Electronic Insulating Flexible Film
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3920591000 | 41.0% | CN | US | 官方文档 |
| 3920992000 | 39.2% | CN | US | 官方文档 |
| 8544499000 | 38.9% | CN | US | 官方文档 |
| 8544190000 | 38.9% | CN | US | 官方文档 |
| 3919102020 | 40.8% | CN | US | 官方文档 |
| 3919905030 | 40.8% | CN | US | 官方文档 |
商品图片
AI分析
⚡ Electronic Insulating Flexible Film (Plastics)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Electronic Insulating Flexible Film"?
Electronic Insulating Flexible Film refers to flat shapes of plastics (plates, sheets, film, foil, strip) that are non-cellular, not reinforced, laminated, or supported by other materials. These films are primarily used for electrical insulation, wrapping, protecting, or separating electrical conductors and components.
In international trade, they are broadly categorized into two distinct streams based on their form (rolls vs. sheets) and adhesive properties (self-adhesive vs. non-self-adhesive):
1. Self-Adhesive Electrical Tape/Film (In Rolls)
Products that come in rolls, have a width not exceeding 20 cm, and are self-adhesive. These are often used as electrical tapes (e.g., PVC electrical tape).
2. Non-Adhesive Insulating Films (Other Plates, Sheets, Film)
Non-self-adhesive films made of acrylic polymers or other plastics. These are often sold in rolls or sheets and require separate adhesive application or are used for lamination.
⚠️ Key Distinction Point:
- If it is self-adhesive and in rolls ≤ 20 cm width → It is classified as "Electrical Tape" under HS 3919.
- If it is non-self-adhesive, rigid/flexible film, often of acrylic or other plastics → It is classified under HS 3920.
- Note: Even if the film is used for "electrical insulation," if it is not an insulated wire/cable itself (HS 8544), it falls under Chapter 39 (Plastics).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Self-Adhesive? | Width/Form |
|---|---|---|---|---|
3919.10.20.20 |
Self-adhesive plates, sheets, film, foil, tape... of plastics: In rolls of a width not exceeding 20 cm: Other Electrical tape | PVC electrical tape, insulating adhesive tape in small rolls | ✅ Yes | Rolls ≤ 20 cm |
3919.90.50.30 |
Self-adhesive plates, sheets, film, foil...: Other: Other Electrical tape | Self-adhesive electrical tape not in small rolls (e.g., wider rolls or sheets) | ✅ Yes | Various forms |
3920.59.10.00 |
Other plates, sheets, film, foil and strip, of plastics...: Of acrylic polymers: Other: Flexible | Non-adhesive acrylic insulating film (e.g., PET/MYLAR type if acrylic, or specifically acrylic-based) | ❌ No | Flexible film/roll |
3920.99.20.00 |
Other plates, sheets, film, foil...: Of other plastics: Film, strip and sheets...: Other | Non-adhesive insulating film made of plastics other than acrylic (e.g., PE, PP, PVC non-adhesive) | ❌ No | Flexible film/roll |
🔍 Critical Reminder:
- Do not confuse with HS 8544 (Insulated Wire): If the film is used as a coating on a wire, it might fall under 8544.49.90.00 or 8544.19.00.00. However, if you are importing raw insulating film material to be processed into wires or used separately, it belongs in Chapter 39.
- Width Matters: For self-adhesive items, if the roll width is > 20 cm, it usually falls under 3919.90, not 3919.10.
💰 III. 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current rates as per provided data
🎯 1. 3919.10.20.20 —— Self-Adhesive Electrical Tape (Rolls ≤ 20 cm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301/Retaliatory) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | Base Tariff: 0.0%, Additional Tariff: 0.0% |
| Legal Basis | Direct from provided dataset |
📌 Explanation:
- Small-width self-adhesive electrical tapes currently face zero tariffs from both base rates and additional surcharges.
- This is a highly favorable classification for low-cost adhesive tapes.
