Car Sticker Label
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 7326901000 | 85.0% | CN | US | 官方文档 |
| 3919102055 | 40.8% | CN | US | 官方文档 |
| 3919905060 | 40.8% | CN | US | 官方文档 |
| 8310000000 | 35.0% | CN | US | 官方文档 |
商品图片
AI分析
🚗 Car Sticker Label (Vehicle Badges & Emblems)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
📌 I. Product Definition & Classification: Do You Really Know "Car Sticker Labels"?
Car sticker labels, also known as vehicle badges, emblems, or nameplates, are critical branding and identification components in the automotive industry. In international trade, they are classified based on their primary material and construction method. They are not a single commodity but are split between metallic goods and plastic/adhesive goods.
Metallic Badges (Iron/Steel/Non-Ferrous): Rigid, often chrome-plated or painted metal pieces used for traditional branding.
Plastic/Composite Badges: Flexible, self-adhesive, or polymer-based labels, often used for modern, lightweight, or cost-effective branding.
⚠️ Key Distinction Point:
- If the item is primarily metal (iron, steel, aluminum, copper, or other base metals) → It falls under Chapter 73 (Iron/Steel) or Chapter 83 (Base Metal Articles).
- If the item is primarily plastic with adhesive backing → It falls under Chapter 39 (Plastics).
- Crucial: The presence of an adhesive backing does not automatically make it a plastic good; if the substrate is metal, it remains a metal article.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material Composition |
|---|---|---|---|
7326.90.86.88 |
Other articles of iron or steel (Metal substrate, non-coated or painted) | Traditional chrome badges, steel nameplates, rigid metal emblems | ✅ Iron/Steel Base |
7326.90.10.00 |
Other articles of iron or steel (With metal coating or plating) | Chrome-plated badges, galvanized steel labels, coated metal emblems | ✅ Iron/Steel Base + Metal Coating |
3919.10.20.55 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes of plastics (Specialized automotive) | Plastic/emulsion-based adhesive labels, composite self-adhesive badges | ✅ Plastic Base + Adhesive |
3919.90.50.60 |
Other self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes of plastics (General plastic) | General plastic self-adhesive car stickers, non-specialized plastic badges | ✅ Plastic Base + Adhesive |
8310.00.00.00 |
Signplates, nameplates, address plates, number plates and similar plates, of base metal (General base metal) | Base metal signs, emblems, nameplates (often used for broader metal classifications) | ✅ Base Metal (Any) |
🔍 Key Reminder:
- Metallic Substrate is King: Even if a badge has a small amount of plastic coating or adhesive, if the structural material is iron/steel, it is generally classified under 7326.
- Adhesive vs. Material: Self-adhesive plastic labels (3919) are significantly cheaper in tariffs than metal badges. However, you cannot misdeclare a metal badge as plastic.
- 8310 vs. 7326:8310is for general base metal signs. If the item is specifically iron/steel (not copper, aluminum, etc.),7326is often more precise, but8310may apply if the manufacturing process fits "signplate" definition broadly.
💰 III. 2026 Latest Tariff Rate Details (Including Additional Duties, Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (Including subsequent imports)
🎯 1. 7326.90.86.88 & 7326.90.10.00 —— Iron/Steel Car Badges
| Item | Content |
|---|---|
| Base Tariff | 2.9% (for 7326.90.86.88) / 0.0% (for 7326.90.10.00) |
| Section 301 Tariff | +25% (Standard additional duty on Chinese goods) |
| Section 122 Tariff | +10% (Specific surcharge for steel, aluminum, and copper products) |
| Section 232 Tariff | +50% (Tariff on Steel, Aluminum, and Copper articles) |
| Total Tax Rate | 87.9% (for 7326.90.86.88) 85.0% (for 7326.90.10.00) |
| Tax Calculation | CIF Value × Total Rate |
| De Minimis Exemption? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | USITC:7326.90.86.88 → Footnote:122 → Footnote:232 → USITC:7326.90.10.00 → Footnote:301 |
📌 Explanation:
- 87.9% / 85.0%: This is an extremely high tariff. It combines the base duty with Section 301 (25%), Section 122 (10%), and Section 232 (50%).
- Section 232 (50%) is the heavy hitter here, targeting steel and aluminum products heavily.
- Section 122 (10%) adds an additional layer for specific steel/aluminum/copper articles.
- Section 301 (25%) is the standard punitive tariff on Chinese goods.
- Conclusion: Importing metal car badges from China to the US is prohibitively expensive.
🎯 2. 3919.10.20.55 & 3919.90.50.60 —— Plastic/Composite Self-Adhesive Labels
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| Section 301 Tariff | +25% |
| Section 122 Tariff | +10% |
| Total Tax Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | USITC:3919.10.20.55 / 3919.90.50.60 → Footnote:301 → Footnote:122 |
📌 Explanation:
- 40.8%: While still high, this is less than half of the metal tariff.
- No Section 232 (50%): Since plastics are not steel/aluminum, the massive 50% surcharge does not apply.
- Section 122 (10%): Still applies due to specific provisions for certain imports, but the burden is lighter.
- Note: If the plastic badge is considered "specialized" (3919.10.20.55), the rate is the same as general plastic (3919.90.50.60).
🎯 3. 8310.00.00.00 —— Base Metal Signplates/Nameplates
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Tariff | +25% |
| Section 122 Tariff | +10% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | USITC:8310.00.00.00 → Footnote:301 → Footnote:122 |
📌 Explanation:
- 35.0%: This is the lowest tariff among all metal options.
- Why so low? HS Code8310is a general category for base metal signs. It may not trigger the Section 232 (50%) steel tariff if the specific metal (e.g., zinc, brass, or non-structural steel) is classified here rather than under Chapter 73.
