Found 15 matching results
(CN → US)
| HS Code | Product Description | Official Doc | Tariff Rate | Origin | Destination | Effective Date |
|---|---|---|---|---|---|---|
| 7309000030 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding <il>300 liters</il>, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment Tanks | Doc | 80.0% | CN | US | 2025-05-12 |
| 7309000090 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding <il>300 liters</il>, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment Other | Doc | 80.0% | CN | US | 2025-05-12 |
| 7310100005 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding <il>300 liters</il>, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: Of a capacity of <il>50 liters</il> or more Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter. | Doc | 80.0% | CN | US | 2025-05-12 |
| 7310100015 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding <il>300 liters</il>, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: Of a capacity of <il>50 liters</il> or more Empty steel drums and barrels | Doc | 80.0% | CN | US | 2025-05-12 |
| 3917210000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of ethylene | Doc | 58.1% | CN | US | 2025-05-12 |
| 3917220000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of propylene | Doc | 58.1% | CN | US | 2025-05-12 |
| 3917230000 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Tubes, pipes and hoses, rigid: Of polymers of vinyl chloride | Doc | 58.1% | CN | US | 2025-05-12 |
| 3917400060 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Fittings Other plumbing fittings: Of polyvinyl chloride | Doc | 60.3% | CN | US | 2025-05-12 |
| 3917400080 | Tubes, pipes and hoses and fittings therefor (for example, joints, elbows, flanges), of plastics: Fittings Other plumbing fittings: Other | Doc | 60.3% | CN | US | 2025-05-12 |
| 3925100000 | Builders' ware of plastics, not elsewhere specified or included: Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 liters | Doc | 61.3% | CN | US | 2025-05-12 |
| 7419200010 | Other articles of copper: Cast, molded, stamped or forged, but not further worked Brass plumbing goods, not elsewhere specified or included | Doc | 55.0% | CN | US | 2025-05-12 |
| 7419805010 | Other articles of copper: Other: Other: Other Brass plumbing goods not elsewhere specified or included | Doc | 55.0% | CN | US | 2025-05-12 |
| 8413810030 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators; part thereof: Other pumps; liquid elevators: Pumps Household water systems, self-contained; and windmill pumps | Doc | 55.0% | CN | US | 2025-05-12 |
| 8481809010 | Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof: Other appliances: Other Ballcock mechanisms | Doc | 57.0% | CN | US | 2025-05-12 |
| 8509805080 | Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading 8508; parts thereof: Other appliances: Other Humidifiers: Other: Other | Doc | 34.2% | CN | US | 2025-05-12 |
Okay, let's break down the HS codes and tax implications for your "WATER SUPPLIES" declaration. I'll provide a structured analysis to help you understand the classifications and potential costs.
Understanding HS Codes: A Quick Primer
HS codes (Harmonized System codes) are internationally standardized product codes. The first two digits generally indicate the chapter (broad category), the next two digits specify the subheading, and further digits provide more specific details.
Here's a breakdown of your provided HS codes, grouped by relevant categories, with explanations and key considerations:
1. Iron or Steel Tanks & Reservoirs (Chapter 73)
- 7309.00.00.30: Reservoirs, tanks, vats exceeding 300 liters, iron or steel.
- 7309: Specifically for tanks, reservoirs, etc., of iron or steel.
- 00.00: Further specifies the product.
- 30: Indicates a specific type or material.
- Tax: 0.0% Basic Tariff, 25.0% Additional Tariff (currently), increasing to 30% after April 2, 2025. Total 80.0%.
- 7309.00.00.90: Reservoirs, tanks, vats exceeding 300 liters, iron or steel (Other).
- Similar to 7309.00.00.30, but likely covers variations not specifically captured by the '30' code.
- Tax: Same as 7309.00.00.30 - 0.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 80.0%.
2. Smaller Iron or Steel Tanks & Containers (Chapter 73)
- 7310.10.00.05: Tanks, casks, drums ≤ 300 liters, refillable stainless steel kegs.
- 7310: Covers smaller tanks, drums, etc.
- 10.00: Further specifies the product.
- 05: Specifically for refillable stainless steel kegs.
- Tax: 0.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 80.0%.
- 7310.10.00.15: Tanks, casks, drums ≤ 300 liters, empty steel drums/barrels.
- Similar to 7310.10.00.05, but for empty steel drums/barrels.
- Tax: Same as 7310.10.00.05 - 0.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 80.0%.
3. Plastic Tubes, Pipes & Fittings (Chapter 39)
- 3917.21.00.00, 3917.22.00.00, 3917.23.00.00: Tubes, pipes, rigid, of various polymers (ethylene, propylene, vinyl chloride).
- 3917: Specifically for plastic tubes, pipes, and fittings.
- 21, 22, 23: Differentiates by the type of polymer used.
- Tax: 3.1% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 58.1%.
- 3917.40.00.60, 3917.40.00.80: Plastic fittings (PVC, Other).
- 3917.40: Specifically for plastic fittings.
- 00.60, 00.80: Differentiates by the type of fitting.
- Tax: 5.3% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 60.3%.
4. Other Plastics (Chapter 39)
- 3925.10.00.00: Reservoirs, tanks, vats > 300 liters, plastic.
- 3925: Covers builders' ware of plastics.
- 10.00: Specifically for reservoirs, tanks, vats > 300 liters.
- Tax: 6.3% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 61.3%.
5. Copper Plumbing Goods (Chapter 74)
- 7419.20.00.10, 7419.80.50.10: Brass plumbing goods.
- 7419: Specifically for articles of copper.
- 20.00, 80.50: Differentiates by the type of plumbing good.
- Tax: 0.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 55.0%.
6. Pumps & Valves (Chapters 84 & 85)
- 8413.81.00.30: Household water systems, self-contained.
- 8413: Specifically for pumps for liquids.
- 81.00: Specifically for household water systems.
- Tax: 0.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 55.0%.
- 8481.80.90.10: Ballcock mechanisms.
- 8481: Specifically for taps, cocks, valves.
- 80.90: Specifically for other appliances.
- Tax: 2.0% Basic, 25.0% Additional (increasing to 30% after April 2, 2025). Total 57.0%.
- 8509.80.50.80: Humidifiers.
- 8509: Specifically for electromechanical domestic appliances.
- 80.50: Specifically for other appliances.
- Tax: 4.2% Basic, 0.0% Additional (increasing to 30% after April 2, 2025). Total 34.2%.
Important Considerations & Recommendations:
- Material Composition: The exact material composition of your products is critical. Even slight variations can change the HS code.
- End Use: The intended end use of the products can also affect classification.
- April 2, 2025 Tariff Changes: Be aware of the upcoming tariff increases.
- Certifications: Depending on the specific products and destination country, you may need certifications (e.g., CE marking, NSF certification for water contact materials).
- Detailed Product Specifications: Have detailed product specifications (drawings, material lists, etc.) available for customs review.
- Consult a Licensed Customs Broker: I strongly recommend consulting a licensed customs broker in your destination country. They can provide definitive classification advice and ensure compliance with all import regulations.
- Check for Statistical Notes: Some chapters have statistical notes that provide further clarification on classification.
Disclaimer: I am an AI assistant and cannot provide legally binding customs advice. This information is for general guidance only.