Coreless Wood
CN → US商品图片
AI分析
🪵 Coreless Wood (Solid Wood Veneer Sheets / Veneer Peels)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
📌 I. Product Definition & Classification: Do You Truly Understand "Coreless Wood"?
"Coreless Wood" in international trade typically refers to Veneer Sheets, Veneer Peels, or Solid Wood Sheets that have been sliced, rotary-cut, or peeled from logs. These are thin layers of wood (usually 0.5mm–3mm thick) used as the surface layer for plywood, furniture, and decorative panels. Unlike "wood cores" or "blockboard," these products have no internal structural core; they are flat sheets of solid wood.
In international trade, they are broadly categorized into two types based on processing:
- Raw Veneer Peels: Simply peeled from logs, unsanded, unglued.
- Sliced/Planed Veneer Sheets: Sliced from logs, often sanded and trimmed, used directly for decorative purposes.
⚠️ Key Distinction Point:
- If the product is thin sheets of wood (<6mm thick), peeled or sliced from logs → Classified under Chapter 44, Heading 4408
- If the product is thick planks (>6mm), solid wood, not veneer → Classified under Chapter 44, Heading 4407 (Wood Sawn Lengthwise)
- If the product is Plywood (layers glued together) → Classified under Chapter 44, Heading 4412
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Thickness/Processing | Contains Glue? |
|---|---|---|---|---|
4408.10.00.00 |
Veneer sheets and sheets for plywood, sliced or peeled, whether or not sanded, but not mechanically worked further; wood veneer sheets consisting of sheets of wood united by layers, sliced or peeled, whether or not sanded | Decorative veneer, plywood manufacturing | <6mm | ❌ No (Raw) |
4408.31.00.00 |
Veneer sheets and sheets for plywood, of rosewood | High-end furniture, musical instruments | <6mm | ❌ No |
4408.39.00.00 |
Veneer sheets and sheets for plywood, of other tropical wood | Tropical wood veneers (Teak, Mahogany, etc.) | <6mm | ❌ No |
4408.90.00.00 |
Veneer sheets and sheets for plywood, of other wood | Common hardwoods (Oak, Walnut, Cherry, Birch) | <6mm | ❌ No |
4407.10.00.00 |
Wood sawn lengthwise, chipped or peeled, of oak, of a thickness exceeding 6 mm | Thick wood planks, not veneer | >6mm | N/A |
4412.10.00.00 |
Plywood, veneer panels and similar laminated wood, of a thickness not exceeding 6 mm | Plywood sheets (multiple layers glued) | Any | ✅ Yes |
🔍 Key Reminder:
- All "Coreless Wood" products that are thin (<6mm) must be classified under 4408.xx.xx, not 4407 or 4412.
- If the product is glued (even a single layer of wood glued to paper, known as "paper-backed veneer"), it may still fall under 4408 if it’s primarily wood. However, if it’s ** Plywood (multiple wood layers glued), it falls under 4412.
- Misclassification Risk**: Declaring "Coreless Wood" as "Plywood" (4412) when it’s single-layer veneer (4408) can lead to tariff discrepancies and customs penalties.
💰 III. 2026 Latest Tariff Rate Details (Including Supplementary Taxes, Policy Supplements)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 4408.10.00.00 / 4408.90.00.00 —— Veneer Sheets (Most Common for "Coreless Wood")
| Item | Content |
|---|---|
| Basic Tariff Rate | 0% (ad valorem) |
| USITC Supplementary Tariff | +25% (from USITC Footnote 9903.88.01, Section 301) |
| IEEPA Supplementary Tariff | +10% (for China/Hong Kong products, effective Nov 10, 2025) |
| Total Tariff Rate | 35% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Exemption Eligible | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:4408.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- "USITC Supplementary Tariff 25%" is part of the "Additional Duties" under Section 301 of the US Trade Act;
- "IEEPA 10%" is the additional duty on Chinese products under the International Emergency Economic Powers Act;
- Total 35%, which is a high tariff rate, must be anticipated in advance!
🎯 2. 4407.10.00.00 —— Wood Sawn Lengthwise (>6mm, if misclassified as "Coreless Wood" but actually thick planks)
| Item | Content |
|---|---|
| Basic Tariff Rate | 0% |
| USITC Supplementary Tariff | +25% |
| IEEPA Supplementary Tariff | +10% |
| Total Tariff Rate | 35% |
| Tax Calculation | CIF × 35% |
| De Minimis Exemption Eligible | ❌ No |
| Legal Basis Path | IEEPA:9901.25 → IEEPA:9903.01.24 → USITC:4407.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Note:
- Even if the product is "thick wood planks" rather than "thin veneer," if it’s of Chinese origin, it still faces the same 35% total tariff.
- "Coreless Wood" usually refers to thin sheets, so 4408 is the more common code.
