Balance Board
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7326190080 | 87.9% | CN | US | 官方文档 |
| 7326190010 | 87.9% | CN | US | 官方文档 |
| 8708995500 | 37.5% | CN | US | 官方文档 |
| 8483908080 | 37.8% | CN | US | 官方文档 |
| 8708990300 | 35.0% | CN | US | 官方文档 |
商品图片
AI分析
⚖️ Balance Board (Steel Weight Blocks / Balancing Masses)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is a "Balance Board" in Trade?
In international trade, the term "Balance Board" is ambiguous and can refer to fitness equipment, automotive parts, or industrial mechanical components. However, based on the provided data, these are specifically identified as Steel Weight Blocks/Balancing Masses (often cast iron or steel) used for: 1. Automotive/Industrial Balancing: Wheels, shafts, or rotating machinery. 2. Structural Counterweights: Machinery foundations or lifting equipment.
⚠️ Critical Distinction:
- If the product is a steel weight/block intended for balancing vehicles (e.g., wheel weights) or machinery parts → It falls under Chapter 87 or 84.
- If the product is a general steel item not specifically defined as a machine part → It falls under Chapter 73 (Articles of Iron or Steel).
- Misclassification Risk: Declaring automotive balancing blocks as "General Steel Products" (Ch 73) may incur higher tariffs (87.9%) due to Section 232/Section 301 overlaps, whereas declaring them correctly as auto parts (Ch 87) may reduce the rate to 35-37.5%.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority对照)
| HS Code | Product Description | Application Scenario | Tax Category Type |
|---|---|---|---|
7326.19.00.80 |
Other Articles of Iron or Steel (Catch-all for Steel Balance Blocks) | General industrial steel weights, non-specific structural counterweights | ❌ High Tariff Zone (Ch 73) |
7326.19.00.10 |
Other Articles of Iron or Steel (Parts/Components Catch-all) | Steel blocks classified loosely as generic mechanical components | ❌ High Tariff Zone (Ch 73) |
8708.99.55.00 |
Parts and Accessories of Motor Vehicles (Suspension/Balancing Systems) | Wheel balancing weights, automotive suspension components | ✅ Optimized Zone (Ch 87) |
8483.90.80.80 |
Parts of Transmission and Mechanical Power-Transfer Parts | Balancing masses for rotating shafts, gears, or industrial machinery | ✅ Optimized Zone (Ch 84) |
8708.99.03.00 |
Other Parts and Accessories of Motor Vehicles (Catch-all) | Automotive parts not specifically listed elsewhere, generic car parts | ✅ Best Rate Zone (Ch 87) |
🔍 Key Insight:
- Chapter 73 (7326...) is the "Dumpling/Bottom" category for steel. It attracts higher additional tariffs because it is classified as general steel products, which are heavily targeted by trade remedies.
- Chapter 87 (8708...) and Chapter 84 (8483...) are "Functional" categories. If the balance block is clearly identifiable as a part of a car (e.g., wheel weight) or a specific machine (e.g., flywheel balance), it can avoid the full steel tariff impact, though Section 301 and Section 232 still apply.
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current rates apply for imports from China.
🎯 1. 7326.19.00.80 & 7326.19.00.10 — General Steel Balance Blocks (High Risk)
| Item | Content |
|---|---|
| Basic Tariff | 2.9% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% (List 3/4A) |
| Section 232 Tariff | +10% (Steel, Aluminum, Copper Products) |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Eligible (Strictly controlled for steel/iron) |
| Legal Basis | USITC:7326.19.00.10/80 + Section 301: Footnote 9903.88.01 + Section 232: Steel Tariff |
📌 Explanation:
- This is the most expensive classification.
- It combines the basic duty, the 25% Section 301 tariff, and the 10% Section 232 steel tariff.
- Strategy: Avoid this classification unless the product is truly a generic steel item not used in vehicles or specific machinery.
🎯 2. 8708.99.55.00 — Automotive Balance Parts (Wheel Weights, etc.)
| Item | Content |
|---|---|
| Basic Tariff | 2.5% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| Section 232 Applicability | ⚠️ Note: Some auto parts are exempt from Section 232, but others are included. Data shows no 10% steel add-on here, suggesting specific auto part exemptions or different calculation paths. |
| Legal Basis | USITC:8708.99.55.00 + Section 301: Footnote 9903.88.01 |
📌 Explanation:
- Significant savings compared to Ch 73.
- Applicable if the balance board is specifically designed for automotive suspension or wheel balancing.
🎯 3. 8483.90.80.80 — Mechanical Transmission Parts
| Item | Content |
|---|---|
| Basic Tariff | 2.8% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% |
| Total Tax Rate | 37.8% |
| Tax Calculation | CIF Value × 37.8% |
| Legal Basis | USITC:8483.90.80.80 + Section 301: Footnote 9903.88.01 |
📌 Explanation:
- Suitable for balancing masses used in industrial machinery, shafts, or gear systems.
