “Builders' ware of plastics, not elsewhere specified or included: Other”. If the plastic support is used as builders' ware and doesn't fall into other specified categories, this code applies. The total tax rate is 60.3%, with a basic tariff of 5.3% and an additional tariff of 25.0%, increasing to 30.0% after April 2, 2025.
• 3925.10.00.00: This HS code covers “Builders' ware of plastics, not elsewhere specified or included: Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 liters (If the "plastic support" functions as a container)”. If the plastic support functions as a reservoir, tank, or vat with a capacity exceeding 300 liters, this code is applicable. The total tax rate is 61.3%, consisting of a basic tariff of 6.3% and an additional tariff of 25.0%, increasing to 30.0% after April 2, 2025.

Important Note: The classification of “plastic support” depends heavily on its specific function. If it is used as a container exceeding 300 liters, HS code 3925.10.00.00 is most appropriate. Otherwise, consider HS codes 3926.90.10.00 or 3926.90.99.89 based on whether it is a bucket or pail or another type of plastic article. If it is used as builders' ware, HS code 3925.90.00.00 may be applicable.