Cocktail Shaker
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7323930060 | 62.0% | CN | US | 官方文档 |
| 7323999030 | 88.4% | CN | US | 官方文档 |
| 6911104100 | 16.3% | CN | US | 官方文档 |
| 6911108010 | 38.3% | CN | US | 官方文档 |
| 7615109100 | 70.6% | CN | US | 官方文档 |
| 7615107180 | 63.1% | CN | US | 官方文档 |
商品图片
AI分析
🍸 Cocktail Shaker (Bar Tools & Accessories)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: Do You Really Know a "Cocktail Shaker"?
A Cocktail Shaker is a tool used to mix or blend ingredients of mixed drinks, such as whiskey or vodka, with juice, cream, or other ingredients. In international trade, classification depends heavily on the material (Porcelain/China vs. Aluminum/Steel) and the specific form (e.g., with attached lids, tumblers, etc.).
There are two distinct classification paths based on the provided data: 1. Porcelain/China Set: If the shaker is part of a set (like "Oil and vinegar sets" or "Tumblers") or made of fine china, it falls under Chapter 69. 2. Metal (Aluminum/Steel) Household Article: If the shaker is made of aluminum or steel, it falls under Chapter 76 or 73.
⚠️ Critical Distinction:
- If it is a standalone metal shaker, it is typically classified as "Other household articles" under metal headings.
- If it is part of a set involving porcelain items (e.g., matched with cups), it may fall under 6911.10.41.00.
- Food Contact Safety: Items suitable for food/drink contact often attract higher scrutiny and potentially higher duties if not specifically exempted.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Mapping)
Based on the provided <DATA>, here are the relevant HS Codes for items functionally equivalent to or related to cocktail shakers (table/kitchen/household articles):
| HS Code | Product Description | Material | Relevant for Cocktail Shakers? | Tax Rate (Total) |
|---|---|---|---|---|
6911.10.41.00 |
Tableware, kitchenware... of porcelain or china: Steins with permanently attached pewter lids, candy boxes, decanters, punch bowls... Oil and vinegar sets, tumblers and salt and pepper shaker sets | Porcelain/China | ✅ YES (If part of a porcelain set including shakers/tumblers) | 6.3% |
6911.10.80.10 |
Tableware, kitchenware... of porcelain or china: Other Suitable for food or drink contact | Porcelain/China | ⚠️ POTENTIALLY (If made of porcelain/ceramic and for food/drink) | 28.3% |
7615.10.91.00 |
Table, kitchen or other household articles... of aluminum: Other: Other | Aluminum | ✅ YES (Aluminum shaker) | 60.6% |
7615.10.71.80 |
Table, kitchen or other household articles... of aluminum: Cooking and kitchen ware... Other | Aluminum | ✅ YES (Aluminum kitchen ware/shaker) | 53.1% |
7323.93.00.60 |
Table, kitchen or other household articles... of iron or steel: Of stainless steel... Kitchen ware | Stainless Steel | ✅ YES (Stainless steel shaker) | 52.0% |
7323.99.90.30 |
Table, kitchen or other household articles... of iron or steel: Kitchen or tableware suitable for food or drink contact | Iron/Steel | ✅ YES (Steel shaker for food/drink) | 78.4% |
🔍 Key Insight:
- Porcelain/Ceramic Shakers: Best rate is 6.3% (6911.10.41.00) only if classified as part of specific sets (like punch bowls/tumblers). Otherwise, generic porcelain food-contact items hit 28.3%. - Metal Shakers: Face significant "Steel, Aluminum, Copper" surcharges. Rates range from 52.0% to 78.4%.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: 2025/2026 Trade Rules
🎯 1. Porcelain/Ceramic Shakers (6911.10.41.00 / 6911.10.80.10)
A. 6911.10.41.00 – Best Case for Porcelain Sets
| Item | Details |
|---|---|
| Basic Tariff | 6.3% |
| Additional Tariff | 0.0% |
| Total Tax | 6.3% |
| Tax Breakdown | Basic: 6.3% + Section 301/Add-on: 0% |
| Applicable To | Porcelain items like steins with pewter lids, punch bowls, tumblers, oil/vinegar sets. If your shaker is part of a matching porcelain set, this is the optimal code. |
B. 6911.10.80.10 – Generic Porcelain Food-Contact
| Item | Details |
|---|---|
| Basic Tariff | 20.8% |
| Additional Tariff | 7.5% |
| Total Tax | 28.3% |
| Applicable To | Other porcelain tableware/kitchenware suitable for food/drink contact not listed in the specific exempted categories above. |
🎯 2. Aluminum Shakers (7615.10.91.00 / 7615.10.71.80)
A. 7615.10.91.00 – Aluminum "Other Household Articles"
| Item | Details |
|---|---|
| Basic Tariff | 3.1% |
| Section 301/Add-on | 7.5% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tax | 60.6% |
| Legal Path | Basic: 3.1% → Add-on: 7.5% → Surcharge: 50% |
| Note | High tax due to specific metal surcharge policies. |
B. 7615.10.71.80 – Aluminum Cooking/Kitchen Ware (Not Enamelled)
| Item | Details |
|---|---|
| Basic Tariff | 3.1% |
| Section 301/Add-on | 0.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tax | 53.1% |
| Note | Slightly lower than "Other" category, but still subject to the harsh 50% metal surcharge. |
🎯 3. Stainless Steel/Steel Shakers (7323.93.00.60 / 7323.99.90.30)
A. 7323.93.00.60 – Stainless Steel Kitchen Ware
| Item | Details |
|---|---|
| Basic Tariff | 2.0% |
| Section 301/Add-on | 0.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tax | 52.0% |
| Note | Standard stainless steel kitchenware. |
B. 7323.99.90.30 – Steel/Tableware for Food/Drink Contact
| Item | Details |
|---|---|
| Basic Tariff | 3.4% |
| Section 301/Add-on | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Tax | 78.4% |
| Note | Highest Tax Bracket. Applies to steel items specifically noted as "Suitable for food or drink contact" under broader "Other" categories. |
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Preparation Checklist (Non-negotiable)
| Document | Required | Explanation |
|---|---|---|
| ✅ Product Spec Sheet | ✔️ | Must specify Material (Porcelain, Aluminum, Stainless Steel). This is the #1 determinant for HS Code. |
| ✅ Photos (Clear & Detailed) | ✔️ | Show the shaker, any attached parts (e.g., pewter lid), and packaging. |
| ✅ Commercial Invoice | ✔️ | Must accurately describe the item. Avoid vague terms like "Bar Tool." Use "Porcelain Cocktail Shaker Set" or "Stainless Steel Shaker." |
| ✅ Food Contact Compliance | ✔️ | FDA compliance certificates for food-contact surfaces (especially for steel/aluminum). |
| ✅ HS Code Justification | ✔️ | Document why the code was chosen (e.g., "Classified as 6911.10.41.00 because it is a porcelain tumbler/shaker set"). |
✅ 2. Classification Strategy (Key Mantra)
🔥 "Material First, Function Second. Metal Gets Punished, Porcelain Gets Protected (if specific)."
