Adjustable Arm
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7326908630 | 87.9% | CN | US | 官方文档 |
| 7616995150 | 37.5% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 8302416050 | 88.9% | CN | US | 官方文档 |
| 8302419050 | 38.5% | CN | US | 官方文档 |
商品图片
AI分析
🪟 Adjustable Arm (Curtain Rod Brackets)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Adjustable Arm"?
In the context of home improvement and window treatments, the term "Adjustable Arm" typically refers to Adjustable Curtain Rod Brackets (also known as curtain rod holders, standards, or mountings). These are critical hardware components used to support curtain rods.
In international trade, the classification of these items depends heavily on two factors:
1. Material Composition (Steel/Iron vs. Aluminum vs. Base Metal/Non-ferrous).
2. Specific Function/Use (Specifically for curtains vs. General Building Hardware).
⚠️ Key Distinction Point:
- If made of Steel/Iron → Likely falls under Chapter 73 (Articles of Iron or Steel).
- If made of Aluminum → Likely falls under Chapter 76 (Articles of Aluminum).
- If classified as General Building Hardware rather than specific curtain accessories → May fall under Chapter 83 (Base Metal Hardware).
- Crucial Warning: Steel and Iron products face significantly higher tariffs due to specific trade remedies (Section 232 and Section 301). Aluminum faces lower but still substantial tariffs.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material | Specific Use |
|---|---|---|---|---|
7326.90.86.30 |
Adjustable Curtain Rod Bracket, Steel, for supporting curtain rods | Residential/Commercial curtain support | ✅ Steel/Iron | Specifically for curtains |
7616.99.51.50 |
Adjustable Curtain Rod Bracket, Aluminum, for supporting curtain rods | Residential/Commercial curtain support | ✅ Aluminum | Specifically for curtains |
7326.90.86.88 |
Adjustable Curtain Rod Bracket, Iron or Steel, for supporting curtain rods | Residential/Commercial curtain support | ✅ Steel/Iron | Specifically for curtains |
8302.41.60.50 |
Adjustable Curtain Rod Bracket, Base Metal, for curtains and blinds | General hardware classification | ✅ Base Metal | Specifically for curtains/blinds |
8302.41.90.50 |
Adjustable Curtain Rod Bracket, Base Metal, for building metal fittings | General building hardware classification | ✅ Base Metal | General building fittings |
🔍 Key Reminder:
- Steel/Iron brackets (7326) are subject to the highest total tariffs (~87-88%) due to combined Section 301 (25%) and Section 232 (50%) duties.
- Aluminum brackets (7616) face moderate tariffs (~37.5%).
- General Base Metal classifications (8302) can vary widely depending on whether they are deemed "specific to curtains" or "general building hardware."
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariffs apply based on ongoing trade policies (Section 301 & 232).
🎯 1. 7326.90.86.30 & 7326.90.86.88 —— Steel/Iron Adjustable Brackets
| Item | Content |
|---|---|
| Base Tariff | 2.9% (Ad Valorem) |
| Section 301 Duty | +25.0% (Additional Duty on Chinese Goods) |
| Section 232 Duty | +50.0% (Steel and Aluminum Products - Note: Applies specifically to steel articles) |
| Total Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Basis Path | USITC:7326.90.86.30 → SECTION_301:25% → SECTION_232:50% |
📌 Explanation:
- The 2.9% is the standard MFN (Most Favored Nation) duty for articles of iron or steel.
- The 25% is the Section 301 tariff targeting Chinese imports.
- The 50% is the Section 232 tariff on steel articles.
- Total Effective Rate: 87.9%. This is an extremely high barrier to entry for steel-based curtain hardware.
🎯 2. 7616.99.51.50 —— Aluminum Adjustable Brackets
| Item | Content |
|---|---|
| Base Tariff | 2.5% (Ad Valorem) |
| Section 301 Duty | +25.0% (Additional Duty on Chinese Goods) |
| Section 232 Duty | +10.0% (Aluminum Products - Note: Reduced rate for certain aluminum articles) |
| Total Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Basis Path | USITC:7616.99.51.50 → SECTION_301:25% → SECTION_232:10% |
📌 Note:
- Aluminum brackets are significantly cheaper to import than steel ones due to lower Section 232 rates on specific aluminum products.
- Total rate of 37.5% is still substantial but much more manageable than steel.
🎯 3. 8302.41.60.50 —— Base Metal (Curtain Specific)
| Item | Content |
|---|---|
| Base Tariff | 3.9% (Ad Valorem) |
| Section 301 Duty | +25.0% |
| Section 232 Duty | +50.0% (If classified as steel/iron under base metal umbrella) |
| Total Rate | 88.9% |
| Tax Calculation | CIF Value × 88.9% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Basis Path | USITC:8302.41.60.50 → SECTION_301:25% → SECTION_232:50% |
📌 Warning:
- If classified under Chapter 83 but identified as steel, the 50% Section 232 duty may still apply, pushing the total to 88.9%.
- This is one of the highest duty rates for consumer hardware.
