Car Body Decorative Clips
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926906520 | 14.2% | CN | US | 官方文档 |
| 7318210090 | 90.8% | CN | US | 官方文档 |
| 3926908500 | 24.0% | CN | US | 官方文档 |
| 7318220000 | 85.0% | CN | US | 官方文档 |
| 8302416080 | 88.9% | CN | US | 官方文档 |
商品图片
AI分析
🚗 Car Body Decorative Clips
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional通关 Strategy
📌 I. Product Definition and Classification: Do You Really Understand "Car Body Clips"?
Car body decorative clips are small fasteners used to secure interior/exterior trim panels, emblems, moldings, and decorative accessories to vehicle body structures. In international trade, they are generally categorized as fasteners or accessories, with their HS Code classification heavily dependent on material composition and specific form.
⚠️ Key Distinction Point:
- If made of Plastic: Classified under Chapter 39 (Plastics and Articles Thereof)
- If made of Iron/Steel: Classified under Chapter 73 (Articles of Iron or Steel)
- If made of Base Metal (Non-Ferrous): Classified under Chapter 83 (Base Metal Miscellaneous Articles)
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, there are 5 potential HS Codes for "Car Body Decorative Clips," reflecting different material assumptions and customs interpretations.
| HS Code | Product Description | Material Assumption | Applicability Scenario |
|---|---|---|---|
3926.90.65.20 |
Other articles of plastics: Parts of machines/apparatus | Plastic | Plastic push-fit clips, non-specified material, default plastic assumption |
7318.21.00.90 |
Screws, bolts, nuts, coach screws, etc., of iron or steel | Steel/Iron | Steel-based clips, washers, or locking fasteners |
3926.90.85.00 |
Other articles of plastics: Clamping fasteners | Plastic | Plastic clips explicitly categorized as "clamping fasteners" |
7318.22.00.00 |
Washers and similar articles, of iron or steel | Steel/Iron | Steel washers, lock nuts, or similar locking devices |
8302.41.60.80 |
Base metal mountings, fittings, and similar articles, of base metal | Base Metal | Metal clips for vehicle installation/accessories, not specific to doors/windows |
🔍 Critical Note:
- The material is the decisive factor. If the supplier cannot confirm the material, customs may default to the most common material or impose the highest tariff.
- Plastic clips generally have lower tariffs (14.2%–24.0%), while Metal clips face significantly higher tariffs (85.0%–90.8%) due to Section 301 and IEEPA surcharges.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: From November 10, 2025 (including subsequent imports)
🎯 1. 3926.90.65.20 – Plastic Clips (General Parts)
| Item | Content |
|---|---|
| Base Tariff | 4.2% (ad valorem) |
| Section 301 Surcharge | +10% (122 Clause Tariff) |
| Total Rate | 14.2% |
| Tax Calculation | CIF Value × 14.2% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis | Base: 4.2% + 122 Clause: 10% |
📌 Explanation:
- This is the most favorable rate for plastic clips.
- No additional Section 301 25% surcharge applies here, only the 10% "122 Clause" tariff.
🎯 2. 7318.21.00.90 – Steel Fasteners (Screws/Bolts/Nuts)
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| Section 301 Surcharge | +25% |
| 122 Clause Tariff | +10% |
| Steel/Aluminum/Copper Additional Surcharge | +50% |
| Total Rate | 90.8% |
| Tax Calculation | CIF Value × 90.8% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | Base: 5.8% + 301: 25% + 122: 10% + Steel Add-on: 50% |
📌 Warning:
- This is an extremely high tariff.
- The 50% surcharge is specifically for steel/aluminum/copper products under recent trade policies.
- Avoid this code unless absolutely necessary; it can destroy profit margins.
🎯 3. 3926.90.85.00 – Plastic Clamping Fasteners
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| Section 301 Surcharge | +7.5% |
| 122 Clause Tariff | +10% |
| Total Rate | 24.0% |
| Tax Calculation | CIF Value × 24.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | Base: 6.5% + 301: 7.5% + 122: 10% |
📌 Note:
- Slightly higher than3926.90.65.20but still significantly lower than metal codes.
- Applicable if the clip is explicitly designed as a "clamping fastener."
🎯 4. 7318.22.00.00 – Steel Washers/Locking Devices
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +25% |
| 122 Clause Tariff | +10% |
| Steel/Aluminum/Copper Additional Surcharge | +50% |
| Total Rate | 85.0% |
| Tax Calculation | CIF Value × 85.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | Base: 0.0% + 301: 25% + 122: 10% + Steel Add-on: 50% |
📌 Warning:
- Even with a 0% base tariff, the 50% steel surcharge makes this code prohibitively expensive.
