Folding Stand
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 9620007000 | 37.5% | CN | US | 官方文档 |
| 7326908630 | 87.9% | CN | US | 官方文档 |
| 9620005000 | 40.3% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
商品图片
AI分析
📐 Folding Stand (Tripods & Supports)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: What exactly is a "Folding Stand"?
A "Folding Stand" is a broad category in international trade, typically referring to supports for electronic devices, cameras, phones, or monitors. Its classification hinges on two critical factors: Material Composition and Specific Function.
1. Dedicated Support Devices (Chapter 96):
If the item is primarily designed as a support for phones, tablets, or cameras (tripods, monopods, desk stands), it falls under Chapter 96. This is often the lower-tax pathway if the material is plastic or mixed.
2. Miscellaneous Metal Articles (Chapter 73):
If the item is made of Iron/Steel or Aluminum/Copper and serves a generic supporting function, it may be classified under Chapter 73. These items are subject to significantly higher punitive tariffs due to Section 232 and Section 301 duties.
⚠️ Key Distinction Point:
- If it is a plastic or non-metal specific stand for consumer electronics → Chapter 96 (Lower Duty).
- If it is a metal (Steel/Aluminum) support → Chapter 73 (High Duty + 50% Penalty).
- Material matters: Iron/Steel attracts a 50% additional tariff; Aluminum/Copper also attracts 50%.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Material Inference | Duty Rate |
|---|---|---|---|
9620.00.70.00 |
Folding stands, tripods, and similar supports (Other) | Unspecified (Likely Aluminum or Mixed) | 37.5% |
9620.00.50.00 |
Folding stands, tripods, and similar supports (Cell phones/Tablets) | Unspecified (Likely Plastic or Metal) | 40.3% |
7326.90.86.30 |
Other articles of iron or steel (Other) | Iron/Steel (Metal) | 87.9% |
7326.90.86.88 |
Other articles of iron or steel (Other accessories/parts) | Iron/Steel (Metal) | 87.9% |
🔍 Critical Reminder:
- Chapter 96 Codes (9620.00.50.00/9620.00.70.00) are for "Specialized Supports." They include Base Duty + 25% Section 301 + 10% IEEPA. - Chapter 73 Codes (7326.90.86.30/7326.90.86.88) are for "Miscellaneous Metal Goods." They include Base Duty + 25% Section 301 + 10% IEEPA + 50% Section 232 (Steel/Aluminum Penalty). - Do not misclassify a Steel Stand as Chapter 96 to avoid heavy penalties.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards
🎯 1. 9620.00.70.00 – Folding Stands (Other/General)
| Item | Content |
|---|---|
| Base Duty | 2.5% (ad valorem) |
| Section 301 Surcharge | +25.0% (China-origin punitive tariff) |
| Section 232 / IEEPA Surcharge | +10.0% (122 Clause / IEEPA) |
| Total Tax Rate | 37.5% |
| Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | USITC:9620.00.70.00 → SECTION301:Footnote → IEEPA:10% |
📌 Explanation:
- This code is for general-purpose folding stands or tripods. - The 37.5% rate is high but significantly lower than the metal-specific codes. - Applies if the material is not strictly defined as "Iron/Steel" for industrial use, or if it's a "consumer support device."
🎯 2. 9620.00.50.00 – Folding Stands (For Cell Phones/Tablets)
| Item | Content |
|---|---|
| Base Duty | 5.3% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 232 / IEEPA Surcharge | +10.0% |
| Total Tax Rate | 40.3% |
| Calculation | CIF Value × 40.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:9620.00.50.00 → SECTION301:Footnote → IEEPA:10% |
📌 Note:
- If the stand is specifically designed for smartphones, tablets, or e-readers, use this code. - The base rate is slightly higher (5.3%), but still avoids the catastrophic 50% metal penalty.
🎯 3. 7326.90.86.30 & 7326.90.86.88 – Iron/Steel Supports (The "High Tax" Trap)
| Item | Content |
|---|---|
| Base Duty | 2.9% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 232 Surcharge (Steel/Al/Cu) | +50.0% (Crucial!) |
| IEEPA Surcharge | +10.0% |
| Total Tax Rate | 87.9% |
| Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:7326.90.86.30 → SECTION232:SteelAlCu → SECTION301 → IEEPA |
📌 Warning:
- If your folding stand is made of Iron, Steel, Aluminum, or Copper, it MUST be declared under Chapter 73 (or a specific steel article code). - The 50% penalty for Steel/Aluminum/Copper is non-negotiable under USITC regulations. - Total rate of 87.9% makes these products extremely uncompetitive in the US market compared to Chapter 96 items.
