Found 1 matching results
(CN → US)
| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 7326200020 | Other articles of iron or steel: Articles of iron or steel wire Garment hangers | Doc | 83.9% | CN | US | 2025-05-12 |
Okay, let's break down the classification and duty implications for your "PANT RACK STYLE" item, based on the HS Code provided: 7326.20.00.20.
Here's a structured analysis:
1. HS Code Breakdown (7326.20.00.20):
- 73: This chapter covers Articles of iron or steel. Essentially, anything made primarily of iron or steel falls under this umbrella.
- 7326: This heading specifically covers Articles of iron or steel wire. This narrows down the scope to items manufactured from iron or steel wire.
- 7326.20: This subheading focuses on Articles of iron or steel wire, garment hangers. This is where your "PANT RACK STYLE" item is classified, as it's a hanger made of iron or steel wire.
- 7326.20.00.20: This is the most specific code, providing further detail. The final digits often relate to specific materials or features, but in this case, it's a more granular classification within garment hangers.
2. Duty Implications (Based on your provided tax details):
- Basic Duty: 3.9% - This is the standard tariff applied to the item.
- Additional Duty (Currently): 25.0% - This is an extra tariff being applied.
- Additional Duty (Post April 2025): 30% - Important! This indicates a change in tariff rates after April 2025. The additional duty will increase to 30% at that time.
- Total Duty (Currently): 83.9% - This is the combined rate of the basic duty and the additional duty.
3. Important Considerations & Recommendations:
- Material Verification: While the HS Code suggests iron or steel wire, double-check the exact composition of your "PANT RACK STYLE" item. If it contains significant amounts of other materials (e.g., plastic coatings, wood components), the HS Code might need to be revised. This is crucial for accurate duty calculation.
- Pricing Accuracy: Ensure the declared value (single price) is accurate. Customs authorities may challenge valuations they deem unrealistic.
- Country of Origin: You've indicated "CN" (China) as the country of origin. Confirm this is correct, as the origin impacts duty rates and potential trade agreements.
- Steel/Aluminum Addtional Duty: Pay close attention to the note about a 25% additional duty on steel and aluminum products. This could apply to your item depending on the specific alloy used.
- Certification/Compliance: Depending on the destination country, you may need to provide certifications related to product safety, quality, or environmental standards. Check the import regulations of the destination country to determine if any specific certifications are required.
- Post-April 2025 Planning: Factor the increased 30% additional duty into your cost calculations for shipments after April 2025.
Disclaimer: I am an AI assistant and this information is for general guidance only. Customs regulations are complex and subject to change. It is highly recommended to consult with a licensed customs broker or import specialist for definitive advice tailored to your specific situation and destination country.