| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 8207403000 | Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof: --> Tools for tapping or threading, and parts thereof: --> With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium | Doc | 60.7% | CN | US | 2025-05-12 |
Okay, let's break down the classification and potential import considerations for your declared "SCREW" items. Here's a detailed analysis based on the HS codes provided:
Item 1: Interchangeable Tools for Handtools (HS Code: 8207.40.30.00)
-
HS Code Breakdown:
- 82: Tools, implements, cutlery, hand tools, articles of prefabrication, of iron or steel. This chapter broadly covers hand tools and related items.
- 07: Interchangeable tools for handtools, whether or not power operated, or for machine-tools. This narrows it down to tools designed to be swapped in and out of hand tools or machines.
- 40: Tools for tapping or threading, and parts thereof. Specifically focuses on tools used for creating screw threads.
- 30: With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium. This indicates the tools are made of alloy steel (containing specific metals for hardness and durability).
-
What this means: This HS code is for specialized tapping or threading tools made from alloy steel. These are likely higher-precision tools used in manufacturing or specialized repair work.
-
Tax Implications:
- Base Tariff: 5.7%
- Additional Tariff: 25.0% (currently)
- Post-April 2025 Tariff: 30.0% (additional tariff will increase)
- Total Tariff: 60.7%
-
Important Considerations:
- Material Composition: Verify the exact percentage of Chromium, Molybdenum, Vanadium, or Tungsten in the cutting part. If these percentages are below the thresholds (0.2% for Cr, Mo, W; 0.1% for V), the HS code could be different, potentially affecting the tariff rate.
- End Use: Confirm the intended use of these tools. This can help ensure the correct classification.
Item 2: Screws, Bolts, Nuts, etc. (HS Code: 7318.15.80.19)
-
HS Code Breakdown:
- 73: Articles of iron or steel. This is a broad category for iron and steel products.
- 18: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, etc. This narrows it down to fasteners.
- 15: Threaded articles. Specifically focuses on screws and bolts with threads.
- 80: Other screws and bolts, whether or not with their nuts or washers. This indicates these are standard screws and bolts, not specialized types.
- 19: Other: Having shanks or threads with a diameter of
6 mm or more. This specifies a minimum diameter for the screws/bolts.
-
What this means: This HS code is for standard iron or steel screws and bolts with a diameter of 6mm or greater.
-
Tax Implications:
- Tax Information Retrieval Failed: The system was unable to retrieve tax information for this HS code. This is unusual.
-
Important Considerations:
- Diameter Verification: Confirm the diameter of the screws/bolts. If the diameter is less than 6mm, a different HS code will apply.
- Material Composition: Confirm the material composition. Stainless steel screws, for example, may have a different HS code.
- Coating/Finish: Note any coatings or finishes (e.g., zinc plating). This can affect classification.
- Urgent Tax Information Check: You MUST verify the tax rate for HS code 7318.15.80.19 with a customs broker or the relevant customs authority. The "Failed to retrieve tax information" error needs to be resolved before import.
- Certification: Depending on the end use, you may need to provide certifications (e.g., material certificates, quality control reports).
Recommendations:
- Double-Check Specifications: Carefully review the specifications of both types of screws (material, diameter, coating, intended use).
- Tax Rate Verification (HS 7318.15.80.19): This is critical. Do not proceed with import until you have confirmed the applicable tariff rate.
- Consider a Customs Broker: Engaging a customs broker can help ensure accurate classification, tariff calculation, and smooth clearance.
- Documentation: Gather all relevant documentation (invoices, packing lists, material certificates, etc.).
Disclaimer: I am an AI assistant and cannot provide definitive customs advice. This information is for general guidance only. Always consult with a qualified customs broker or the relevant customs authority for specific import requirements.