Candle Mold
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926909905 | 22.8% | CN | US | 官方文档 |
| 8480718045 | 38.1% | CN | US | 官方文档 |
| 4016990500 | 20.9% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 8480799090 | 38.1% | CN | US | 官方文档 |
商品图片
AI分析
🕯️ Candle Mold (Silicone) – The Ultimate Import & Customs Clearance Guide
🌐 HS Code Reference & Customs Strategy | 2026 Latest Tariff Analysis | Professional Clearance Protocol
📌 I. Product Definition & Classification: What Exactly is a "Silicone Candle Mold"?
A Candle Mold is a tool used in manufacturing or crafting to shape molten wax into specific forms. In international trade, its classification depends heavily on two factors:
1. Material Composition: Is it primarily plastic (synthetic resin) or rubber (silicone elastomer)?
2. Functional Purpose: Is it classified as a general industrial mold (HS Chapter 84) or a general article of plastic/rubber (HS Chapter 39 or 40)?
⚠️ Key Distinction:
- If classified as a general article of plastic/rubber (e.g., simple silicone casting mold) → It often falls under Chapter 39 (Plastics) or Chapter 40 (Rubber).
- If classified as an industrial tool/mold (specifically for metal, plastic, or rubber molding) → It may fall under Chapter 84 (Machinery).
Note: For candle molds, U.S. Customs and Border Protection (CBP) frequently debates whether they are "molds" (Ch. 84) or "articles" (Ch. 39/40). This leads to significant tariff differences.
📦 II. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the provided data, here are the five possible HS Codes for Silicone Candle Molds, along with their descriptions and tariff implications.
| HS Code | Product Description | Material/Function Basis | Total Tax Rate |
|---|---|---|---|
3926.90.99.05 |
Silicone Candle Mold, Plastic Attribute | Silicone viewed as Plastic/Synthetic Resin; classified as "Other plastic articles" | 22.8% |
8480.71.80.45 |
Silicone Candle Mold, Rubber/Plastic Mold | Silicone viewed as Rubber/Plastic Molding Tool; classified under Chapter 84 (Molds) | 38.1% |
4016.99.05.00 |
Silicone Candle Mold, Vulcanized Rubber | Silicone viewed as Vulcanized Rubber/Elastomer; classified as "Other vulcanized rubber articles" | 20.9% |
3926.90.99.89 |
Silicone Candle Mold, Plastic Article | Silicone viewed as Plastic/Synthetic Material; "Other plastic articles" (different subheading) | 22.8% |
8480.79.90.90 |
Silicone Candle Mold, Other Mold | Silicone viewed as Rubber/Plastic Mold; "Other molds" under Chapter 84 | 38.1% |
🔍 Critical Insight:
- Chapter 84 Codes (8480...) carry a 38.1% total tax rate due to high Section 301/122 tariffs.
- Chapter 39/40 Codes (3926...,4016...) carry lower rates (20.9% - 22.8%).
- Strategy: Aim for Chapter 39 or 40 classification if the mold is not a specialized industrial tool for metal/precise polymer injection molding, but rather a flexible silicone casting mold.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (including subsequent imports)
🎯 1. Classification under Chapter 39 (Plastics)
(Codes: 3926.90.99.05 & 3926.90.99.89)
| Item | Detail |
|---|---|
| Basic Tariff | 5.3% (Ad Valorem) |
| Section 301/122 Additional Tariff | 7.5% |
| IEEPA Additional Tariff | 10% (Targeting China-origin goods) |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Eligibility | ❌ No (Denied due to additional tariffs) |
| Legal Basis Path | IEEPA:9903.01.25 → Section 301:7.5% → USITC:3926.90.99 |
📌 Explanation:
- These codes treat silicone as a plastic/synthetic resin.
- The 10% IEEPA tariff is mandatory for China-origin goods under current executive orders.
- Total burden: 22.8%.
🎯 2. Classification under Chapter 40 (Rubber)
(Code: 4016.99.05.00)
| Item | Detail |
|---|---|
| Basic Tariff | 3.4% (Ad Valorem) |
| Section 301/122 Additional Tariff | 7.5% |
| IEEPA Additional Tariff | 10% |
| Total Tax Rate | 20.9% |
| Tax Calculation | CIF Value × 20.9% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → Section 301:7.5% → USITC:4016.99.05 |
📌 Explanation:
- This is the lowest tax rate among the options.
- Requires proving silicone is treated as vulcanized rubber/elastomer rather than plastic.
- Total burden: 20.9%.
🎯 3. Classification under Chapter 84 (Machinery/Molds)
(Codes: 8480.71.80.45 & 8480.79.90.90)
| Item | Detail |
|---|---|
| Basic Tariff | 3.1% (Ad Valorem) |
| Section 301/122 Additional Tariff | 25.0% |
| IEEPA Additional Tariff | 10% |
| Total Tax Rate | 38.1% |
| Tax Calculation | CIF Value × 38.1% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → Section 301:25% → USITC:8480.71/79 |
📌 Explanation:
- Chapter 84 molds are subject to a much higher 25% additional tariff (vs. 7.5% for plastics/rubber).