- Rate is very similar to the auto parts category.
🎯 4. 8708.99.03.00 — Other Auto Parts (Catch-all)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| Legal Basis | USITC:8708.99.03.00 + Section 301: Footnote 9903.88.01 |
📌 Explanation:
- Lowest Effective Rate in the dataset.
- Applicable if the product is an automotive part that doesn't fit specific subheadings but is clearly for use in motor vehicles.
🛠️ IV. Customs Clearance Operational Advice (Practical Pitfall Guide)
✅ 1. Documentation Checklist (Essential)
| Document | Required? | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must state material (e.g., Cast Iron, Steel), weight, and intended use (e.g., "For Wheel Balancing"). |
| ✅ Engineering Diagrams | ✔️ | Show how it attaches to a wheel, axle, or machine. Proof of function is key to avoiding Ch 73. |
| ✅ Product Photos | ✔️ | Clear images showing the shape, holes, adhesive backing (if any), or mounting points. |
| ✅ Commercial Invoice | ✔️ | Describe as "Automotive Wheel Balance Weight" or "Machinery Shaft Balancing Mass", NOT just "Steel Block". |
| ✅ Origin Certificate (CO) | ✔️ | Required for Section 301 determination. |
| ✅ Binding Ruling (Optional) | ✔️ | Highly recommended to get pre-approval for HS Code 8708.99.03.00 or 8483.90.80.80. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Function Defines Code, Steel Name Raises Price!"
| Scenario | Correct Declaration | Wrong Declaration | Result |
|---|---|---|---|
| Wheel Weights | 8708.99.03.00 (Auto Part) |
"Steel Weight Block" | 35% vs 87.9% |
| Shaft Balancer | 8483.90.80.80 (Mach Part) |
"Iron Counterweight" | 37.8% vs 87.9% |
| Generic Steel Block | 7326.19.00.80 (Steel) |
"Car Part" (if not used in cars) | Penalty for misdeclaration |
✅ 3. Special Handling
| Situation | Advice |
|---|---|
| OEM Wheel Weights | Provide OEM purchase order and design specs to prove automotive use. |
| Mixed Shipment | Separate automotive parts from general steel items in different boxes/pallets if possible, to apply different HS Codes correctly. |
| Section 232 Steel Tariff | Verify if the specific auto part (8708) is exempt from the 10% Section 232 steel tariff. Data suggests 8708.99.03.00 may have better treatment. |
🌍 V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 8708.99.03.00 |
35.0% | No specific cert needed for customs | Best rate for auto parts |
| 🇺🇸 USA | 7326.19.00.80 |
87.9% | None | Avoid if possible |
| 🇪🇺 EU | 8708.99.90 |
~4.5% + Duties | CE/RoHS (if electronic components) | Lower basic duties, no Section 301 |
| 🇨🇳 China | 7326.19.00 |
0% - 10% | None | Domestic trade not relevant for export |
📌 Conclusion:
- USA is the critical market due to high Section 301 and Section 232 tariffs.
- Classification is Cost-Driven: Choosing the right HS Code (Auto/Machine Part vs. General Steel) saves ~50% in duties.
📌 VI. Common Mistakes & Pitfall Guide (Blood Tears Lessons)
❌ Mistake 1: Declaring "Wheel Weights" as "Steel Products" (7326)
👉 Consequence: Pay 87.9% instead of 35-37.5%. Lose 50%+ in costs.
❌ Mistake 2: Vague Description: "Metal Block"
👉 Consequence: Customs officer chooses the safest (highest) rate, which is usually Ch 73.
❌ Mistake 3: Ignoring Section 232 for Steel
👉 Consequence: If declared as Ch 73, you pay the extra 10% steel tariff on top of Section 301.
✅ Correct Way:
"Steel Wheel Balance Weight, OEM Part for [Car Brand], Model [XXX], Cast Iron"
🎯 VII. Conclusion: Professional Declaration, Save Money, Clear Fast!
🎯 Remember the Mantra:
🔹 "Auto Part Code (8708/8483) saves you 50%! Steel Code (7326) kills your profit!"
🔹 "Describe the Function, Not Just the Material!"
📌 Pro Tip:
- If your balance blocks are exclusively for automotive use, insist on 8708.99.03.00 (35.0%).
- If they are for industrial machinery, use 8483.90.80.80 (37.8%).
- Only use 7326 if they are generic structural weights with no specific machine/vehicle integration.
📣 Immediate Action:
📞 Contact your customs broker with product photos and technical drawings.
🚀 Apply for a Binding Tariff Information (BTI) or Advance Ruling from US CBP to lock in the lower HS Code and avoid surprises.
✨ Professional Customs Clearance Starts with Precise Classification!
💼 Every percentage point saved in tariffs is pure profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。