🎯 4. 8302.41.90.50 —— Base Metal (General Building Hardware)
| Item | Content |
|---|---|
| Base Tariff | 3.5% (Ad Valorem) |
| Section 301 Duty | +25.0% |
| Section 232 Duty | +10.0% (If classified as aluminum or non-steel base metal) |
| Total Rate | 38.5% |
| Tax Calculation | CIF Value × 38.5% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Basis Path | USITC:8302.41.90.50 → SECTION_301:25% → SECTION_232:10% |
📌 Note:
- This code is for "other" base metal fittings. If the material is aluminum, the rate is 38.5%.
- If the material is steel, it could be subject to 50% Section 232, but typically, Chapter 83 codes for general hardware might be interpreted differently than Chapter 73. However, 87-88% is the risk if steel is involved.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Document Checklist (Essential)
| Document | Required | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state material (e.g., "Aluminum Alloy 6061" vs. "Stainless Steel 304"). |
| ✅ Product Photos (Labeled) | ✔️ | Show the bracket, mounting holes, and any branding. |
| ✅ Commercial Invoice | ✔️ | Must clearly describe as "Adjustable Curtain Rod Bracket" and specify material. |
| ✅ Packing List | ✔️ | Detail quantity, weight, and dimensions. |
| ✅ Certificate of Origin (CO) | ✔️ | Critical for proving origin (China) and applying correct Section 301/232 rates. |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Material is King, Code is Queen, Steel Suffers, Aluminum Breathes!”
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| Steel Bracket | 7326.90.86.30 or 7326.90.86.88 |
Misdeclaring as Aluminum → Penalty + Back Taxes |
| Aluminum Bracket | 7616.99.51.50 |
Misdeclaring as Steel → Unnecessary 50% Section 232 |
| General Hardware | 8302.41.90.50 (if applicable) |
Over-specifying as "Curtain Only" if it's general use → May limit flexibility |
| Mixed Materials | Break down by component | Claiming "Mixed" without detail → Audit Risk |
✅ 3. Special Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Brackets | Provide design drawings to prove material composition and specific use. |
| Aluminum vs. Steel Ambiguity | Provide a mill test certificate or material safety data sheet (MSDS) to prove aluminum content. |
| Gift Sets | If brackets are part of a curtain rod set, declare as a set if possible, but brackets alone are still subject to their specific HS Code. |
| Small Quantity Samples | Even small quantities are subject to these high tariffs; De Minimis does not apply to Section 301/232 goods from China. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7326.90.86.30 (Steel) |
87.9% | None specific for hardware | Highest duty due to Section 232 & 301 |
| 🇺🇸 USA | 7616.99.51.50 (Aluminum) |
37.5% | None specific for hardware | Much more favorable than steel |
| 🇨🇳 China | 7326.90.86.30 |
~5-10% | CCC (if applicable) | Low import duty, but high export tax potential |
| 🇪🇺 EU | 7326.90.90 |
~6-9% | CE (if applicable) | No Section 232/301 equivalents |
| 🇬🇧 UK | 7326.90.90 |
~6-9% | UKCA (if applicable) | Post-Brexit tariffs apply |
📌 Conclusion:
- USA is the most hostile market for steel curtain hardware due to Section 232.
- Aluminum is the strategic choice for US exports to minimize tariff exposure.
- Europe/UK are far more tariff-friendly but have different regulatory requirements.
📌 VI. Common Mistakes & Pitfall Guide (Lessons Learned the Hard Way)
❌ Mistake 1: Declaring Steel Brackets as Aluminum
👉 Consequence: Customs audit, seizure, and heavy fines. Steel and Aluminum have different material densities and chemical compositions.
❌ Mistake 2: Ignoring Section 232 for Steel
👉 Consequence: Underpaying 50% duty. If caught, you owe back taxes + interest + penalties.
❌ Mistake 3: Using "Hardware" as a generic term without specifying material
👉 Consequence: Customs may choose the highest duty code (Steel) by default.
❌ Mistake 4: Assuming De Minimis applies
👉 Consequence: Packages under $800 from China for Section 301/232 goods are not exempt. They will be seized or assessed full duties.
✅ Correct Approach:
"Adjustable Curtain Rod Bracket, Aluminum Alloy, 10cm Length, Packaged Individually, Model ABC"
🎯 VII. Conclusion: Precision Classification Saves Thousands!
🎯 Remember the Mantra:
🔹 "Steel Suffers 88%, Aluminum Bears 38%, Be Precise or Pay the Price!"
🔹 "Material Dictates Code, Code Dictates Cost, Mistake Dictates Ruin!"
📌 Pro Tip:
If you are exporting to the US:
1. Prefer Aluminum for adjustable arms/brackets to avoid the 50% Section 232 duty.
2. Apply for an Advance Ruling from US Customs if your product’s material or use is borderline.
3. Never use De Minimis for these goods from China; expect full duty assessment.
📣 Take Action Now:
📞 Consult a licensed customs broker + Provide Material Certificates + Apply for HS Code Pre-ruling
🚀 Ensure your Adjustable Arms clear customs smoothly, avoid penalties, and maximize profit margins!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Your Cost Savings Are Worth the Precision!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。