Ethylene Elastomer Profile Raw Material
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3901909000 | 41.5% | CN | US | 官方文档 |
| 3919905060 | 40.8% | CN | US | 官方文档 |
| 3920100000 | 39.2% | CN | US | 官方文档 |
| 3901901000 | 35.0% | CN | US | 官方文档 |
| 3919102055 | 40.8% | CN | US | 官方文档 |
商品图片
AI分析
🧪 Ethylene Elastomer Profile Raw Material (乙烯弹性体原料)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is "Ethylene Elastomer Profile Raw Material"?
Ethylene Elastomer Profile Raw Material refers to the primary polymerized forms of ethylene-based synthetic rubbers. These materials are characterized by high elasticity, flexibility, and resistance to weathering. In international trade, they are typically classified based on their physical state and specific chemical structure.
The key distinction lies in whether the material is in its primary form (raw resin/granules) or processed into specific shapes like films/sheets.
⚠️ Key Distinction Point:
- If the product is raw polymer resin/granules intended for further manufacturing → Classify under Chapter 3901 (Ethylene Polymers). - If the product is already formed into films, sheets, or tapes (even if raw for packaging) → Classify under Chapter 3919/3920 (Plastic Sheets/Films).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Tax Rate (Total) | Key Differentiator |
|---|---|---|---|---|
3901.90.90.00 |
Ethylene Elastomer Raw Material, Primary Form, Other Ethylene Polymers | Raw resin, granules, or powder for industrial processing | 41.5% | Primary Form: Unshaped polymer. "Other" category under Ethylene Polymers. |
3919.90.50.60 |
Ethylene Elastomer Packaging Film, Plastic Film, Flat Shape | Self-adhesive or non-adhesive films made from ethylene elastomers | 40.8% | Flat Film: Pre-shaped into a flat, flexible film/web. |
3920.10.00.00 |
Ethylene Polymer Film/Sheet, Material is Ethylene Elastomer | Non-self-adhesive films, plates, sheets, or foils | 39.2% | Non-Adhesive Film: Solid sheets or films not self-adhesive. |
3901.90.10.00 |
Ethylene Polymer Raw Material, Elastomer Purpose, Primary Form | Specific ethylene elastomer resins (e.g., POE, EPDM precursors) | 35.0% | Primary Form: Raw resin. Lower base duty than 3901.90.90. |
3919.10.20.55 |
Plastic Flat Raw Material, Ethylene Elastomer Material, Other Category | Flat plastic articles of ethylene elastomer | 40.8% | Flat Article: Pre-shaped flat plastic items. |
🔍 Important Reminder:
- "Profile Raw Material" usually implies the raw polymer (Chapter 3901). If it is sold as granules or powder, it is not a film or sheet. - Misclassifying raw resin as "film" (3919/3920) can lead to penalties because the physical form differs significantly. - The term "Primary Form" is critical. If the material is not yet processed into a specific article (like a film), it must be declared as raw polymer.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (and subsequent imports)
🎯 1. 3901.90.90.00 – Ethylene Elastomer Raw Material, Primary Form, Other
| Item | Content |
|---|---|
| Base Duty | 6.5% (ad valorem) |
| Section 301 Surcharge | +25.0% (USITC Footnote: Section 301 Tariffs) |
| 122 Section Tariff | +10.0% (Specific policy surcharge for certain Chinese goods) |
| Total Duty Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Eligibility | ❌ Not Eligible (High duty rate exceeds exemption thresholds) |
| Legal Basis Path | USITC:3901.90.90.00 → Section 301: Footnote → 122 Section Policy |
📌 Explanation:
- The 6.5% is the standard Most Favored Nation (MFN) duty for "Other Ethylene Polymers." - The 25% is the Section 301 tariff imposed on a broad range of Chinese industrial inputs. - The 10% is an additional surcharge under specific trade policy clauses (122 Section). - Total 41.5% is a high duty rate. Proper declaration of "Primary Form" is essential to avoid being misclassified as a finished product with potentially different rates.
🎯 2. 3901.90.10.00 – Ethylene Polymer Raw Material, Elastomer Purpose, Primary Form
| Item | Content |
|---|---|
| Base Duty | 0.0% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| 122 Section Tariff | +10.0% |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | USITC:3901.90.10.00 → Section 301: Footnote → 122 Section Policy |
📌 Note:
- If your ethylene elastomer falls under this specific subheading (often for specific types like POE), the base duty is 0%. - However, the 35% total (25% + 10%) is still significant. - Strategic Advantage: If your product can be classified under3901.90.10.00instead of3901.90.90.00, you save 6.5% on the base duty. Ensure your technical data sheet supports this specific classification.
🎯 3. 3919.90.50.60 / 3919.10.20.55 – Plastic Films/Sheets (If Applicable)
| Item | Content |
|---|---|
| Base Duty | 5.8% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| 122 Section Tariff | +10.0% |
| Total Duty Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Eligibility | ❌ Not Eligible |
📌 Note:
- These codes apply only if the "profile raw material" is actually sold as a pre-formed film or sheet. - If you are importing raw resin granules, do not use these codes. - The total rate is 40.8%, slightly lower than the general3901.90.90.00(41.5%) but higher than3901.90.10.00(35.0%).
🎯 4. 3920.10.00.00 – Ethylene Polymer Film/Sheet (Non-Adhesive)
| Item | Content |
|---|---|
| Base Duty | 4.2% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| 122 Section Tariff | +10.0% |
| Total Duty Rate | 39.2% |
| Tax Calculation | CIF Value × 39.2% |
| De Minimis Eligibility | ❌ Not Eligible |
📌 Note:
- This is the lowest total duty rate (39.2%) among the options, but only if the product is a non-adhesive film or sheet. - Again, physical form is key: Is it a roll of film? Or a bag of granules?