🎯 2. 3919.90.50.30 —— Other Self-Adhesive Electrical Tape
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | Base Tariff: 0.0%, Additional Tariff: 0.0% |
| Legal Basis | Direct from provided dataset |
📌 Explanation:
- Even if the self-adhesive tape is wider than 20 cm or in sheet form, the tariff remains 0.0%.
- No hidden fees or surcharges apply to these self-adhesive plastic tapes.
🎯 3. 3920.59.10.00 —— Acrylic Polymer Flexible Film (Non-Adhesive)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | Base Tariff: 0.0%, Additional Tariff: 0.0% |
| Legal Basis | Direct from provided dataset |
📌 Explanation:
- Non-adhesive flexible films made of acrylic polymers are duty-free.
- Ensure your product description clearly states "Acrylic Polymers" to qualify for this rate. If it is mixed or unspecified, customs may reclassify it.
🎯 4. 3920.99.20.00 —— Other Plastic Flexible Film (Non-Adhesive, Non-Acrylic)
| Item | Content |
|---|---|
| Base Tariff | 4.2% |
| Additional Tariff (Section 301/Retaliatory) | +25.0% |
| Total Tax Rate | 29.2% |
| Tax Detail | Base Tariff: 4.2%, Additional Tariff: 25.0% |
| Legal Basis | Direct from provided dataset |
📌 CRITICAL WARNING:
- This is the highest risk category. If your insulating film is made of PE, PP, PVC, or other non-acrylic plastics, and it is not self-adhesive, you will face a total tariff of 29.2%.
- The 25% additional tariff is a significant cost driver.
- Strategy: If possible, verify if the film can be classified as acrylic (3920.59.10.00) or self-adhesive (3919.xxxx) to reduce costs. However, material composition is strictly enforced by customs testing.
🛠️ IV. Customs Clearance Practical Advice (Field Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist (No Exceptions)
| Document | Must Provide | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify: Material (e.g., Acrylic, PE), Thickness, Width, Length, Self-Adhesive? Yes/No |
| ✅ Material Composition Statement | ✔️ | Explicitly state the polymer type. "Plastic" is too vague. Use "Poly(methyl methacrylate)" or "Polyethylene". |
| ✅ Product Photos | ✔️ | Show the roll/sheet, label, and any adhesive backing. Show scale if width is critical. |
| ✅ Commercial Invoice | ✔️ | Clearly describe as "Insulating Plastic Film" or "Electrical Adhesive Tape". Avoid generic terms like "Plastic Wrap". |
| ✅ Packing List | ✔️ | Indicate if products are in rolls or sheets. |
| ✅ Certificate of Origin | ✔️ | Required for US origin verification. |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 "Adhesive? Check Width. Material? Check Acrylic. Non-adhesive Non-acrylic? 29.2%!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Self-adhesive tape, roll, 19 cm wide | 3919.10.20.20 (0%) |
Describe as "Plastic Sheet" → Risk of reclassification |
| Self-adhesive tape, roll, 25 cm wide | 3919.90.50.30 (0%) |
Assume same as 19cm tape |
| Non-adhesive Acrylic Film | 3920.59.10.00 (0%) |
List as "Other Plastic Film" → Risk of 29.2% |
| Non-adhesive PE Film | 3920.99.20.00 (29.2%) |
Try to claim "Electrical" exemption → Fail. "Electrical" use does not exempt Chapter 39 plastics from Section 301 tariffs. |
| Insulated Wire (Film coated on wire) | 8544.49.90.00 (0%) |
Import as raw film |
✅ 3. Special Case Handling
| Case | Handling Advice |
|---|---|
| Is it Acrylic or PET? | Many insulating films are PET (Polyethylene Terephthalate). PET is not acrylic. If you import PET film, it likely falls under 3920.99.20.00 (29.2%). Do not misdeclare as Acrylic. |
| Self-Adhesive vs. Non-Adhesive | If the film has a pressure-sensitive adhesive, it is self-adhesive. If it requires glue/application, it is not. This changes the HS Code entirely. |
| Rolled vs. Cut Sheets | For self-adhesive items, width determines the subheading (≤20cm vs. >20cm). Ensure invoice specifies width. |
| Customs Lab Testing | Customs may perform FTIR testing to verify polymer type. Provide Material Safety Data Sheets (MSDS) and Supplier Certificates of Analysis (CoA) to expedite release. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3920.99.20.00 |
29.2% (Non-adhesive, non-acrylic) | No specific cert required | High Risk for non-acrylic films. Self-adhesive & Acrylic are 0%. |
| 🇪🇺 EU | 3920.99.99 |
~5-6% + VAT | REACH + RoHS | No Section 301-style tariffs, but VAT applies. |
| 🇨🇳 China | 3920.99.20 |
~5-10% | CCC (if electrical component) | Lower base tariff than US for non-adhesive films. |
| 🇯🇵 Japan | 3920.99.00 |
~5-10% | PSE (if electrical part) | Stable tariff environment. |
📌 Conclusion:
- The US market is uniquely punitive for non-adhesive, non-acrylic plastic films due to the 25% additional tariff.
