Antistatic Ethylene Elastomer Resin
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3901901000 | 35.0% | CN | US | 官方文档 |
| 3921190010 | 41.5% | CN | US | 官方文档 |
| 3921190090 | 41.5% | CN | US | 官方文档 |
| 3901909000 | 41.5% | CN | US | 官方文档 |
商品图片
AI分析
🧪 Antistatic Ethylene Elastomer Resin
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Class Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Ethylene Elastomer Resin"?
"Antistatic Ethylene Elastomer Resin" refers to a polymeric material primarily composed of ethylene (PE base), modified to possess antistatic properties, and supplied in a primary/intermediate form (resin). In international trade, the classification hinges on two key factors: 1. Material Basis: It belongs to the category of Ethylene Polymers (Polyethylene/PE family). 2. Physical Form: The term "Resin" indicates a primary form (powder, pellets, or granules), not a finished product like sheets, films, or molded parts.
⚠️ Key Distinction:
- If the product is in primary form (resin/powder/pellets) → It falls under Chapter 39, Heading 3901 (Ethylene Polymers).
- If the product is in a finished shape (sheet, film, plate) → It may fall under Heading 3921 (Other Plates, Sheets, Film, Foil, and Strip).
- The "Antistatic" property is a functional additive and does not change the primary classification of the polymer base, unless the product becomes an electrical component (which "resin" implies it is not).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Key Matching Logic |
|---|---|---|---|
3901.90.10.00 |
Other articles of ethylene polymers, other than plates, sheets, film, foil, and strip; Ethylene Elastomers | Primary form ethylene elastomers, antistatic resins, PE blends | ✅ High Match: Explicitly covers "Ethylene Elastomer" in primary/resin form. |
3921.19.00.10 |
Other plates, sheets, film, foil, and strip of polymers of ethylene: Polyethylene | PE sheets/films with antistatic properties | ⚠️ Inference Match: Assumes the "resin" is processed into sheets/films. Lower preference if form is truly resin. |
3921.19.00.90 |
Other plates, sheets, film, foil, and strip of polymers of ethylene: Other | General PE products not elsewhere specified | ⚠️ Inference Match: Broad category for PE articles. Requires assumption of final form. |
3901.90.90.00 |
Other articles of ethylene polymers, other than specified in previous subheadings | General ethylene polymer products (non-elastomer, non-specified) | ✅ Fallback Match: If "Elastomer" is not confirmed, this generic category applies. |
🔍 Key Reminder:
- "Resin" = Primary Form: Customs authorities typically classify "Resin" under 3901 (Polymers in Primary Forms) rather than 3921 (Articles).
- "Elastomer" Specificity: If the product is technically an Ethylene-Propylene-Diene Monomer (EPDM) or similar ethylene-based elastomer, 3901.90.10.00 is the most precise fit.
- "Antistatic" is Irrelevant to HS: This is a functional property added via masterbatches or additives. It does not trigger a different HS code (like Chapter 85 for electrical goods) unless it is a finished electrical component.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharge Policies)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (and subsequent imports)
🎯 1. 3901.90.10.00 – Ethylene Elastomers (Resin Form)
| Item | Content |
|---|---|
| Base Tariff Rate | 0% (ad valorem) |
| USITC Surcharge (Section 301) | +25% |
| IEEPA Surcharge (China-Specific) | +10% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Exemption Available? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3901.90.10.00 → FOOTNOTE:3901.90 |
📌 Explanation:
- The 0% base rate reflects normal trade relations for this specific subheading.
- The +25% is the standard Section 301 tariff on Chinese polymeric materials.
- The +10% is the IEEPA surcharge specifically targeting Chinese-origin goods under recent executive orders.
- Total 35% is a high tariff rate. Importers must plan for significant cost impacts.
🎯 2. 3921.19.00.10 / 3921.19.00.90 – Other Polyethylene Articles (Inferred Form)
| Item | Content |
|---|---|
| Base Tariff Rate | 6.5% (ad valorem) |
| USITC Surcharge (Section 301) | +25% |
| IEEPA Surcharge (China-Specific) | +10% |
| Total Tax Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Exemption Available? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:3921.19.00.10/90 → FOOTNOTE:3921 |
📌 Note:
- If customs determines the product is not in primary form (resin) but in a sheet/film form, the base rate jumps to 6.5%.
- Combined with the same surcharges, the total rate becomes 41.5%, which is 6.5% higher than the elastomer resin classification.
- Risk: Misclassifying a resin as a sheet/film can lead to underpayment and penalties. Conversely, misclassifying a sheet as resin might lead to overpayment but less risk of penalty.
🎯 3. 3901.90.90.00 – Other Ethylene Polymers (Generic)
| Item | Content |
|---|---|
| Base Tariff Rate | 6.5% |
| USITC Surcharge (Section 301) | +25% |
| IEEPA Surcharge (China-Specific) | +10% |
| Total Tax Rate | 41.5% |
| De Minimis Exemption Available? | ❌ NO (deny_de_minimis) |
📌 Explanation:
- This is a fallback category if the "Elastomer" designation is not sufficiently documented.
