Full Face Mask
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 9020009000 | 12.5% | CN | US | 官方文档 |
| 4016990500 | 20.9% | CN | US | 官方文档 |
| 6307909870 | 24.5% | CN | US | 官方文档 |
| 4016996050 | 37.5% | CN | US | 官方文档 |
| 9020006000 | 12.5% | CN | US | 官方文档 |
商品图片
AI分析
🎭 Full Face Mask (Gas Mask / Respiratory Protector)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Entry Strategy
📌 I. Product Definition & Classification: Do You Truly Understand the "Full Face Mask"?
A Full Face Mask, in the context of international trade, generally refers to respiratory protective equipment that covers the entire face, providing eye, nose, and mouth protection against toxic gases, dust, or particulates. It is a critical component of Personal Protective Equipment (PPE).
In customs classification, the core distinction lies in its functional intent and material composition: * Functional Purpose (HS 9020): If the mask is specifically designed as a "respirator" or "gas mask" for breathing protection, it falls under Heading 9020. * Material Composition (HS 4016): If the mask is classified primarily as a general-purpose rubber/silicone accessory or a non-medical protective item without specific respiratory certification, it may fall under Heading 4016 (Rubber articles). * Textile/General Use (HS 6307): In some borderline cases, if it resembles a general protective covering without complex filtering mechanisms, it might be viewed as a general textile article.
⚠️ Key Distinction Point:
- If it is a dedicated gas mask/respirator with filters or designed for hazardous environment breathing → HS 9020
- If it is a general rubber/silicone mask (e.g., for dust, paint, or general protection) without specific respiratory certification → HS 4016
- If it is a general protective cover (less common for full-face) → HS 6307
📦 II. HS Code Classification Details (Based on Provided Data)
The following classification options are derived from the provided dataset. Each code reflects a different regulatory interpretation of the product's primary function and material.
| HS Code | Product Description & Summary | Applicable Scenario | Tax Rate Breakdown |
|---|---|---|---|
9020.00.90.00 |
Respiratory/Gas Mask Category Summary: The mask belongs to respiratory appliances/gas masks, fitting the "other" residual clause. |
Dedicated gas masks, industrial respirators, fire-fighting masks. | 12.5% Base: 2.5% Section 301: 0% Section 122: 10% |
4016.99.05.00 |
Sulfur-Cured Rubber Article Summary: The mask is likely a sulfur-cured rubber product, classified as other unlisted household/protection items. |
General rubber masks, silicone masks without specific gas-tight certification. | 20.9% Base: 3.4% Section 301: 7.5% Section 122: 10% |
6307.90.98.70 |
General Protective Item Summary: The mask matches the target classification core purpose/form completely, no material conflict. |
General face covers, non-medical protective shields, textile-based or hybrid covers. | 24.5% Base: 7.0% Section 301: 7.5% Section 122: 10% |
4016.99.60.50 |
General Sulfur-Cured Rubber Article Summary: Often used as a rubber product, fitting the "other sulfur-cured rubber" residual clause. |
Heavy-duty rubber masks, industrial rubber face shields. | 37.5% Base: 2.5% Section 301: 25% Section 122: 10% |
9020.00.60.00 |
Respiratory Appliance (Other) Summary: The mask is consistent with protective masks, possibly falling under respiratory appliances/gas masks. |
Specific types of gas masks or respirators not listed in 9020.90. | 12.5% Base: 2.5% Section 301: 0% Section 122: 10% |
🔍 Critical Observation:
- HS 9020 (Codes .90.00 and .60.00) offers the lowest total tax rate (12.5%) because it has 0% Section 301 tariff. This assumes the product is strictly recognized as a "Gas Mask/Respirator." - HS 4016 and HS 6307 incur Section 301 tariffs (ranging from 7.5% to 25%), leading to higher total costs (20.9% - 37.5%).
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariff structure (including Section 122 and Section 301)
🎯 1. HS Code 9020.00.90.00 & 9020.00.60.00 —— Respiratory/Gas Masks (BEST RATE)
| Item | Content |
|---|---|
| Base Rate | 2.5% |
| Section 301 Tariff | 0.0% (No additional 301 tariff applied to this subheading in this dataset) |
| Section 122 Tariff | 10.0% (Specific additional tariff) |
| Total Tax Rate | 12.5% |
| Tax Calculation | CIF Value × 12.5% |
| De Minimis Exemption | ❌ Not Applicable (Respiratory equipment is generally excluded from de minimis thresholds due to health/safety regulations) |
| Legal Basis Path | Heading 9020 → Subheading 9020.00 → Section 122 Directive |
📌 Explanation:
- This classification is the most cost-effective for full-face gas masks. - The 0% Section 301 component is crucial. It suggests that "Gas Masks" under HS 9020 are treated differently from general rubber goods in this specific tariff schedule. - Section 122 Tariff (10%) applies to all imported goods from China, regardless of HS code.