🎯 5. 8302.41.60.80 – Base Metal Fittings/Mountings
| Item | Content |
|---|---|
| Base Tariff | 3.9% |
| Section 301 Surcharge | +25% |
| 122 Clause Tariff | +10% |
| Steel/Aluminum/Copper Additional Surcharge | +50% |
| Total Rate | 88.9% |
| Tax Calculation | CIF Value × 88.9% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | Base: 3.9% + 301: 25% + 122: 10% + Metal Add-on: 50% |
📌 Note:
- Similar to other metal codes, the 50% surcharge for base metal products drives the total rate to ~89%.
- Applies to car body clips made of zinc, aluminum, or other base metals used for mounting/decorative purposes.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Documentation Checklist (Mandatory)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state Material (Plastic/Steel/Base Metal), Dimensions, Quantity |
| ✅ Product Photos | ✔️ | Clear images showing the clip’s structure, packaging, and any material markings |
| ✅ Commercial Invoice | ✔️ | Must explicitly state "Car Body Decorative Clips" and Material |
| ✅ Packing List | ✔️ | Detail contents to avoid "unknown items" flags |
| ✅ Origin Certificate (CO) | ✔️ | If from non-China origin, may qualify for lower tariffs |
📌 Critical Tip:
- Never write "Miscellaneous Fasteners" or "Other Parts" on the invoice.
- Always specify "Plastic Car Body Clips" or "Steel Car Body Clips" to match the HS Code.
✅ 2. Declaration Strategy (Key Mnemonic)
🔥 "Plastic Low, Metal High, Material Clear, Tariff Decline!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Plastic Clips | 3926.90.65.20 or 3926.90.85.00 |
Misdeclare as Metal → 85%+ |
| Steel Clips | 7318.21.00.90 or 7318.22.00.00 |
Misdeclare as Plastic → 14% (Risk of Penalty) |
| Mixed Materials | Separate Declaration | Mixed in one HS Code → Customs Rejection |
| Unspecified Material | Default to Plastic | Guessing → High Tariff Risk |
✅ 3. Special Case Handling
| Situation | Recommendation |
|---|---|
| OEM Custom Clips | Provide customer order + design drawings to prove material |
| Plastic with Metal Core | Declare based on main component or seek pre-ruling |
| Bulk Import vs. Sample | Both are subject to duties; no de minimis exemption for China-origin goods |
| Recycled Plastic Clips | Same HS Code, but ensure documentation confirms material type |
🌍 V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Required | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.65.20 (Plastic) |
14.2% | FCC (if electronic), RoHS | Metal clips face 85%+ |
| 🇺🇸 USA | 7318.21.00.90 (Steel) |
90.8% | – | Avoid if possible |
| 🇨🇳 China | 3926.90.65.20 |
5%~8% | CCC (if applicable) | No Section 301 |
| 🇪🇺 EU | 3926.90.85.00 |
0%~2% | CE, REACH | Low tariffs for plastics |
| 🇦🇺 Australia | 3926.90.65.20 |
5% | – | Standard MFN rate |
📌 Conclusion:
- The USA imposes punitive tariffs on Chinese-manufactured fasteners, especially metals.
- Plastic clips are the most cost-effective for US export.
- Consider sourcing plastic clips from Vietnam/Mexico to bypass US tariffs if volume is high.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Declaring "Car Body Clips" without specifying material
👉 Consequence: Customs assigns highest applicable code (Metal, 85%+)
❌ Mistake 2: Using HS Code 7318 for plastic clips
👉 Consequence: Incorrect classification → Delay + Potential Penalty
❌ Mistake 3: Mixing steel and plastic clips in one shipment under one HS Code
👉 Consequence: Customs rejection → Separate declaration required → Increased costs
❌ Mistake 4: Assuming de minimis exemption applies
👉 Consequence: All China-origin goods > $800 are not exempt from additional tariffs
✅ Correct Practice:
"Plastic Car Body Decorative Clips, Model XYZ, Material: ABS Plastic, 1000 pcs, FOB Shanghai"
🎯 VII. Conclusion: Precise Classification, Cost Savings, Smooth Clearance!
🎯 Remember the Mnemonic:
🔹 "Plastic 14%, Metal 90%, Material Matters, Don’t Guess!"
🔹 "HS Code is King, Tariff Difference is Life, Wrong Code = Lost Profit!"
📌 Pro Tip:
If your car body clips are manufactured in Vietnam, Mexico, or Thailand, you may apply for IEEPA Exemption, reducing tariffs to 0%~5%.
It is highly recommended to apply for a Pre-Ruling (Advance Ruling) from US Customs to confirm the HS Code and tariff rate before shipping.
📣 Immediate Action:
📞 Contact Professional Customs Broker + Provide Product Photos + Apply for HS Code Pre-Ruling
🚀 Ensure Your Car Body Clips Clear Customs Smoothly, Export Efficiently, Maximize Profits!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Penny of Your Cost Deserves Precision!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。