Found 17 matching results
(CN → US)
| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 7304110020 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Line pipe of a kind used for oil or gas pipelines: Of stainless steel Having an outside diameter not exceeding <il>114.3 mm</il> | Doc | 30.0% | CN | US | 2025-05-12 |
| 7304246075 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: Other, of stainless steel: Tubing Having an outside diameter exceeding <il>406.4 mm</il> | Doc | 30.0% | CN | US | 2025-05-12 |
| 7304390020 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Other, of circular cross section, of iron or nonalloy steel: Other Other: Other: Having an outside diameter less than <il>38.1 mm</il> | Doc | 30.0% | CN | US | 2025-05-12 |
| 7304413015 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Other, of circular cross section, of stainless steel: Cold-drawn or cold-rolled (cold-reduced): Of an external diameter of less than <il>19 mm</il> Other: Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters | Doc | 37.5% | CN | US | 2025-05-12 |
| 7304598065 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: Other, of circular cross section, of other alloy steel: Other: Other: Other: Other Having an outside diameter exceeding <il>285.8 mm</il> but not exceeding <il>406.4 mm</il>: Having a wall thickness of <il>12.7 mm</il> or more but less than <il>19 mm</il> | Doc | 30.0% | CN | US | 2025-05-12 |
| 7305191030 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds <il>406.4 mm</il>, of iron or steel: Line pipe of a kind used for oil or gas pipelines: Other: Of iron or nonalloy steel With an external diameter exceeding <il>406.4 mm</il> but not exceeding <il>609.6 mm</il> | Doc | 30.0% | CN | US | 2025-05-12 |
| 7306305031 | Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: Other, welded, of circular cross section, of iron or nonalloy steel: Having a wall thickness of <il>1.65 mm</il> or more: Other Other: With an outside diameter not exceeding <il>114.3 mm</il>: Galvanized: Other: With an outside diameter not exceeding 50.8 mm | Doc | 30.0% | CN | US | 2025-05-12 |
| 7306305057 | Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: Other, welded, of circular cross section, of iron or nonalloy steel: Having a wall thickness of <il>1.65 mm</il> or more: Other Other: With an outside diameter not exceeding <il>114.3 mm</il>: Other: Other: With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm | Doc | 30.0% | CN | US | 2025-05-12 |
| 7306901000 | Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: Other: Of iron or nonalloy steel | Doc | 30.0% | CN | US | 2025-05-12 |
| 3917210000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of ethylene | Doc | 58.1% | CN | US | 2025-05-12 |
| 3917220000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of propylene | Doc | 58.1% | CN | US | 2025-05-12 |
| 3917230000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of vinyl chloride | Doc | 58.1% | CN | US | 2025-05-12 |
| 7411101030 | Copper tubes and pipes: Of refined copper: Seamless Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools | Doc | 56.5% | CN | US | 2025-05-12 |
| 7411101090 | Copper tubes and pipes: Of refined copper: Seamless Other | Doc | 56.5% | CN | US | 2025-05-12 |
| 7608100090 | Aluminum tubes and pipes: Of aluminum, not alloyed Other | Doc | 35.7% | CN | US | 2025-05-12 |
| 7608200090 | Aluminum tubes and pipes: Of aluminum alloys Other | Doc | 35.7% | CN | US | 2025-05-12 |
| 6810910000 | Articles of cement, of concrete or of artificial stone, whether or not reinforced: Other articles: Prefabricated structural components for building or civil engineering | Doc | 55.0% | CN | US | 2025-05-12 |
Okay, let's break down the HS codes you've provided for "PIPE" and their corresponding tariff implications. I'll structure this to be as clear and helpful as possible.
General Notes:
- HS Code Structure: The first 6 digits define the product category. The more digits you have, the more specific the classification.
- Tariff Changes: You'll notice a recurring theme of tariffs increasing to 30% after April 2, 2025. This is important for planning import timing.
- Material is Key: The tariff rate is highly dependent on the material of the pipe (steel, iron, plastic, copper, aluminum).
- Outside Diameter & Wall Thickness: These dimensions are frequently used to differentiate between tariff rates within a category.
Here's a breakdown of each HS code, categorized for clarity:
I. Iron or Steel Pipes (Chapters 73 & 76)
These codes cover a wide range of seamless and welded iron/steel pipes.
- 7304.11.00.20: Tubes, pipes and hollow profiles, seamless, of iron or steel: Line pipe of a kind used for oil or gas pipelines: Of stainless steel, OD ≤ 114.3mm. Tax: 30% (post April 2, 2025). This is specifically for stainless steel line pipe used in the oil/gas industry.