- Risk: Customs may challenge this classification if the item is clearly a "steel article" (7326). However, if it fits the definition of a "nameplate" or "signplate" of base metal, this code offers significant savings.
🛠️ IV. Clearance Practical Advice (Battlefield Pitfall Avoidance Guide)
✅ 1. Document Preparation Checklist (Non-negotiable)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Detailed material composition (e.g., "Polypropylene adhesive label" vs. "Stainless Steel emblem") |
| ✅ Material Declaration | ✔️ | Explicitly state "Plastic" or "Metal" and percentage. Crucial for avoiding 7326 vs 3919 disputes. |
| ✅ Product Photos (Clear) | ✔️ | Show texture, thickness, and adhesive backing. Distinguish between rigid metal and flexible plastic. |
| ✅ Commercial Invoice | ✔️ | Use precise terms: "Self-adhesive Plastic Badge" or "Metal Nameplate". Avoid vague "Car Sticker". |
| ✅ Packing List | ✔️ | Confirm quantity and weight. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 “Material is Truth, Adhesive Doesn’t Override! Plastic is Cheap, Metal is Pain!”
| Scenario | Correct Declaration | Wrong Practice | Result |
|---|---|---|---|
| Plastic Self-Adhesive Badge | 3919.10.20.55 or 3919.90.50.60 |
Declared as "Car Badge" (vague) | Risk of reclassification to metal → 40%+ |
| Metal Badge (Steel) | 7326.90.86.88 |
Declared as "Plastic Sticker" | Fraud/Seizure + High Penalties |
| Metal Badge (General Base Metal) | 8310.00.00.00 |
Declared as 7326 |
Savings: 35% vs 87.9% |
| Chrome-Plated Metal Badge | 7326.90.10.00 |
Declared as 8310 |
Risk of challenge if plating is thick/structural |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Badges | Provide customer design specs. If material is mixed (e.g., metal with plastic paint), declare based on essential character. |
| Self-Adhesive Metal Foil | If the metal is extremely thin (foil) and adhesive is integral, argue for 3919 (Plastic with metal layer) if possible, but customs may reject. 7326 is safer. |
| Small Quantity Samples | Even for samples, the tariff applies. De minimis does not apply to Chinese goods under Section 301/122/232. |
| Third-Country Transshipment | Do not ship from China to Vietnam/Malaysia and re-export to US. "China Origin" rules still apply. Customs will trace origin. |
🌍 V. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3919.90.50.60 (Plastic) 8310.00.00.00 (Metal) |
40.8% (Plastic) 35.0% (Metal 8310) 87.9% (Metal 7326) |
No specific cert needed for labels | Avoid 7326 at all costs. |
| 🇨🇳 China | 3919.90.50.60 |
5% | No special cert | Low export tariff. |
| 🇪🇺 EU | 3919.90.90 (Plastic) |
4.5% | CE (if applicable) | Standard MFN rate. |
| 🇦🇺 Australia | 3919.90.00 |
5% | No special cert | Standard rate. |
| 🇯🇵 Japan | 3919.90.90 |
3.8% | No special cert | Standard rate. |
📌 Conclusion:
- USA is the only market with punitive tariffs.
- Plastic badges (3919) are 40.8% cheaper than steel badges (7326) in the US.
- Base metal nameplates (8310) offer a 35% rate, a significant saving over steel-specific codes.
📌 VI. Common Errors & Pitfall Guide (Blood & Tears Lessons)
❌ Error 1: Declaring a Steel Badge as "Plastic Sticker" to avoid 87.9%
👉 Consequence: Customs inspection reveals metal content. Seizure, fines, and 87.9% back-tariff + legal fees.
❌ Error 2: Using vague term "Car Sticker" without material specification
👉 Consequence: Customs assigns the highest possible rate (likely 7326) as a precaution. You pay 87.9% for a plastic item.
❌ Error 3: Assuming "Self-Adhesive" means "Plastic"
👉 Consequence: Metal foil with adhesive is still a metal article. Do not use 3919 for metal foil.
❌ Error 4: Ignoring Section 122 & 232 on Metal
👉 Consequence: You calculate only 25% (Section 301). Total is actually 87.9%. Underpayment penalty.
✅ Correct Practice:
- For Plastic: "Self-Adhesive Plastic Badge, PP Material, For Automotive Use, HS 3919.90.50.60"
- For Metal (General): "Base Metal Nameplate, Zinc Alloy, For Automotive Use, HS 8310.00.00.00"
- For Metal (Steel): "Iron or Steel Emblem, Chrome Plated, HS 7326.90.10.00"
🎯 VII. Conclusion: Professional Declaration, Cost Saving!
🎯 Key Takeaway:
🔹 "Plastic is Better: 40.8% vs 87.9%."
🔹 "Metal Choice Matters:8310(35%) beats7326(87.9%)."
🔹 "Never Lie About Material: Customs Will Find Out."
📌 Pro Tip:
If your product is plastic-based, ensure it is clearly described as "Self-Adhesive Plastic Badge" in all documents. If it is metal, consider if it can be classified under 8310 (Base Metal Nameplate) rather than 7326 (Iron/Steel Articles) to save 52.9% in tariffs. Always verify with a customs broker before shipment.
📣 Immediate Action:
📞 Consult a Customs Broker + Provide Material Sample + Apply for Advance Ruling if high volume
🚀 Save Money, Clear Goods, Maximize Profit!
✨ Professional Clearance Starts with Precise Classification!
💼 Your Cost is Precision. Your Profit is Compliance.
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。