match holder
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7319909000 | 70.4% | CN | US | 官方文档 |
| 7319405050 | 67.5% | CN | US | 官方文档 |
| 7616995190 | 87.5% | CN | US | 官方文档 |
| 7616995175 | 37.5% | CN | US | 官方文档 |
| 9608996000 | 17.5% | CN | US | 官方文档 |
| 9608994000 | 17.5% | CN | US | 官方文档 |
商品图片
AI分析
🧵 Sewing & Writing Instruments: The Hidden World of Pins, Needles, and Parts
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Strategy
📌 1. Product Definition & Classification: What Exactly Are "Match Holders" in Trade?
In the context of international trade and HS Code classification, the term "Match Holder" is ambiguous and likely a mistranslation or colloquialism for specific small hardware or stationery items. Based on the provided <DATA>, the relevant categories are Iron/Steel Sewing Needles, Safety Pins, Bodkins, Crochet Hooks (Headings 7319) and Pen Parts/Accessories (Heading 9608), or Aluminum Articles (Heading 7616).
There is no HS Code specifically for "Match Holders" (holders for lighters/fire-starters). However, if "Match Holder" refers to: 1. Needles/Pins for sewing/crafts: Classified under 7319. 2. Parts of Pens/Pencils (sometimes metaphorically called "holders" or "clips"): Classified under 9608. 3. Aluminum fixtures or wire articles: Classified under 7616.
We will proceed by analyzing the most likely interpretations based on the provided <DATA>: Iron/Steel Pins & Needles and Pen Parts/Aluminum Articles.
📦 2. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
| HS Code | Product Description | Application Scenario | Material |
|---|---|---|---|
7319.90.90.00 |
Sewing needles, knitting needles, bodkins, crochet hooks, etc.; Safety pins & other pins (Other) | General sewing pins, steel bodkins, generic steel pins not elsewhere specified | Iron/Steel |
7319.40.50.50 |
Safety pins and other pins: Other | Specific safety pins (e.g., decorative, industrial fasteners) | Iron/Steel |
9608.99.60.00 |
Parts of ballpoint pens, markers, fountain pens (Other) | Pen caps, clips, holders, tips (non-9609 parts) | Various (Metal/Plastic) |
9608.99.40.00 |
Parts of articles provided for in 9608.10 and 9608.30 | Pen nibs, barrels, caps specifically for ballpoint/stylograph pens | Various |
7616.99.51.90 |
Other articles of aluminum: Other | Aluminum clips, small fixtures, non-wire aluminum items | Aluminum |
7616.99.51.75 |
Other articles of aluminum: Articles of wire | Aluminum wire goods, flexible aluminum connectors | Aluminum |
🔍 Key Distinction:
- If "Match Holder" refers to a metal pin or needle used in crafts/sewing → 7319.
- If it refers to a stationery component (like a pen holder/cap) → 9608.
- If it is an aluminum fixture → 7616.
- Note: True "lighter/ match holders" are typically classified under 4202 (if leather/fabric) or 8205/8215 (if metal tools), but these are NOT in<DATA>. We strictly adhere to<DATA>.
💰 3. 2026 Latest Tariff Rate Details (Including Surcharges, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Time: 2025–2026 (Current Trade War Context)
🎯 1. 7319.90.90.00 —— Sewing Needles, Bodkins, Other Steel Pins (General)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 57.5% |
| Tax Calculation | CIF Value × 57.5% |
| De Minimis Exemption | ❌ Not Applicable (High duty items usually excluded or limited) |
| Legal Basis | Section 301: 9903.01.06 → Steel/Aluminum Footnote 9903.88.01 |
📌 Explanation:
- The 50% "Steel/Aluminum/Copper Surcharge" is a critical additional tariff for iron/steel products from China.
- Combined with the standard 7.5% Section 301 rate, the total burden is 57.5%.
- This is a high-duty category. Cost must be fully factored in.
🎯 2. 7319.40.50.50 —— Safety Pins (Specific Category)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 57.5% |
| Tax Calculation | CIF Value × 57.5% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis | Same as above |
📌 Note:
- Safety pins are also classified as iron/steel articles.
- They incur the same 50% additional surcharge for steel products.
- Total rate: 57.5%.
🎯 3. 9608.99.60.00 & 9608.99.40.00 —— Pen Parts (Holders/Caps/Clips)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Section 301 Surcharge | 7.5% |
| Steel/Aluminum/Copper Surcharge | 0% (Not classified as primary steel/aluminum structural goods) |
| Total Tariff | 7.5% |
| Tax Calculation | CIF Value × 7.5% |
| De Minimis Exemption | ⚠️ Check Specifics (Often subject to de minimis rules unless explicitly excluded) |
| Legal Basis | Section 301: 9903.01.04 |
📌 Explanation:
- Pen parts are not subject to the 50% Steel/Aluminum surcharge.
- Only the standard 7.5% Section 301 tariff applies.
- This is a low-duty category compared to steel pins.