- Even though the basic tariff is lower (3.1%), the additional duties make this the most expensive option.
- Total burden: 38.1%.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Preparation Checklist (Non-Negotiable)
| Document | Required | Purpose |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Detail material composition (e.g., "100% Platinum-Cure Silicone"). |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Proves chemical composition (helps classify as Rubber vs. Plastic). |
| ✅ High-Resolution Photos | ✔️ | Show flexibility, seams, and usage (candle inside mold). |
| ✅ Commercial Invoice | ✔️ | Clearly state: "Silicone Candle Mold, Material: Silicone Rubber." Avoid vague terms like "Plastic Tool." |
| ✅ Origin Certificate | ✔️ | Confirm China origin to apply correct IEEPA tariffs. |
| ✅ Packing List | ✔️ | Ensure no misdeclaration of accessories. |
✅ 2. Classification Strategy (Key Mantra)
🔥 "Rubber Wins on Cost, Plastic is Middle Ground, Machinery is the Trap!"
| Situation | Recommended HS Code | Risk Level |
|---|---|---|
| Flexible Silicone Mold (used for casting candles, soap, concrete) | 4016.99.05.00 |
🟢 Lowest Risk/Cost (20.9%) |
| Rigid Plastic Mold (if made of hard plastic, not silicone) | 3926.90.99.05 |
🟡 Medium Risk (22.8%) |
| Industrial Injection Molds (metal/plastic for mass production) | 8480.71.80.45 |
🔴 High Risk/Cost (38.1%) |
📌 Warning:
- Do NOT classify a flexible silicone candle mold as a "mold" under Chapter 84 unless it is a complex, specialized industrial tool. Simple silicone molds are often better classified under Chapter 40 (Rubber).
- Misclassification as Chapter 84 can result in 17.2% extra tax (38.1% - 20.9%) per shipment.
✅ 3. Special Cases & Mitigation
| Scenario | Handling Advice |
|---|---|
| OEM Custom Molds | Provide design drawings to prove it’s a "mold" only if you accept the 38.1% rate. Otherwise, emphasize "casting article" status. |
| Mixed Shipments | If shipping plastic and silicone molds together, declare separately. Do not mix to avoid scrutiny. |
| Pre-Ruling Request | For large volumes, apply for an Advance Ruling from CBP to lock in Chapter 39/40 classification. |
| De Minimis (Section 321) | ❌ Not Applicable. Due to IEEPA and Section 301 tariffs, de minimis exemptions are denied for China-origin goods under these HS codes. |
🌍 V. Global Market Comparison (2026 Outlook)
| Market | Recommended HS Code | Estimated Duty | Key Requirement |
|---|---|---|---|
| 🇺🇸 USA | 4016.99.05.00 |
20.9% | IEEPA + Section 301 apply |
| 🇨🇳 China | 4016.99.05.00 |
~3-5% | Standard MFN rate |
| 🇪🇺 EU | 4016.99.00 |
~5.6% | CE Marking if used as safety equipment |
| 🇬🇧 UK | 4016.99.00 |
~5.6% | Post-Brexit rules apply |
| 🇦🇺 Australia | 4016.99.00 |
~5% | No additional tariffs |
📌 Conclusion:
- The USA is the most expensive market due to aggressive tariff policies.
- Classifying under Chapter 40 (Rubber) is the most cost-effective strategy for silicone candle molds.
📌 VI. Common Mistakes & Pitfalls (Learn from Others' Losses)
❌ Mistake 1: Using "Plastic Mold" as the description for a Silicone product.
👉 Consequence: CBP may reclassify to Chapter 84 if they deem it a "mold," leading to 38.1% tax.
❌ Mistake 2: Claiming "De Minimis" exemption for shipments under $800.
👉 Consequence: Denied. China-origin goods under Section 301/IEEPA are excluded. Full taxes apply.
❌ Mistake 3: Ignoring the material distinction (Plastic vs. Rubber).
👉 Consequence: Underreporting duty by using 3926 when it should be 4016, or vice versa, leading to audits and penalties.
✅ Correct Approach:
"Silicone Candle Mold, 100% Food-Grade Platinum Cure Silicone Rubber, Flexible, Reusable."
HS Code:4016.99.05.00
🎯 VII. Conclusion: Precision Classification Saves Money
🎯 Remember the Mantra:
🔹 "Silicone = Rubber (Ch 40), Not Plastic (Ch 39), Definitely Not Machinery (Ch 84)."
🔹 "20.9% vs 38.1% — The choice is yours!"
🔹 "No De Minimis for China — Plan your logistics accordingly!"
📌 Pro Tip:
If you are importing large volumes, request a Binding Ruling from U.S. CBP specifying the classification under 4016.99.05.00. This provides legal certainty and protects against future audits.
📣 Immediate Action Steps:
📞 Consult a licensed customs broker.
📄 Provide material specs (MSDS) to support Chapter 40 classification.
💰 Calculate landed cost using 20.9% (best case) vs. 38.1% (worst case).
✨ Professional Clearance Starts with Accurate Classification!
💼 Your profit margin depends on getting the HS Code right!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。