🛠️ IV. Customs Clearance Practical Advice (Practical Pitfall Avoidance Guide)
✅ 1. Preparation Material Checklist (All Required)
| Material | Must Provide | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Including thickness, width, length, wood species (e.g., Oak, Birch), moisture content |
| ✅ Product Photos (Including Label) | ✔️ | Clear display of model, brand, wood grain, thickness gauge |
| ✅ Third-Party Inspection Report | ✔️ | Fumigation Certificate (ISPM 15), FSC Certification (if applicable), Formaldehyde Emission Test (E1/E0) |
| ✅ Commercial Invoice | ✔️ | Clearly state "Veneer Sheets" or "Wood Veneer," NOT "Plywood" or "Wood Planks" |
| ✅ Packing List | ✔️ | Specify net weight/gross weight, number of bundles, palletization method |
| ✅ Fumigation Certificate (ISPM 15) | ✔️ | Mandatory for solid wood products to prevent pest introduction |
| ✅ Certificate of Origin (CO) | ✔️ | If not from China, can apply for preferential tariff |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Thin Sheets Go to 4408, Thick Planks to 4407, Glued Layers to 4412! Name Accurately, Avoid Penalties!"
| Scenario | Correct Declaration Method | Wrong Practice |
|---|---|---|
| Thin wood sheets (<6mm), no glue | 4408.xx.xx (Veneer) |
Misdeclare as "Plywood" (4412) → 35% vs. 5% difference + risk |
| Thick wood planks (>6mm) | 4407.xx.xx (Sawn Wood) |
Misdeclare as "Veneer" → Underpayment of tax |
| Plywood (multiple layers glued) | 4412.xx.xx (Plywood) |
Misdeclare as "Veneer" → 35% vs. 5% difference |
| Paper-backed veneer | 4408.xx.xx |
Declare as "Paper Product" → Wrong chapter |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Veneer | Provide customer order + design drawings, avoid being labeled as "non-standard" |
| Veneer with Fumigation | Ensure ISPM 15 mark is visible on pallets/boxes; without it, goods may be rejected |
| High-Value Decorative Veneer (Rosewood, Mahogany) | Provide CITES Certificate if applicable (some tropical woods are protected) |
| Veneer for Furniture | Declare as "Veneer for Furniture Manufacturing," not "Finished Furniture" |
🌍 V. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4408.xx.xx |
35% (CN Origin) | ISPM 15 + FSC (Optional) | 35% is high due to 301 + IEEPA |
| 🇨🇳 China | 4408.xx.xx |
5% | Fumigation Certificate | No additional supplementary tax |
| 🇪🇺 EU | 4408.xx.xx |
0% (If FSC/EUTR Compliant) | EUTR (EU Timber Regulation) + FSC | No supplementary tax if legal origin proven |
| 🇦🇺 Australia | 4408.xx.xx |
5% | IPPC Mark | No supplementary tax |
| 🇯🇵 Japan | 4408.xx.xx |
0% | ISPM 15 | No supplementary tax |
📌 Conclusion:
- USA is the only market with high supplementary tariffs for "Coreless Wood" (Veneer);
- Chinese-origin veneer faces high clearance costs in the US, suggest evaluating supply chain adjustments or pre-clearance rulings.
📌 VI. Common Errors & Pitfall Avoidance Guide (Blood-Teaching Lessons)
❌ Error 1: Declaring "Veneer" as "Plywood"
👉 Consequence: Tariff difference may seem small, but customs may impose penalties for misdeclaration + delay in clearance.
❌ Error 2: Failing to provide ISPM 15 Fumigation Certificate
👉 Consequence: Goods detained or returned at destination customs due to pest risk.
❌ Error 3: Incorrectly stating "Wood Species"
👉 Consequence: If declared as "Hardwood" but is "Softwood," or vice versa, it may trigger higher tariffs or inspections.
❌ Error 4: Not distinguishing between "Veneer" (4408) and "Sawn Wood" (4407) based on thickness
👉 Consequence: If thickness is 7mm but declared as veneer, customs may reclassify and impose penalties.
✅ Correct Practice:
"Veneer Sheets, Birch Wood, 1.2mm Thickness, 1220x2440mm, FSC Certified, ISPM 15 Fumigated, Bundle Palletized"
🎯 VII. Conclusion: Professional Declaration Saves Time, Effort, and Cost!
🎯 Remember the Mantra:
🔹 "Thin Sheets to 4408, Thick to 4407, Glued to 4412!"
🔹 "Fumigation is Key, Species Accurate, US Tariff 35%!"
📌 Tips:
If your "Coreless Wood" originates from Vietnam, Malaysia, Indonesia, or Thailand, you may apply for IEEPA Exemption, tariff as low as 0%~5%;
Suggest pre-application for Advance Ruling to avoid clearance risks.
📣 Act Now:
📞 Contact Professional Customs Broker + Provide Product Photos + Apply for HS Code Advance Ruling
🚀 Let Your "Coreless Wood" Smoothly Clear Customs, Efficiently Export, Profit Double!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Cent of Your Cost Deserves Precise Calculation!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。