- The rate is identical to the 3921 series due to the same surcharge structure.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
✅ 1. Document Checklist (All Required)
| Document | Mandatory? | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must explicitly state: "Ethylene Elastomer," "Antistatic," "Primary Form (Resin/Pellets)." |
| ✅ Technical Data Sheet (TDS) | ✔️ | Shows chemical composition (ethylene content, additives). |
| ✅ Product Photos (Clear Labeling) | ✔️ | Show bags/silos labeled "Resin" or "Pellets," NOT "Sheet" or "Film." |
| ✅ Commercial Invoice | ✔️ | Must clearly state "Antistatic Ethylene Elastomer Resin" – avoid vague terms like "Plastic Material." |
| ✅ Certificate of Origin (CO) | ✔️ | Essential for verifying Chinese origin to apply surcharges accurately. |
| ✅ Customs Ruling (Optional but Recommended) | ✔️ | Pre-application for HS Code classification to avoid disputes. |
✅ 2. Declaration Tips (Critical Mantras)
🔥 "Resin is 3901, Sheet is 3921. Name it right, tax stays light!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Product is Pellets/Powder | 3901.90.10.00 (Elastomer) or 3901.90.90.00 (Other) |
Declaring as 3921 (Sheet) → Higher Base Rate |
| Product is Sheet/Film | 3921.19.00.10/90 |
Declaring as 3901 (Resin) → Under-declaration Risk |
| Antistatic Additive Included | Still 3901 or 3921 |
Declaring as 8532 (Capacitors) → Illegal Misclassification |
| Mixed Packaging (Resin + Parts) | Declare Main Item Separately | Mixing → Audit Trigger |
📌 Key Point:
- "Antistatic" does NOT change the HS Code. Do not try to classify it under Chapter 85 (Electrical Machinery) unless it is a finished electrical component (e.g., antistatic bag, antistatic mat). As a "Resin," it is a raw material.
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Resin | Provide customer order + formula sheet. Declare as "Ethylene Elastomer Resin" to support 3901.90.10.00. |
| Antistatic Masterbatch | If it’s a concentrate with high pigment/additive content, it may still be 3901.90.90.00. Ensure "Elastomer" base is declared. |
| Blended with Other Polymers | If >50% ethylene, 3901 applies. If less, it may fall under 3902 or 3903. Check composition. |
| Re-granulated Resin | Still 3901. Ensure it is not contaminated with other materials that would change classification. |
🌍 V. Global Main Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3901.90.10.00 |
35% (Total) | None Specific | High tariffs due to Section 301 + IEEPA. |
| 🇨🇳 China | 3901.90.10.00 |
0% | None | No surcharges for domestic trade. |
| 🇪🇺 EU | 3901.90.90 |
0%~6.5% | REACH Registration | REACH compliance for additives is critical. |
| 🇦🇺 Australia | 3901.90.90 |
5% | None | Low base rate, no major surcharges. |
| 🇯🇵 Japan | 3901.90.90 |
0%~5% | JIS Standard | Free Trade Agreement (JSEPA) may apply if eligible. |
📌 Conclusion:
- USA is the most challenging market due to 35% total tariff.
- EU/JP/AU are more tariff-friendly, but REACH (EU) and JIS (JP) regulatory compliance is stricter.
- Strategic Advice: For US imports, consider supply chain diversification (e.g., sourcing from Vietnam or Mexico if possible) to avoid IEEPA/Section 301 surcharges.
📌 VI. Common Mistakes & Pitfall Guide (Blood-Teachings)
❌ Mistake 1: Declaring "Antistatic Resin" as "Electrical Component" (8532)
👉 Consequence: Illegal misclassification. Penalties + back taxes + potential seizure.
✅ Fix: It is a raw material, not a component. Stick to Chapter 39.
❌ Mistake 2: Confusing "Resin" with "Sheet"
👉 Consequence:
- If you declare Resin as Sheet (3921), you pay 41.5% instead of 35%.
- If you declare Sheet as Resin, Customs may audit you for under-declaration if they find physical evidence of sheets.
✅ Fix: Be precise. "Resin" = Powder/Pellets. "Sheet" = Flat product.
❌ Mistake 3: Ignoring "Antistatic" Additive Impact
👉 Consequence: If additives exceed certain thresholds, it may affect REACH registration in the EU.
✅ Fix: Provide full composition list for regulatory compliance, even if HS Code doesn’t change.
❌ Mistake 4: Not Providing Technical Data Sheet (TDS)
👉 Consequence: Customs cannot verify "Elastomer" status → Default to higher-tax generic category.
✅ Fix: Always attach TDS showing "Ethylene Elastomer" base.
🎯 VII. Conclusion: Precise Classification, Cost Optimization, Smooth Clearance!
🎯 Remember the Mantra:
🔹 "Resin is 3901, Sheet is 3921. Name it right, tax stays light!"
🔹 "Antistatic is a feature, not a class. Stick to Polymers, avoid the pass."
🔹 "USA 35%, EU 0-6%. Know your market, know your rate."
📌 Pro Tip:
- If your ethylene elastomer resin is originating from Vietnam, Mexico, or Thailand, you may exempt IEEPA and Section 301 surcharges in the US, reducing the total rate to 0%~6.5%.
- Consider applying for an Advance Ruling from US CBP if your product is borderline between "Elastomer" and "Other Polymer" to ensure clarity and avoid future disputes.
📣 Immediate Action:
📞 Contact a professional customs broker + Provide Product Photos + Apply for HS Code Advance Ruling
🚀 Let your Ethylene Elastomer Resin clear smoothly, maximize profits, and minimize risks!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every cent of your cost deserves precise calculation!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。