Car Front Lip
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 8708106050 | 87.5% | CN | US | 官方文档 |
| 8708103010 | 0.0% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
| 3926301000 | 24.0% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 7326908610 | 87.9% | CN | US | 官方文档 |
商品图片
AI分析
🚗 Car Front Lip (Automotive Body Parts)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy 📌 1. Product Definition: What is a "Car Front Lip"?
A Car Front Lip (also known as a front splitter or bumper lip) is an aerodynamic add-on attached to the lower edge of a vehicle's front bumper. Its primary function is to reduce lift and increase downforce.
In international trade, classification depends strictly on material and specific function: * Metal/Steel Parts: If made of stamped steel or aluminum, they are classified under automotive parts. * Plastic/Composite Parts: If made of plastic, fiberglass, or carbon fiber, they are classified under plastics or general steel articles depending on the composite structure.
⚠️ Critical Distinction Point: - If it is a metal stamping/component (e.g., steel lip) → Go to Chapter 87 (Vehicles). - If it is a plastic fitting → Go to Chapter 39 (Plastics). - If it is a general steel article not specifically identified as a vehicle part in Chapter 87 → Go to Chapter 73 (Iron/Steel).
📦 2. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the provided data, here are the specific HS Codes relevant to "Car Front Lip" depending on material composition:
| HS Code | Product Description | Application Scenario | Material |
|---|---|---|---|
| 8708.10.60.50 | Parts and accessories of motor vehicles; Bumpers and parts thereof; Parts of bumpers: Other | Standard metal (steel/aluminum) front lips, stamped or formed metal components | ✅ Steel/Aluminum |
| 8708.10.30.10 | Parts and accessories of motor vehicles; Bumpers and parts thereof; Bumpers Stampings: Other | Metal bumper stampings or lip components that are specifically stamped sheet metal | ✅ Steel/Aluminum |
| 3926.30.50.00 | Articles of plastics; Fittings for furniture, coachwork or the like: Other | Plastic, fiberglass, or carbon-fiber front lips that are not considered "handles/knobs" | ✅ Plastic/Composite |
| 3926.30.10.00 | Articles of plastics; Fittings for furniture, coachwork or the like; Handles and knobs | Note: Generally NOT for front lips unless it's a small plastic trim piece. Front lips are usually "Other" fittings. | ✅ Plastic |
| 7326.90.86.88 | Other articles of iron or steel; Other; Other; Other | Generic steel parts if not clearly identified as a specific automotive bumper part in Ch 87 | ✅ Steel (General) |
| 7326.90.86.10 | Other articles of iron or steel; Other; Other; Other; Laminated goods... | Steel lip with adhesive/core (rare for standard lips) | ✅ Steel Composite |
🔍 Key Reminder: - Most aftermarket carbon fiber/plastic lips fall under 3926.30.50.00 as "Fittings for coachwork." - Most metal lips (steel/aluminum) fall under 8708.10.60.50 or 8708.10.30.10 as "Parts of bumpers." - If declared incorrectly as a "General Steel Article" (7326) instead of an "Auto Part" (8708), you may face misclassification penalties.
💰 3. 2026 Latest Tariff Rate Breakdown (Including Surtaxes)
✅ Applicable Country: United States (US) ✅ Origin: China (CN) ✅ Effective Date: 2025/2026 (Current Trade Environment)
🎯 1. 8708.10.60.50 & 8708.10.30.10 —— Metal Car Front Lips (Steel/Aluminum)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Surcharge | +50.0% (Steel, Aluminum, Copper Products Surtax) |
| Section 301 / IEEPA | See Note Below |
| Total Tariff | 50.0% |
| Tax Calculation | CIF Value × 50% |
| De Minimis Exemption | ❌ Not Applicable (High value goods) |
| Legal Path | USITC:8708.10.60.50 → Steel/Al Surtax: 50% |
📌 Explanation: - The base tariff for auto parts is often 0%, BUT the 50% surcharge for Steel/Aluminum products applies heavily here. - Even if the base is 0%, the 50% steel/aluminum surcharge makes this a high-cost category. - Warning: If the lip is primarily steel, the 50% surcharge is mandatory. Do not assume "Auto Parts" means low tax.
🎯 2. 3926.30.50.00 —— Plastic/Composite Car Front Lips
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Surcharge | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value × 0% |
| De Minimis Exemption | ✅ Possible for low-value shipments (under $800) |
| Legal Path | USITC:3926.30.50.00 |
📌 Explanation: - Plastic coachwork fittings currently have 0% tariff. - This is a major cost-saving opportunity. If your front lip is made of plastic, fiberglass, or carbon fiber (non-metal), ensure it is classified under 3926.30.50.00 ("Other") rather than mistakenly under metal codes. - Note: Carbon fiber is often classified under plastics (3926) or other materials, benefiting from the 0% rate.
