150 198 cm synchronous belt
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 5910009000 | 37.6% | CN | US | 官方文档 |
| 5910001020 | 39.0% | CN | US | 官方文档 |
| 4010359000 | 38.3% | CN | US | 官方文档 |
商品图片
AI分析
⚙️ Synchronous Belt (150 x 198 cm) | Rubber Timing Belt for Power Transmission
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Breakdown | Professional Clearance Strategy
📌 I. Product Definition & Classification: What is a "Synchronous Belt"?
A Synchronous Belt (also known as a Timing Belt) is a mechanical drive belt that uses teeth to mesh with a pulley, ensuring precise synchronization between the driver and driven shafts without slippage.
In international trade, these are primarily classified based on their material composition and application: * Rubber Synchronous Belts: The most common type, made of rubber with reinforced cords (fiber or synthetic) and teeth. These fall under Chapter 40 or Chapter 59 depending on the specific construction and primary material. * Key Distinction: * If the belt is primarily rubber-based with reinforcement, it often falls under 4010 (Vulcanized Rubber) or 5910 (Transmission Belts). * The specific HS codes provided below reflect US Import Regulations for Chinese-origin rubber synchronous belts, heavily impacted by Section 301 and Section 122 tariffs.
⚠️ Critical Note:
The dimensions "150 x 198 cm" indicate a long, continuous belt or a specific custom size. Classification depends on whether it is considered a "Transmission Belt" (5910) or a "Rubber Product" (4010). The data provided shows a mix, suggesting different sub-classifications based on technical specs (e.g., fiber reinforcement vs. pure rubber).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided data, here are the four specific HS Codes for Rubber Synchronous Belts, along with their tax implications. All entries originate from China (CN) and are subject to US Import Duties.
| HS Code | Product Description | Key Characteristics | Application |
|--------|--------------------------|-----------------------------|
| 5910.00.90.00 | Rubber Synchronous Belt, General Transmission Belt | Base Tariff: 2.6% | Standard industrial transmission, general machinery |
| 5910.00.10.20 | Rubber Synchronous Belt, Power Transmission (Specific) | Base Tariff: 4.0% | Specific power transmission applications, possibly heavier duty |
| 4010.35.90.00 | Rubber Synchronous Belt, Spec & Material Matched | Base Tariff: 3.3% | Classified under Rubber Products (Ch. 40), likely higher rubber content |
| 5910.00.90.00 | Rubber Synchronous Belt, Other Transmission Belts | Base Tariff: 2.6% | Alternative classification for "Other" transmission belts |
| 5910.00.10.20 | Rubber Synchronous Belt, Artificial Fiber/Synthetic Rubber | Base Tariff: 4.0% | Specific reinforcement materials (fiber/synthetic rubber) |
🔍 Key Insight:
- Chapter 59 (5910) is specifically for "Transmission Belts," which is the most accurate category for synchronous belts.
- Chapter 40 (4010) is for "Vulcanized Rubber," which may apply if the belt is considered a finished rubber product rather than a mechanical transmission component.
- The Base Tariff varies from 2.6% to 4.0% depending on the precise sub-classification.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policies)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025–2026 (Ongoing Trade Restrictions)
🎯 1. HS Code 5910.00.90.00 — Rubber Synchronous Belt (General/Other)
| Item | Details |
|---|---|
| Base Tariff | 2.6% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Tariff | 37.6% |
| Calculation Basis | CIF Value × 37.6% |
| De Minimis Exemption | ❌ Not Eligible (Section 301 & 122 tariffs block de minimis) |
| Legal Authority | USITC:5910.00.90.00 → Section 301 (Footnote 1) → Section 122 |
📌 Explanation:
- Base (2.6%): Standard MFN rate for transmission belts.
- Section 301 (25%): Trade war tariff on Chinese goods.
- Section 122 (10%): Additional tariff for national security/economic reasons.
- Total: 37.6%. This is a high-cost import category.
🎯 2. HS Code 5910.00.10.20 — Rubber Synchronous Belt (Power Transmission/Fiber-Reinforced)
| Item | Details |
|---|---|
| Base Tariff | 4.0% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Tariff | 39.0% |
| Calculation Basis | CIF Value × 39.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Authority | USITC:5910.00.10.20 → Section 301 (Footnote 1) → Section 122 |
📌 Explanation:
- Slightly higher base tariff (4.0%) due to specific classification for "power transmission" or "fiber-reinforced" types.
- Total: 39.0%. This is the highest tariff rate in the dataset.
🎯 3. HS Code 4010.35.90.00 — Rubber Synchronous Belt (Rubber Product Classification)
| Item | Details |
|---|---|
| Base Tariff | 3.3% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Tariff | 38.3% |
| Calculation Basis | CIF Value × 38.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Authority | USITC:4010.35.90.00 → Section 301 (Footnote 1) → Section 122 |
📌 Explanation:
- Classified under Chapter 40 (Rubber), not Chapter 59.
- Total: 38.3%. Middle-ground tariff. May apply if the belt is heavily rubber-dominated and less "mechanical" in classification.
