Found 2 matching results
(CN → US)
| HS Code | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|
| 8544110020 | Doc | 58.5% | CN | US | 2025-05-12 |
| 8544110030 | Doc | 58.5% | CN | US | 2025-05-12 |
HS Code Classification for "WINDING FILM"
Based on the provided reference data, classifying "WINDING FILM" requires careful consideration of its material and specifications. Here's a breakdown of potential HS codes, assuming it falls under insulated electric conductors used for winding purposes:
1. 8544.11.00.20 – Winding wire: Of copper 33 AWG (0.18 mm in diameter) and finer
- 85: Electrical machinery and equipment and parts thereof; Electric circuits. This broad category covers electrical conductors.
- 44: Insulated conductors. Specifically focuses on wires and cables with insulation.
- 11: Insulated wire, cable (including coaxial cable) and other insulated electric conductors.
- 00: Further specifies winding wire.
- 20: Specifically for copper winding wire with a diameter of 33 AWG (0.18 mm) or finer.
- Applicability: If the winding film is made of copper and has a diameter of 33 AWG or smaller, this is the correct HS code.
- Tax Rate: Base Tariff: 3.5%, Additional Tariff: 25.0%, Post 2025.4.2 Additional Tariff: 30%. Total: 58.5%
2. 8544.11.00.30 – Winding wire: Of copper 22 AWG (0.643 mm in diameter) and finer but larger than 33 AWG (0.18 mm in diameter)
- 85: Electrical machinery and equipment and parts thereof; Electric circuits.
- 44: Insulated conductors.
- 11: Insulated wire, cable (including coaxial cable) and other insulated electric conductors.
- 00: Further specifies winding wire.
- 30: Specifically for copper winding wire with a diameter between 33 AWG (0.18 mm) and 22 AWG (0.643 mm).
- Applicability: If the winding film is made of copper and has a diameter larger than 33 AWG but not exceeding 22 AWG, this HS code applies.
- Tax Rate: Base Tariff: 3.5%, Additional Tariff: 25.0%, Post 2025.4.2 Additional Tariff: 30%. Total: 58.5%
Important Considerations & Recommendations:
- Material Verification: Confirm the exact material composition of the winding film. If it's not copper, a different HS code will be required.
- Diameter Measurement: Precisely measure the diameter of the winding film in AWG (American Wire Gauge) to determine the correct code.
- Insulation Type: The reference specifies "insulated." Ensure the film has appropriate insulation.
- Certification: Depending on the application of the winding film, specific certifications (e.g., UL, RoHS) might be necessary for import.
- Post-April 2, 2025 Tariffs: Be aware of the increased additional tariffs taking effect after April 2, 2025.
- Detailed Product Specification: Provide a detailed product specification sheet to customs for accurate classification.