- 7304.24.60.75: Tubes, pipes and hollow profiles, seamless, of iron or steel: Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: Other, of stainless steel: Tubing, OD > 406.4mm. Tax: 30% (post April 2, 2025). Similar to above, but for casing/tubing used in drilling, and larger diameter.
- 7304.39.00.20: Tubes, pipes and hollow profiles, seamless, of iron or steel: Other, of circular cross section, of iron or nonalloy steel: Other, OD < 38.1mm. Tax: 30% (post April 2, 2025). This is a broader category for non-alloy steel pipes, smaller diameter.
- 7304.41.30.15: Tubes, pipes and hollow profiles, seamless, of iron or steel: Other, of circular cross section, of stainless steel: Cold-drawn or cold-rolled: OD < 19mm, suitable for boilers, superheaters, etc.. Tax: 37.5%. This has a higher tariff due to the specific manufacturing process (cold-drawn/rolled) and intended use.
- 7304.59.80.65: Tubes, pipes and hollow profiles, seamless, of iron or steel: Other, of circular cross section, of other alloy steel: Other, OD > 285.8mm but ≤ 406.4mm, wall thickness ≥ 12.7mm but < 19mm. Tax: 30% (post April 2, 2025). This is for alloy steel pipes with specific dimensions.
- 7305.19.10.30: Other tubes and pipes (welded, riveted, etc.), OD > 406.4mm, of iron or steel: Line pipe of a kind used for oil or gas pipelines: Other, of iron or nonalloy steel, OD > 406.4mm but ≤ 609.6mm. Tax: 30% (post April 2, 2025). This is for larger diameter welded line pipe.
- 7306.30.50.31 & 7306.30.50.57: Other tubes, pipes and hollow profiles (welded, etc.), of iron or steel: Welded, circular cross section, of iron or nonalloy steel, wall thickness ≥ 1.65mm, OD ≤ 114.3mm, galvanized. Tax: 30% (post April 2, 2025). These codes are for galvanized welded pipes with specific dimensions.
- 7306.90.10.00: Other tubes, pipes and hollow profiles (welded, etc.), of iron or steel: Other, of iron or nonalloy steel. Tax: 30% (post April 2, 2025). A catch-all for iron/steel pipes not specifically classified elsewhere.
II. Plastic Pipes (Chapter 39)
- 3917.21.00.00, 3917.22.00.00, 3917.23.00.00: Tubes, pipes and hoses and fittings therefor, of plastics: Tubes, pipes and hoses, rigid: Of polymers of ethylene, propylene, vinyl chloride. Tax: 58.1%. These have a significantly higher tariff rate (over 50%) due to the plastic material.
III. Copper & Aluminum Pipes (Chapters 74 & 76)
- 7411.10.10.30 & 7411.10.10.90: Copper tubes and pipes: Of refined copper: Seamless, OD ≥ 6mm but ≤ 16mm, in coils on spools / Other. Tax: 56.5%. These have a high tariff rate due to the copper material.
- 7608.10.00.90 & 7608.20.00.90: Aluminum tubes and pipes: Of aluminum, not alloyed / Of aluminum alloys. Tax: 35.7%. These have a moderate tariff rate due to the aluminum material.
IV. Cement/Concrete Pipes (Chapter 68)
- 6810.91.00.00: Articles of cement, of concrete or of artificial stone, whether or not reinforced: Other articles: Prefabricated structural components for building or civil engineering. Tax: 55.0%. These have a high tariff rate due to the material and intended use.
Recommendations & Key Considerations:
- Material Verification: Double-check the exact material composition of your pipes. This is the most important factor in determining the correct HS code and tariff rate.
- Dimensions: Accurately measure the outside diameter and wall thickness. Small differences in dimensions can lead to different tariff rates.
- Intended Use: Confirm the intended use of the pipes. Some codes have specific requirements for applications (e.g., oil/gas line pipe).
- Certifications: Depending on the application, you may need specific certifications (e.g., API for oil/gas pipes).
- April 2, 2025: Be aware of the tariff changes coming into effect on April 2, 2025. Consider adjusting import schedules accordingly.
- Consult a Customs Broker: For complex classifications or high-value shipments, it's always best to consult with a qualified customs broker. They can provide expert guidance and ensure compliance with all regulations.
I hope this detailed breakdown is helpful! Let me know if you have any other questions.