| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 7315110010 | Chain and parts thereof, of iron or steel: --> Articulated link chain and parts thereof: --> Roller chain --> Other: --> Of not over <il>50 mm</il> pitch and containing more than 3 parts per pitch: --> Bicycle chains | Doc | 80.0% | CN | US | 2025-05-12 |
Okay, let's break down the HS Code and import details for your BICYCLE CHAIN declaration. Here's a structured explanation to help you understand the classification, taxes, and important considerations:
1. HS Code Breakdown: 7315.11.00.10
The HS Code is a globally standardized system used to classify traded products. Each segment of the code provides more specific information about the item.
- 73: This chapter covers articles of iron or steel. (Think of this as the broad category – Iron & Steel Products)
- 15: This heading specifically covers chain and parts thereof, of iron or steel. (Narrowing down to Chains)
- 11: This subheading focuses on articulated link chain and parts thereof. (Further specifying Articulated Chains)
- 00: This further defines Roller chain. (Even more specific – Roller Chains)
- 10: This is the final classification: Bicycle chains, of not over 50 mm pitch and containing more than 3 parts per pitch. (The most precise description of your product.)
In essence, this HS Code identifies your product as a bicycle chain made of iron or steel, specifically a roller chain with a pitch of 50mm or less and more than 3 parts per pitch.
2. Tax Details
- Basic Duty: 0.0% - This means there is no base import tariff.
- Additional Tariff: 25.0% - Currently, there's a 25% additional tariff applied to steel and aluminum products.
- Post-April 2025 Additional Tariff: 30% - Be aware that after April 2025, the additional tariff will increase to 30% for steel and aluminum products.
- Total Tax: 80.0% - This is the combined effect of all applicable tariffs.
3. Important Considerations & Recommendations
- Material Verification: Double-check the exact material composition of your bicycle chains. While the HS Code assumes iron or steel, any significant alloy content could potentially shift the classification.
- Pitch Measurement: Accurately measure the pitch of the chain (the distance between the centers of two adjacent pins). The HS Code specifically applies to chains not over 50mm pitch.
- Parts per Pitch: Confirm that each pitch contains more than 3 parts.
- Country of Origin: Since your item is from CN (China), be prepared for potential scrutiny regarding the origin of the steel/materials used.
- Valuation: Ensure the declared value (single price) is accurate and justifiable. Customs authorities may challenge valuations they deem too low.
- Certification (Potential): Depending on the final destination country's import regulations, you may need to provide certifications related to material composition, quality standards, or safety compliance. Check the import requirements of the destination country.
Disclaimer: I am an AI assistant and this information is for general guidance only. Import regulations are complex and subject to change. It is always best to consult with a licensed customs broker or the customs authorities of the importing country for definitive advice.
Do you have any further questions about this HS Code, or would you like me to elaborate on any of these points? For example, would you like me to help you find resources for verifying material composition or checking import regulations for a specific country?