🛠️ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
✅ 1. Preparation Checklist (Non-Negotiable)
| Document | Required? | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must detail material (rubber type), tooth profile, width, length (150x198 cm), and reinforcement (fiber/synthetic). |
| ✅ Technical Drawing | ✔️ | Shows tooth geometry and cross-section to prove it's a "synchronous" belt (not a V-belt). |
| ✅ Commercial Invoice | ✔️ | Must explicitly state: "Rubber Synchronous Belt, Model XYZ, Origin: China." |
| ✅ Certificate of Origin (CO) | ✔️ | Essential for proving Chinese origin (triggers Section 301/122). |
| ✅ Bill of Lading (B/L) | ✔️ | Ensure goods description matches invoice exactly. |
✅ 2. Declaration Strategy (Key Tips)
🔥 "Be Specific, Don't Generalize!"
| Scenario | Correct Declaration | Incorrect Declaration | Consequence |
|---|---|---|---|
| Standard Sync Belt | "Rubber Synchronous Transmission Belt, Section 5910" | "Rubber Belt" | Misclassification → Penalty + Audit |
| High-Rubber Content | "Vulcanized Rubber Belt, Section 4010" | "Mechanical Part" | Wrong HS Code → Rate changes from 37.6% to 38.3% |
| Fiber-Reinforced | "Synthetic Fiber Reinforced Sync Belt, Section 5910.10.20" | "Textile Belt" | Wrong HS Code → Higher base rate (4.0%) |
| Any Chinese Origin | Declare ALL additional tariffs explicitly | Hide Section 301/122 | Seizure & Forfeiture |
✅ 3. Special Circumstances Handling
| Situation | Recommendation |
|---|---|
| Custom Size (150x198 cm) | Provide proof that it is a standard industrial size, not a "one-of-a-kind" prototype, to avoid "Other" classifications that may attract higher scrutiny. |
| Mixed Shipments | If shipping with non-tariffed items, separate declarations are required. Do not bundle rubber belts with electronics to "average" out taxes. |
| Section 122 Exemptions | Currently, no general exemptions for Section 122 on Chinese goods. Verify if your specific product code is excluded (unlikely for belts). |
| Supply Chain Diversification | If possible, source from Vietnam, Thailand, or Mexico to avoid 25% (Sec 301) and 10% (Sec 122) tariffs. This can reduce total tariff from ~38% to 0–5%. |
🌍 V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Total Tariff (CN Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 5910.00.90.00 / 4010.35.90.00 |
37.6% – 39.0% | High due to Sec 301 & 122. No De Minimis. |
| 🇨🇳 China | 4010.35.90.00 |
~3–5% (Import Duty) | Low import duty, but export controls may apply. |
| 🇪🇺 EU | 4010.35.90.00 |
0% (if under tariff quota) | Generally 0% for rubber belts, but requires CE certification. |
| 🇦🇺 Australia | 4010.35.90.00 |
5% | No Section 301/122 equivalent. |
| 🇯🇵 Japan | 4010.35.90.00 |
3.5% – 5% | JEEPA may offer reductions if origin is ASEAN. |
📌 Conclusion:
- The US market is the most expensive for Chinese rubber synchronous belts due to layered tariffs.
- EU, Australia, and Japan are significantly more cost-effective.
- If your end-market is the US, consider supply chain relocation or duty drawback programs (if eligible).
📌 VI. Common Mistakes & Pitfalls (Blood & Tears Lessons)
❌ Mistake 1: Declaring "Rubber Belt" without specifying "Synchronous"
👉 Result: Customs may classify it under a different, potentially higher-rated category. Always specify "Synchronous" or "Timing" belt.
❌ Mistake 2: Ignoring Section 122 Tariff (10%)
👉 Result: Underpayment by 10%. Customs will demand back payment + interest + penalties. Total error: 10% of value.
❌ Mistake 3: Using De Minimis (Section 321) for Imports under $800
👉 Result: Illegal. Section 301 and Section 122 tariffs do not apply to de minimis entries. Your shipment will be seized or taxed upon arrival. Declare correctly.
❌ Mistake 4: Mixing HS Codes in One Line Item
👉 Result: If you have both 5910.00.90.00 and 4010.35.90.00 in one shipment, declare them separately. Mixed declarations increase audit risk.
🎯 VII. Conclusion: Precision in Classification Saves Money!
🎯 Remember the Formula:
Total Tariff = Base Tariff + 25% (Sec 301) + 10% (Sec 122)
For5910.00.90.00: 2.6% + 25% + 10% = 37.6%
For5910.00.10.20: 4.0% + 25% + 10% = 39.0%
For4010.35.90.00: 3.3% + 25% + 10% = 38.3%🔹 "One percent difference in base rate can mean thousands in savings!"
🔹 "Don't let Section 122 catch you off guard!"
📌 Pro Tip:
If you are importing 150x198 cm Synchronous Belts from China to the US, budget for nearly 40% in duties.
Consider:
1. Pre-Ruling: Apply for a binding ruling from CBP to confirm the HS Code.
2. Supply Chain Review: Can you source from a non-China origin to save 35%+?
3. Customs Broker: Hire a US-licensed customs broker with experience in Chapter 59/40 goods.
📣 Take Action Now:
📞 Consult a Customs Expert
📄 Verify HS Code with CBP
💼 Optimize Your Tariff Burden
✨ Professional Clearance, Start with Accurate Classification!
💼 Your Margin Depends on It!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。