| Scenario | Recommended HS Code | Tax Rate | Why? |
|---|---|---|---|
| Porcelain Shaker (Set) | 6911.10.41.00 |
6.3% | Lowest tax. Only if it fits the specific list (tumblers, punch bowls, etc.). |
| Porcelain Shaker (Generic) | 6911.10.80.10 |
28.3% | Higher tax if it doesn't fit the specific exempted list. |
| Aluminum Shaker | 7615.10.71.80 |
53.1% | Subject to 50% metal surcharge. Avoid if possible due to high cost. |
| Stainless Steel Shaker | 7323.93.00.60 |
52.0% | Subject to 50% metal surcharge. |
| Steel Shaker (Generic Food Contact) | 7323.99.90.30 |
78.4% | Avoid. Highest tax rate due to combination of 301 duties and metal surcharge. |
✅ 3. Special Circumstances
| Situation | Advice |
|---|---|
| Mixed Material (e.g., Steel base, Ceramic top) | Classify based on the essential character or the component giving it its primary identity. Usually, if the ceramic part is the main visible/functional part, argue for Chapter 69. If steel is dominant, Chapter 73. |
| Shaker with Attached Pewter Lid | Explicitly mention "Pewter lid" in description. This may help qualify for 6911.10.41.00 if the base is porcelain. |
| Stainless Steel vs. Carbon Steel | Ensure the invoice says "Stainless Steel." Mislabeling can lead to audits and penalties. |
🌍 V. Global Market Clearance Comparison (2026 Update)
| Country | Recommended HS Code | Approx. Duty | Notes |
|---|---|---|---|
| 🇺🇸 USA | 6911.10.41.00 (Porcelain) / 7323.93.00.60 (Steel) |
6.3% (Porcelain) 52.0% (Steel) |
High Risk for Metals. Steel/Aluminum face 50% surcharge. Porcelain is much more favorable. |
| 🇨🇳 China | 6911.10 / 7323.93 |
~10-15% | Lower base rates, no Section 301 surcharges. |
| 🇪🇺 EU | 6911.10 / 7323.93 |
0-6% | No metal surcharges like the US. EU is more favorable for metal kitchenware. |
📌 Conclusion for US Market:
If exporting to the US, Porcelain/Ceramic Cocktail Shakers are significantly more tax-efficient (6.3%) compared to Metal ones (52-78%). Consider material substitution if tax burden is a concern.
📌 VI. Common Mistakes & Pitfall Guide
❌ Mistake 1: Labeling a Steel Shaker as "Porcelain" to avoid taxes.
👉 Consequence: Customs seizure, fines, and potential fraud charges.
👉 Fix: Be honest about material.
❌ Mistake 2: Using 7323.99.90.30 for Stainless Steel.
👉 Consequence: Paying 78.4% instead of 52.0%.
👉 Fix: Use 7323.93.00.60 for Stainless Steel specifically.
❌ Mistake 3: Assuming all "Cocktail Shakers" have one HS Code.
👉 Consequence: Misclassification leads to delays.
👉 Fix: Classify by material first.
✅ Correct Description Example:
"Porcelain Cocktail Shaker with Pewter Lid, Part of Bar Set, Food Safe, Model CS-001"
→ HS:6911.10.41.00(6.3%)
🎯 VII. Conclusion: Professional Declaration Saves Money!
🎯 Remember the Mantra:
🔹 "Porcelain is Cheap (6.3%), Steel is Expensive (52-78%)."
🔹 "Check for Pewter Lids! It unlocks the 6.3% rate for China."
🔹 "Don't mix Steel and Porcelain without clear justification."
📌 Pro Tip:
If you are manufacturing Aluminum or Steel shakers, calculate if the 50% metal surcharge makes your product uncompetitive in the US market. Consider Porcelain/Ceramic alternatives or exporting to EU/Asia where metal duties are lower.
📣 Immediate Action:
📞 Confirm your product's primary material.
📄 Check if it fits the specific list for6911.10.41.00(Steins/Punch Bowls/Tumblers).
🚀 Save 40-70% in duties by choosing the right HS Code!
✨ Professional Customs, Starting with Precise Classification!
💼 Your Cost Savings Are Just One HS Code Away!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。