🛠️ IV. Clearance Practical Advice (Combat Pitfalls)
✅ 1. Preparation Checklist (Mandatory)
| Document | Required? | Note |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state Material (Plastic vs. Metal) and Function (Phone vs. Monitor). |
| ✅ Material Declaration | ✔️ | Explicitly state: "Made of ABS Plastic" or "Made of Iron Alloy." |
| ✅ Product Photos | ✔️ | Show the item in use (e.g., holding a phone) to support Chapter 96 classification. |
| ✅ Commercial Invoice | ✔️ | Describe as "Plastic Phone Stand" or "Tripod," NOT "Steel Part." |
| ✅ Certificate of Origin | ✔️ | For US origin verification (if applicable). |
✅ 2. Declaration Strategy (Key Mantras)
🔥 "Material Defines Tax, Function Defines Code. Don't mix Steel with Consumer Electronics!"
| Scenario | Correct Declaration | Wrong Declaration | Consequence |
|---|---|---|---|
| Plastic/Aluminum Phone Stand | 9620.00.50.00 |
7326.90.86.30 |
Overpay 47.6% (87.9% vs 40.3%) |
| Steel Tripod for Camera | 9620.00.70.00 (If deemed "Support") OR 7326... (If deemed "Metal Part") |
9620.00.70.00 (if strictly steel part) |
Risk of reclassification & 50% penalty |
| Generic Metal Bracket | 7326.90.86.88 |
9620.00.70.00 |
Audit Risk + Back taxes + Penalty |
| Kit: Stand + Cable | Declare as Stand (9620...) |
Split Declaration | Complex scrutiny, potential 87.9% on parts |
📌 Critical Insight:
- If the stand is primarily for holding a phone/tablet, argue for Chapter 96 even if it has metal parts, provided it's not "industrial steel." - If it is a heavy-duty iron/steel bracket, you cannot avoid Chapter 73. You must pay the 87.9%.
✅ 3. Special Handling Cases
| Case | Handling Advice |
|---|---|
| OEM Custom Stands | Provide design drawings showing "Consumer Use" to support Chapter 96. |
| Mixed Materials | If >50% value is plastic, argue for Chapter 96. If metal is structural, expect Chapter 73. |
| AliExpress/Temu Small Packages | Do NOT rely on De Minimis. All these codes are denied de minimis exemption. Full duty applies. |
| Aluminum Stands | Beware: Aluminum falls under the 50% Section 232 penalty if classified as metal article. Try to classify as 9620.00.70.00 if it's a "tripod/support." |
🌍 V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Duty Rate (CN Origin) | Key Requirement |
|---|---|---|---|
| 🇺🇸 USA | 9620.00.50.00 |
40.3% | FCC (if electronic), Material Proof |
| 🇨🇳 China | 9620.00.50.00 |
10-15% (Import) | CCC (if electronic components) |
| 🇪🇺 EU | 9620.00.50.00 |
0-1.7% | CE Marking, RoHS |
| 🇬🇧 UK | 9620.00.50.00 |
0-1.7% | UKCA Marking |
| 🇯🇵 Japan | 9620.00.50.00 |
3-8% | PSE (if powered) |
📌 Conclusion:
- USA is the highest duty market due to Section 301 + IEEPA + Section 232. - EU/UK/Japan have minimal or zero duties, making them better markets for metal goods if US tariffs are prohibitive.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring a Steel Tripod as 9620.00.70.00 to avoid Section 232.
👉 Consequence: Customs audit, reclassification to 7326, back taxes + 50% penalty.
❌ Error 2: Declaring a Plastic Stand as 7326.90.86.30 due to "Metal Screws."
👉 Consequence: Overpaying 47.6% (87.9% vs 40.3%).
❌ Error 3: Ignoring the De Minimis ban.
👉 Consequence: Packages under $800 are NOT exempt for these codes. Duty is charged on the entire value.
❌ Error 4: Vague description "Stand."
👉 Consequence: Customs assigns highest risk code automatically.
✅ Correct Action:
"ABS Plastic Folding Phone Stand, Model XYZ, Black" →
9620.00.50.00
"Iron Alloy Camera Tripod, Model ABC, Heavy Duty" →7326.90.86.30(Accept the 87.9% or redesign material).
🎯 VII. Conclusion: Precision Saves Profit!
🎯 Remember the Mantra:
🔹 "Plastic/Consumer = 40% | Steel/Industrial = 88% | Aluminum = 88%!"
🔹 "Don't let a 50% penalty wipe out your margin!"
📌 Pro Tip:
If your product is 100% Plastic and used for phones, insist on 9620.00.50.00.
If your product is Metal, evaluate if you can redesign it as a "Consumer Support Device" (9620.00.70.00) to drop the rate from 87.9% to 37.5%.
📣 Immediate Action:
📞 Contact your customs broker before shipping.
🚀 Submit Advance Ruling request if possible.
💰 Calculate Landed Cost with 40.3% vs 87.9% to choose the right material/design.
✨ Professional Clearance Starts with Accurate Classification!
💼 Every 1% of duty saved is pure profit kept.
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。