🛠️ IV. Customs Clearance Practical Advice (Combat-Ready Pitfall Guide)
✅ 1. Required Documentation Checklist (Non-Negotiable)
| Document | Must Provide | Description |
|---|---|---|
| ✅ Technical Data Sheet (TDS) | ✔️ | Must clearly state "Ethylene Elastomer," "Primary Form," and molecular structure. |
| ✅ Product Photos | ✔️ | Show granules, powder, or bulk resin. Do not show finished films unless that's what you're shipping. |
| ✅ Commercial Invoice | ✔️ | Must accurately describe: "Ethylene Elastomer Resin, Primary Form, Not Yet Shaped." |
| ✅ Bill of Lading | ✔️ | Ensure HS Code is correctly listed. |
| ✅ Certificate of Origin | ✔️ | Required for verifying origin (China) and applying Section 301/122 tariffs. |
| ✅ MSDS/SDS | ✔️ | Safety Data Sheet for handling and classification verification. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Raw Form is Key, Granules vs. Film, Declare True Form, Avoid Penalty Stress!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Raw Resin/Granules | 3901.90.10.00 or 3901.90.90.00 |
Misdeclare as "Film" (3920) → 39.2% or 40.8% (if eligible) vs 35-41.5% (but risk of misclassification) |
| Pre-formed Film | 3920.10.00.00 or 3919.90.50.60 |
Misdeclare as "Raw Resin" (3901) → Potential duty underpayment if base rate is lower for film, or overpayment if base rate is higher. |
| Specific Elastomer Type | 3901.90.10.00 (if applicable) |
Use generic 3901.90.90.00 → Pay 6.5% more in base duty. |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Resin | Provide customer specifications to justify classification under 3901.90.10.00 if it fits. |
| Mixed Shipments (Resin + Film) | Declare separately! Do not combine raw resin and film in one line item. Each has different HS codes and potentially different rates. |
| Ethylene Elastomer vs. Ethylene Copolymer | Ensure TDS confirms "Elastomer" properties. If it's a standard plastic, classification may change. |
| Transshipment via Third Country | If shipped via Vietnam/Malaysia, Country of Origin is still China. Section 301/122 tariffs still apply. No tariff avoidance by transshipment. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate | Certification Requirements | Remarks |
|---|---|---|---|---|
| 🇺🇸 United States | 3901.90.10.00 or 3901.90.90.00 |
35.0% or 41.5% | N/A | High duties due to Section 301 + 122. |
| 🇨🇳 China | 3901.90.10.00 or 3901.90.90.00 |
5.0% - 6.5% | N/A | No additional surcharges for domestic trade. |
| 🇪🇺 European Union | 3901.90 |
6.5% | REACH Registration | No Section 301/122. REACH compliance required. |
| 🇦🇺 Australia | 3901.90 |
5.0% | AICIS | Low duties, standard import declaration. |
| 🇯🇵 Japan | 3901.90 |
0% - 6.0% | JIS Standards | Often 0% under JAEPA, but verify specific elastomer type. |
📌 Conclusion:
- The US is the most expensive market for ethylene elastomer raw materials due to the 35-41.5% total duty. - China, EU, Australia, and Japan have significantly lower duties. - If your final market is the US, consider supply chain diversification or pre-classification rulings to ensure correct HS Code assignment and avoid penalties.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "Ethylene Elastomer Profile Raw Material" as "Plastic Film" when it is actually granules.
👉 Consequence: Misclassification. Even if the rate seems similar, physical form must match the HS code description. This can lead to delays, inspections, and fines.
❌ Error 2: Ignoring the 122 Section Tariff (10%).
👉 Consequence: Underpayment of Duties. The 122 Section is a significant add-on. If you only account for Section 301 (25%), you will owe an additional 10%.
❌ Error 3: Using 3901.90.90.00 for a product that qualifies for 3901.90.10.00.
👉 Consequence: Overpayment. You pay an extra 6.5% in base duty unnecessarily. Always check if your specific ethylene elastomer fits the 10.00 subheading.
❌ Error 4: Failing to provide a Technical Data Sheet specifying "Primary Form."
👉 Consequence: Customs Query. Without proof of "Primary Form," Customs may classify it as a manufactured article, leading to higher duties or rejection.
✅ Correct Practice:
"Ethylene Elastomer Resin, Primary Form, Granular, Model XYZ, TDS Attached, Not Yet Shaped"
🎯 VII. Conclusion: Precise Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Raw Resin is King, Granules Don't Lie, Check Subheading 10, Save 6.5%, Avoid 122 Surprise, Total 35-41% is the Price!"
🔹 "HS Code Dictates Cost, 6.5% Difference, One Mistake, Thousands Lost!"
📌 Pro Tip:
If your ethylene elastomer is shipped in bulk bags, ensure the invoice explicitly states "Primary Form, Not Shaped."
For pre-cut films, use 3920.10.00.00 (39.2% total) or 3919.90.50.60 (40.8% total).
For granules/resin, aim for 3901.90.10.00 (35.0% total) if possible, otherwise 3901.90.90.00 (41.5%).
📣 Immediate Action:
📞 Consult a Customs Broker + Provide TDS + Request HS Code Pre-Ruling from CBP
🚀 Ensure Your Ethylene Elastomer Profiles Are Classified Correctly, Duties Minimized, and Cleared Efficiently!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Percent of Duty Matters!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。