| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 3910000000 | Silicones in primary forms | Doc | 58.0% | CN | US | 2025-05-12 |
| 3910000000 | Silicones in primary forms | Doc | 58.0% | CN | US | 2025-05-12 |
| 3917320050 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Other tubes, pipes and hoses: Other, not reinforced or otherwise combined with other materials, without fittings Other | Doc | 58.1% | CN | US | 2025-05-12 |
| 4009110000 | Tubes, pipes and hoses, of vulcanized rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges): Not reinforced or otherwise combined with other materials: Without fittings | Doc | 57.5% | CN | US | 2025-05-12 |
| 8419909580 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, nonelectric; parts thereof: Parts: Other: Other Other | Doc | 59.0% | CN | US | 2025-05-12 |
| 8477800100 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof: Other machinery | Doc | 58.1% | CN | US | 2025-05-12 |
Okay, let's break down the HS codes you've provided for "SILICONE TUBE" and discuss the implications for customs clearance. Here's a structured analysis, aiming for clarity and actionable advice:
Understanding HS Codes: A Quick Primer
HS codes (Harmonized System codes) are internationally standardized codes used to classify traded products. The first 6 digits are generally consistent worldwide, while countries can add further digits for more specific categorization. Here's what the digits typically mean:
- Chapter (First 2 digits): Broad category of the product.
- Heading (Next 2 digits): More specific grouping within the chapter.
- Subheading (Next 2 digits): Even more detailed classification.
- Further digits: Country-specific refinements.
Analysis of Your HS Codes
Let's go through each code you've listed:
-
3910.00.00.00 – Silicones in primary forms
- Chapter 39: Plastics and articles thereof.
- Heading 3910: Silicones in primary forms. This suggests the tube is being imported as a raw material or basic form, not a finished product.
- Tax: 3.0% base tariff + 25% additional tariff (currently) increasing to 30% after April 2, 2025 = 58.0% total.
- Important Note: If the silicone tube has undergone any processing (e.g., cutting to specific lengths, adding fittings), it might fall under a different, more specific HS code.
-
3910.00.00.00 – Silicones in primary forms (Duplicate)
- Same as above. Having duplicates suggests you might need to clarify with your supplier the exact nature of the product to ensure the correct code is used.
-
3917.32.00.50 – Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Other tubes, pipes and hoses: Other, not reinforced or otherwise combined with other materials, without fittings
- Chapter 39: Plastics and articles thereof.
- Heading 3917: Tubes, pipes and hoses and fittings of plastics.
- Subheading 3917.32: Specifically for tubes, pipes, and hoses not reinforced and without fittings.
- Tax: 3.1% base tariff + 25% additional tariff (currently) increasing to 30% after April 2, 2025 = 58.1% total.
- Important Note: If the tube is reinforced (e.g., with a wire mesh) or has fittings attached, this code is incorrect.
-
4009.11.00.00 – Tubes, pipes and hoses, of vulcanized rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges): Not reinforced or otherwise combined with other materials: Without fittings
- Chapter 40: Rubber and articles thereof.
- Heading 4009: Tubes, pipes and hoses of vulcanized rubber.
- Subheading 4009.11: Specifically for tubes, pipes, and hoses not reinforced and without fittings.
- Tax: 2.5% base tariff + 25% additional tariff (currently) increasing to 30% after April 2, 2025 = 57.5% total.
- Important Note: This code applies only if the tube is made of vulcanized rubber. Silicone rubber and natural rubber are different.
-
8419.90.95.80 – Machinery, plant or laboratory equipment… for the treatment of materials…: Parts: Other: Other
- Chapter 84: Nuclear reactors, boilers, machinery and mechanical appliances.
- Heading 8419: Machinery for the treatment of materials.
- Subheading 8419.90: Parts of machinery for the treatment of materials.
- Tax: 4.0% base tariff + 25% additional tariff (currently) increasing to 30% after April 2, 2025 = 59.0% total.
- Important Note: This code is for parts of machinery. It's unlikely to apply to the tube itself unless it's a component of a larger machine.
-
8477.80.01.00 – Machinery for working rubber or plastics…: Other machinery
- Chapter 84: Nuclear reactors, boilers, machinery and mechanical appliances.
- Heading 8477: Machinery for working rubber or plastics.
- Subheading 8477.80: Other machinery for working rubber or plastics.
- Tax: 3.1% base tariff + 25% additional tariff (currently) increasing to 30% after April 2, 2025 = 58.1% total.
- Important Note: This code is for machinery used to make rubber or plastic products. It's unlikely to apply to the tube itself.
Recommendations & Key Action Items:
- Material Confirmation: Crucially, confirm the exact material composition of the tube. Is it silicone rubber, natural rubber, or another type of plastic? This will determine whether codes 3910 or 4009 are correct.
- Reinforcement Check: Is the tube reinforced with any materials (e.g., wire mesh, fabric)? If so, codes 3917.32 and 4009.11 are likely incorrect.
- Fittings: Does the tube have any fittings attached (e.g., connectors, flanges)? If so, codes 3917.32 and 4009.11 are likely incorrect.
- Intended Use: What is the tube used for? This can help narrow down the correct code.
- Supplier Documentation: Request a detailed product specification sheet from your supplier, including the material composition, reinforcement details, and intended use.
- Consider a Binding Ruling: For certainty, you can request a binding ruling from the customs authorities in your country. This will provide a definitive classification for your specific product.
- Tariff Changes: Be aware of the upcoming tariff changes on April 2, 2025. Factor the potential increase in tariffs into your cost calculations.
Disclaimer: I am an AI assistant and cannot provide definitive customs classification advice. This information is for general guidance only. You should consult with a qualified customs broker or the customs authorities in your country for specific advice.