🎯 4. 7616.99.51.90 & 7616.99.51.75 —— Aluminum Articles
A. 7616.99.51.90 (Other Aluminum Articles)
| Item | Content |
|---|---|
| Basic Tariff | 2.5% |
| Section 301 Surcharge | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tariff | 77.5% |
| Tax Calculation | CIF Value × 77.5% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis | Section 301: 9903.01.05 + Aluminum Footnote 9903.88.01 |
📌 Explanation:
- Aluminum products face 25% Section 301 + 50% Aluminum Surcharge.
- Total rate: 77.5%.
- This is the highest duty rate in the dataset.
B. 7616.99.51.75 (Aluminum Wire Articles)
| Item | Content |
|---|---|
| Basic Tariff | 2.5% |
| Section 301 Surcharge | 25.0% |
| Steel/Aluminum/Copper Surcharge | 0% (Note: Surcharge may vary by specific wire subtype, but DATA shows no additional 50% here for wire) |
| Total Tariff | 27.5% |
| Tax Calculation | CIF Value × 27.5% |
| De Minimis Exemption | ⚠️ Check Specifics |
| Legal Basis | Section 301: 9903.01.05 |
📌 Note:
- Aluminum wire articles may be treated differently than solid aluminum articles.
- Total rate: 27.5%.
- Significantly lower than solid aluminum articles.
🛠️ 4. Customs Clearance Practical Advice (Combat Pit Avoidance Guide)
✅ 1. Prepare Documentation Checklist (Missing Items = Delay/Rejection)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify material (Steel/Aluminum), type (Pin/Needle/Part), and use. |
| ✅ Material Composition Certificate | ✔️ | Crucial for 7319 (Steel) vs 7616 (Aluminum) classification. |
| ✅ Product Photos | ✔️ | Clear images of the item, including any labels or packaging. |
| ✅ Commercial Invoice | ✔️ | Must correctly describe the item (e.g., "Steel Sewing Needle" not "Match Holder"). |
| ✅ Packing List | ✔️ | Itemized list to avoid consolidation errors. |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 "Material Determines Duty, Steel/Aluminum = 50% Extra!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Steel Pins/Needles | 7319.90.90.00 / 7319.40.50.50 |
Misdeclare as "Plastic Parts" → Fraud/Risk |
| Pen Parts | 9608.99.60.00 |
Misdeclare as "Steel Pins" → 57.5% vs 7.5% |
| Aluminum Fixtures | 7616.99.51.90 |
Misdeclare as "Aluminum Wire" → 77.5% vs 27.5% |
📌 Critical Warning:
- Do NOT use generic terms like "Match Holder" or "Metal Tool" on invoices.
- Be specific: "Steel Safety Pin," "Aluminum Clip," "Pen Cap."
- Misclassification leads to penalties, back taxes, and delays.
✅ 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Mixed Materials | If a "holder" has steel pins and aluminum body, declare separately or use the highest duty component if integrated. |
| OEM Custom Items | Provide design specs to prove material composition. |
| Small Shipments (De Minimis) | Pen parts (9608) may qualify for de minimis ($800) if not explicitly excluded, but Steel/Aluminum items (7319, 7616) are high-risk and often excluded. |
🌍 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7319.90.90.00 |
57.5% | None Specific | High Steel Surcharge |
| 🇺🇸 USA | 9608.99.60.00 |
7.5% | None Specific | Low Duty |
| 🇺🇸 USA | 7616.99.51.90 |
77.5% | None Specific | Highest Duty (Aluminum) |
| 🇨🇳 China | 7319.90.90.00 |
~5-10% | None | No US Surcharge |
| 🇪🇺 EU | 7319.90.90.00 |
~6.5% | CE (if applicable) | No US-style Surcharge |
📌 Conclusion:
- USA is the most expensive market for these items due to Section 301 + Steel/Aluminum Surcharges.
- Pen Parts (9608) are the most cost-effective to export to the US.
- Aluminum Articles (7616) are the most costly.
📌 6. Common Errors & Pitfalls (Blood Lessons)
❌ Error 1: Calling a steel pin a "plastic accessory"
👉 Consequence: Customs seizure, fraud charges, 57.5% back tax + fines.
❌ Error 2: Mixing "Aluminum Wire" (7616.99.51.75) with "Aluminum Articles" (7616.99.51.90)
👉 Consequence: 77.5% instead of 27.5% if misclassified. 50% difference!
❌ Error 3: Using "Match Holder" as the product name
👉 Consequence: Customs cannot classify it. Leads to delay, additional inspection, and potential reclassification at higher duty.
✅ Correct Practice:
"Steel Sewing Needles, 3cm, Pack of 100, HS 7319.90.90.00"
"Aluminum Wire Clip, 2mm, HS 7616.99.51.75"
🎯 7. Conclusion: Professional Declaration, Save Cost!
🎯 Remember:
🔹 "Steel/Aluminum = 50% Extra in USA!"
🔹 "Pen Parts = Low Duty (7.5%)!"
🔹 "Be Specific, Not Generic!"
📌 Tip:
If your product is aluminum wire (7616.99.51.75), ensure it is truly wire (flexible, coiled) and not a rigid article. This can save 50% in tariffs (27.5% vs 77.5%).
📣 Immediate Action:
📞 Consult a Customs Broker + Provide Material Spec + Verify HS Code
🚀 Declare Correctly, Clear Customs Smoothly, Maximize Profit!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tax Matters!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。