Architectural Drawing Paper
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4811592000 | 10.0% | CN | US | 官方文档 |
| 4811904090 | 35.0% | CN | US | 官方文档 |
| 4802562000 | 10.0% | CN | US | 官方文档 |
| 4802572000 | 35.0% | CN | US | 官方文档 |
AI分析
📐 Architectural Drawing Paper (Drawing Paper for Graphic Purposes)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
📌 1. Product Definition & Classification: What exactly is "Architectural Drawing Paper"?
Architectural drawing paper is a specialized uncoated paperboard used for writing, printing, or other graphic purposes. In international trade, it is strictly classified under Chapter 48 (Paper and Paperboard). The key distinction lies in the weight (GSM), dimensions, and manufacturing process.
Key Characteristics: * Uncoated: Not coated, impregnated, covered, or surface-decorated. * Fiber Content: Must not contain fibers obtained by a mechanical or chemi-mechanical process, or such fibers must constitute ≤ 10% by weight of the total fiber content. * Weight Range: Typically weighs between 40 g/m² and 150 g/m². * Sheet Size: Rectangular sheets (including square), with specific dimensional thresholds for sub-classification.
⚠️ Critical Distinction Point:
- If the paper is coated/printed → It falls under Heading 4811.
- If the paper is uncoated and meets specific size/weight criteria → It falls under Heading 4802.
- Hand-made paper is excluded from these specific subheadings.
📦 2. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, there are 4 specific HS Codes for paper products. However, only 2 apply to "Uncoated Architectural Drawing Paper" (Heading 4802). The other two apply to "Coated/Printed Paper" (Heading 4811). We will analyze all relevant codes from the input data, highlighting why the correct one applies to architectural drawing.
| HS Code | Product Description | Applicable Scenario | Uncoated/Coated? |
|---|---|---|---|
4802.56.20.00 |
Uncoated paper, drawing paper, weighing 40–150 g/m², sheets with one side >360mm and other >150mm | Standard Architectural Drafting Paper (Large sheets) | ✅ Uncoated |
4802.57.20.00 |
Uncoated paper, drawing paper, weighing 40–150 g/m², other sizes (not meeting 4802.56 criteria) | Smaller/Standard Drawing Paper | ✅ Uncoated |
4811.59.20.00 |
Coated/Impregnated paper, printing paper, strips/rolls >15cm or sheets >36cm x 15cm | Coated drafting paper, printed plots, laminated drawings | ❌ Coated/Printed |
4811.90.40.90 |
Coated/Other paper, weighing ≤15 g/m², other products | Ultra-thin coated papers, non-drawing applications | ❌ Coated/Other |
🔍 Key Insight for Architectural Paper:
-4802.56.20.00and4802.57.20.00are the correct codes for Uncoated architectural drawing paper.
-4811.59.20.00is incorrect for uncoated paper but may apply if the paper is coated (e.g., matte finish, plastic-impregnated) and used for printing.
-4811.90.40.90applies to very thin paper (≤15 g/m²), which is not typical for architectural drawing paper (usually ≥40 g/m²).
💰 3. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
✅ Applicable Country: USA (US)
✅ Origin: China (CN)
✅ Effective Date: 2025-11-10 onwards
🎯 1. 4802.56.20.00 —— Uncoated Drawing Paper (Large Sheets)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 0.0% |
| Total Tariff Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% = $0 |
| De Minimis Eligibility | N/A (Full duty exemption) |
| Legal Basis | HTSUS 4802.56.20.00; USITC Footnote for China |
📌 Explanation:
- This code benefits from 0% total tariff.
- No Section 301 or IEEPA surcharges apply to this specific uncoated drawing paper subtype.
- Highly competitive for importers.
🎯 2. 4802.57.20.00 —— Uncoated Drawing Paper (Other Sizes)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% (Not listed in data for this code) |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value × 25.0% |
| De Minimis Eligibility | ❌ Not Eligible (deny_de_minimis likely applies for >$800 if subject to 301) |
| Legal Basis | HTSUS 4802.57.20.00; USITC Footnote 9903.88.01 (if applicable) |
📌 Explanation:
- Despite being uncoated, this subtype incurs a 25% surcharge due to trade policy measures.
- Critical Risk: If you misclassify4802.57.20.00instead of4802.56.20.00, you pay an extra 25%.
- Dimensional precision is key to avoiding this higher rate.
🎯 3. 4811.59.20.00 —— Coated/Impregnated Printing Paper
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value × 25.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis | HTSUS 4811.59.20.00 |
📌 Explanation:
- If your "architectural paper" is coated (e.g., matte, glossy, plastic-impregnated) and used for printing, it may fall here.