🎯 3. 7326.90.86.88 & 7326.90.86.10 —— Generic Steel Articles (If Misclassified)
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Surcharge | +25.0% |
| Steel/Al Surtax | +50.0% |
| Total Tariff | 77.9% |
| Tax Calculation | CIF Value × 77.9% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Path | USITC:7326.90.86.88 → Base 2.9% + Sec301 25% + Steel Surtax 50% |
📌 Explanation: - If you declare a steel front lip as a "General Steel Article" instead of an "Auto Part," you hit the worst-case scenario. - 77.9% total tax is catastrophic for margins. - Avoid this: Always use 8708 codes for vehicle-specific parts if possible.
🛠️ 4. Customs Clearance Practical Advice (Battle-Tested Tips)
✅ 1. Preparation Checklist (Non-Negotiable)
| Document | Required? | Explanation |
|---|---|---|
| ✅ Product Spec Sheet | ✔️ | Must state material (Plastic vs. Steel vs. Carbon Fiber). |
| ✅ Material Declaration | ✔️ | Crucial for determining 0% vs. 50% tax. |
| ✅ Commercial Invoice | ✔️ | Must say "Car Front Lip/Bumper Splitter," NOT "Metal Plate." |
| ✅ HS Code Confirmation | ✔️ | Verify if it's Ch 39 (Plastic) or Ch 87 (Auto Part). |
| ✅ Photos (Stamped/Marked) | ✔️ | Show part number and material markings. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 "Plastic is Zero, Metal is Fifty, Don't Be Lazy with Class!"
| Scenario | Correct HS Code | Tax Rate | Risk Level |
|---|---|---|---|
| Plastic/Fiberglass/Carbon Lip | 3926.30.50.00 |
0.0% | ✅ Low (Best Option) |
| Steel/Aluminum Lip | 8708.10.60.50 |
50.0% | ⚠️ Medium (High Cost) |
| Generic Steel Plate | 7326.90.86.88 |
77.9% | ❌ High (Avoid!) |
✅ 3. Special Cases
| Situation | Handling Advice |
|---|---|
| Carbon Fiber Lips | Declare as Plastic/Composite (3926.30.50.00) to get 0% tax. Do not declare as "Metal." |
| Aluminum Lips | Subject to 50% surcharge under 8708.10.60.50. No way around it if it's metal. |
| Multi-Material Lips | If >50% value is plastic, argue for Ch 39. If metal structure dominates, use Ch 87. |
| Kit with Bumper | If sold with a full bumper, the whole kit may be classified under 8708.10 or 8708.29. |
🌍 5. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 3926.30.50.00 (Plastic) |
0% | Best for plastic/carbon lips |
| 🇺🇸 USA | 8708.10.60.50 (Metal) |
50% | High cost for steel/aluminum |
| 🇪🇺 EU | 8708.99 (Auto Parts) |
0-4.5% | Lower surcharges than US |
| 🇨🇳 China | 8708.99 (Auto Parts) |
0-5% | Domestic imports low tax |
📌 Conclusion: - US Market: The material is everything. Plastic/Carbon = 0% Tax. Metal = 50% Tax. - Strategy: If you are importing from China, prioritize plastic/carbon fiber front lips to avoid the 50% steel/aluminum surcharge. - Never declare metal parts as "general steel articles" (7326) — the 77.9% tax is a trap.
📌 6. Common Errors & Pitfalls (Learn from Others' Mistakes)
❌ Mistake 1: Declaring a Plastic Lip as 8708.10 (Auto Part)
👉 Consequence: Unnecessary complexity, potential for higher scrutiny. Stick to 3926.30.50.00 for 0% tax.
❌ Mistake 2: Declaring a Steel Lip as 3926.30.50.00 (Plastic)
👉 Consequence: Customs Fraud/Smuggling Charge. Steel is not plastic. You will pay 50% + Penalties + Back Taxes.
❌ Mistake 3: Using generic description "Metal Car Part"
👉 Consequence: Customs will default to 7326 (General Steel) → 77.9% Tax.
✅ Fix: Use precise description: "Steel Front Bumper Lip, Part No. XYZ, for Model ABC."
✅ Correct Practice:
"Carbon Fiber Front Lip Splitter, Non-Metal, Part No. CF-2024, Fits BMW F30" → HS 3926.30.50.00 | 0% Tax "Steel Front Bumper Lip, Stamped Steel, Part No. SL-2024, Fits Toyota Camry" → HS 8708.10.60.50 | 50% Tax
🎯 7. Conclusion: Smart Classification Saves 50%
🎯 Remember the Mantra:
🔹 "Plastic/Carbon is Free, Steel is Half, Don't Be Cheap, Be Smart!" 🔹 "HS Code is King, Tax Rate is Queen, Misclassification is the Enemy!"
📌 Pro Tip:
If your front lip contains both metal and plastic components, consult a customs broker to determine the "Essential Character." Often, if the plastic is the primary visual/material component, you may still argue for 3926.30.50.00.
📣 Immediate Action:
📞 Confirm Material Composition with your supplier. 📦 Choose Plastic/Carbon if possible for US imports to save 50%. 🚀 Clear Customs Smoothly, Maximize Profit!
✨ Professional Clearance Starts with Accurate Classification! 💼 Your Margin Depends on Your HS Code!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。