- Self-adhesive tapes and Acrylic films enjoy 0% total tariffs, making them significantly more competitive.
- Supply Chain Strategy: If importing non-adhesive PE/PP films to the US, consider sourcing from Vietnam or Mexico to avoid Section 301 tariffs, or redesign the product to use Acrylic or self-adhesive backing.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Declaring PET Film as Acrylic Film
👉 Consequence: Customs lab test fails → 29.2% tariff + fines + delay.
✅ Correct: Verify polymer type. PET is different from Acrylic.
❌ Mistake 2: Declaring Non-Adhesive Film as Electrical Tape (HS 3919)
👉 Consequence: HS Code mismatch → Rejection/Return. Self-adhesive status is critical for HS 3919.
✅ Correct: If no adhesive, use HS 3920.
❌ Mistake 3: Ignoring Width for Self-Adhesive Rolls
👉 Consequence: Wrong subheading (3919.10 vs 3919.90) → Audit risk.
✅ Correct: State exact width in mm/cm on invoice.
❌ Mistake 4: Assuming "Electrical Use" Exempts Tariffs
👉 Consequence: Tariff Still Applies. Chapter 39 plastics are subject to Section 301 tariffs regardless of end-use.
✅ Correct: Focus on material and form (adhesive/width) for classification.
🎯 VII. Conclusion: Professional Declaration, Save Costs, Ensure Clearance!
🎯 Remember the Mnemonic:
🔹 "Adhesive? 0%. Acrylic? 0%. Non-Adhesive Non-Acrylic? 29.2%!"
🔹 "Check Width. Check Material. Don't Guess!"
📌 Pro Tip:
If your film is non-adhesive and non-acrylic (e.g., PE, PP, PVC), and you are importing to the USA, the 29.2% tariff is a major cost.
Solutions:
1. Change Material: Switch to Acrylic-based film if technically feasible (0% tax).
2. Change Form: Add a self-adhesive backing (0% tax).
3. Change Origin: Source from non-China countries to avoid Section 301.
4. Apply for Exclusions: Check if specific HTS codes have exclusion lists (though unlikely for this category).
📣 Immediate Action:
📞 Contact your supplier for Material Composition Data.
📄 Verify Self-Adhesive Status and Roll Width.
🚀 Apply for a Binding Ruling from CBP if unsure.
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Your Profit Margin Depends on Correct HS Codes!
用户评价
关于 HS 编码归类
协调制度(HS)是由世界海关组织(WCO)制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构:
- 章(2 位)——商品大类(例如:第 84 章:机器和机械设备)
- 品目(4 位)——章内的更具体分类
- 子目(6 位)——国际通用细分,所有 WCO 成员国统一使用
- 本国细分(8-10 位)——各国自行扩展的细分编码,如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时,适用的关税税率可能包括:
- 最惠国(MFN)税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税,如 301 条款(反倾销)、232 条款(国家安全)或反补贴税
本页内容仅供参考。如需正式归类,请咨询当地海关或持牌报关代理。