- Do not use this for uncoated paper. Misclassification can lead to penalties.
🎯 4. 4811.90.40.90 —— Other Coated Paper (≤15 g/m²)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value × 25.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis | HTSUS 4811.90.40.90 |
📌 Explanation:
- Applies to very thin paper (≤15 g/m²).
- Not suitable for standard architectural drawing paper (which is ≥40 g/m²).
- Use only for specialty lightweight coated papers.
🛠️ 4. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Documentation Checklist (Essential)
| Document | Required? | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must state: Uncoated, Weight (g/m²), Fiber Content (≤10% mechanical), Dimensions. |
| ✅ Commercial Invoice | ✔️ | Clearly describe as "Uncoated Architectural Drawing Paper, Heading 4802." |
| ✅ Packing List | ✔️ | Detail sheet sizes and quantities. |
| ✅ Certificate of Origin | ✔️ | For potential FTZ/FTA benefits (if applicable). |
| ✅ Third-Party Test Report | ✔️ | Confirm fiber content and weight to avoid misclassification. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Uncoated 4802, Coated 4811, Size Matters, Tax Rate Varies!"
| Scenario | Correct HS Code | Incorrect HS Code | Consequence |
|---|---|---|---|
| Uncoated, >360mm x 150mm, 40-150 g/m² | 4802.56.20.00 (0%) |
4802.57.20.00 |
Pay extra 25% |
| Uncoated, <360mm or <150mm, 40-150 g/m² | 4802.57.20.00 (25%) |
4802.56.20.00 |
Risk of penalty for wrong size |
| Coated/Printed, >36cm x 15cm | 4811.59.20.00 (25%) |
4802.56.20.00 |
Severe Penalty for misclassification |
| Thin Coated Paper (≤15 g/m²) | 4811.90.40.90 (25%) |
4802.57.20.00 |
Wrong weight range, incorrect code |
✅ 3. Special Cases
| Situation | Advice |
|---|---|
| Mixed Shipment | Separate uncoated (4802) and coated (4811) papers on different lines. |
| Sample vs. Commercial | Ensure commercial shipments match the declared specs. |
| Hand-made Paper | Excluded from these codes; use Heading 4802.31.00.00 or similar. |
🌍 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 4802.56.20.00 |
0% | Best for large uncoated sheets |
| 🇺🇸 USA | 4802.57.20.00 |
25% | Smaller uncoated sheets |
| 🇨🇳 China | 4802.56.20.00 |
5% | No additional duties |
| 🇪🇺 EU | 4802.56.20.00 |
0% (if FTA) | CE marking not required for paper |
| 🇬🇧 UK | 4802.56.20.00 |
0% | Post-Brexit tariffs |
📌 Conclusion:
- USA offers 0% duty for large uncoated drawing paper (4802.56.20.00).
- Small uncoated sheets or coated papers incur 25%.
- Precision in dimensions and coating status is critical to saving 25%.
📌 6. Common Errors & Pitfalls
❌ Error 1: Classifying coated paper as uncoated
👉 Consequence: Wrong HS Code (4802 vs 4811), potential penalties.
❌ Error 2: Ignoring sheet dimensions for 4802.56 vs 4802.57
👉 Consequence: Paying 25% extra duty by using 4802.57.20.00 when 4802.56.20.00 applies.
❌ Error 3: Assuming all drawing paper is ≥40 g/m²
👉 Consequence: If ≤15 g/m² and coated, it falls under 4811.90.40.90 (25%).
✅ Correct Practice:
"Uncoated Architectural Drawing Paper, 90 g/m², Sheets 914mm x 610mm, Heading 4802"
🎯 7. Conclusion: Professional Classification Saves Money!
🎯 Key Takeaways:
🔹 "Uncoated + Large Size = 0% Duty (
4802.56.20.00)"
🔹 "Uncoated + Small Size = 25% Duty (4802.57.20.00)"
🔹 "Coated Paper = 25% Duty (4811.59.20.00)"
🔹 "Thin Coated (≤15 g/m²) = 25% Duty (4811.90.40.90)"
📌 Pro Tip:
Always verify sheet dimensions and coating status before declaring. A simple measurement error can cost 25% of your cargo value.
📣 Immediate Action:
📞 Contact your customs broker with exact sheet sizes and fiber content details.
🚀 Apply for an Advance Ruling if you have a mixed product line.
💼 Precision in classification = Savings in tariffs!
✨ Professional customs clearance starts with accurate HS Code selection!
💼 Every percentage point counts in global trade!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。