🎯 2. HS Code 4016.99.05.00 —— Rubber Articles (Mid Rate)
| Item | Content |
|---|---|
| Base Rate | 3.4% |
| Section 301 Tariff | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 20.9% |
| Tax Calculation | CIF Value × 20.9% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | Heading 4016 → Subheading 4016.99 → Section 301 Footnote → Section 122 Directive |
📌 Explanation:
- If customs classifies the mask as a general rubber product rather than a medical/respiratory device, the Section 301 rate drops to 7.5%. - Total cost is significantly higher than HS 9020.
🎯 3. HS Code 6307.90.98.70 —— Other Textile/General Items (Higher Rate)
| Item | Content |
|---|---|
| Base Rate | 7.0% |
| Section 301 Tariff | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 24.5% |
| Tax Calculation | CIF Value × 24.5% |
| De Minimis Exemption | ❌ Not Applicable |
📌 Explanation:
- This classification has a higher base rate (7.0%) but the same Section 301 rate as rubber articles. - Use only if the product is not recognized as a rubber or respiratory device (e.g., a simple fabric face shield).
🎯 4. HS Code 4016.99.60.50 —— Other Rubber Articles (HIGHEST RATE)
| Item | Content |
|---|---|
| Base Rate | 2.5% |
| Section 301 Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | Heading 4016 → Subheading 4016.99 → High-Section 301 Footnote → Section 122 Directive |
📌 Explanation:
- This is the worst-case scenario. - The 25% Section 301 tariff applies to certain other rubber articles. - Total tax of 37.5% can destroy profit margins. Avoid this classification if possible.
🛠️ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
✅ 1. Documentation Checklist (Non-Negotiable)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: "Full Face Gas Mask," material (silicone/rubber), filter compatibility, and intended use (respiratory protection). |
| ✅ NIOSH/CE/EN Certifications | ✔️ | Critical for HS 9020. Proof that the mask meets respiratory safety standards strengthens the case for HS 9020 classification. |
| ✅ Product Photos | ✔️ | Clear images showing the mask, filters (if attached), and packaging. |
| ✅ Commercial Invoice | ✔️ | Description: "Full Face Respirator Mask for Industrial Use." Avoid vague terms like "Rubber Face Cover." |
| ✅ Material Declaration | ✔️ | Specify if it contains medical-grade silicone, natural rubber, or synthetic rubber. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 "Function First, Material Second: Respirator = 9020, Rubber = 4016!"
| Scenario | Correct HS Code | Risk of Misclassification |
|---|---|---|
| Mask has NIOSH/CE Respiratory Certification | 9020.00.90.00 or 9020.00.60.00 |
✅ Low Risk. High probability of approval. Lowest tax (12.5%). |
| Mask is for Paint/Dust Protection (No Respiratory Cert) | 4016.99.05.00 |
⚠️ Medium Risk. Customs may argue it's a gas mask. Be prepared to justify material-only classification. |
| Mask is a Simple Fabric/Plastic Shield | 6307.90.98.70 |
✅ Low Risk if clearly not for respiratory protection. |
| Any Rubber Mask with No Certification | 4016.99.60.50 |
❌ High Risk. Highest tax (37.5%). Avoid if possible. |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM/Custom Masks | Provide the original design drawings and specify "Gas Mask" in the invoice description. |
| Mask + Filter Kit | Declare the mask under HS 9020. Filters may be declared separately under their own HS code (e.g., 3926.90) to optimize tax. |
| Medical vs. Industrial | If marketed as "Industrial Gas Mask," it fits HS 9020 better than "Medical Face Shield" (which might be HS 3006 or 9018). |
| Section 122 Impact | Note that all classifications incur a 10% Section 122 tariff. This is unavoidable for China-origin goods. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Total Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 9020.00.90.00 |
12.5% | NIOSH (if claiming respirator), Section 122 +301 apply | Best Rate. Avoid HS 4016.60.50 (37.5%). |
| 🇺🇸 USA (Alternative) | 4016.99.05.00 |
20.9% | General Rubber Standards | Higher tax due to 7.5% Section 301. |
| 🇺🇸 USA (Worst Case) | 4016.99.60.50 |
37.5% | General Rubber Standards | Avoid. High Section 301 rate. |
| 🇨🇳 China | 9020.90.90.00 |
~5-10% | GB Standards (China National) | No Section 301 or 122 tariffs. |
| 🇪🇺 EU | 9020.30.00 |
0-4% | CE Marking (PPE Regulation) | No Section 122/301. |
📌 Conclusion:
- USA is the most complex market due to Section 301 and Section 122 tariffs. - HS 9020 is the strategic winner for Full Face Masks in the US, offering a 25% tax savings compared to the worst-case rubber classification.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Classifying a NIOSH-certified gas mask as a general rubber product (4016.99.60.50).
👉 Consequence: You pay 37.5% tax instead of 12.5%. Loss of 25% in profit!
❌ Error 2: Declaring the product as "Rubber Face Cover" without mentioning "Respirator."
👉 Consequence: Customs may reclassify it to the highest rubber rate or demand additional documentation, causing delays.
❌ Error 3: Ignoring Section 122 Tariff.
👉 Consequence: Assuming 0% or 2.5% total tax. Reality: Add 10% to ALL classifications for China-origin goods.
❌ Error 4: Splitting Mask and Filter into one declaration incorrectly.
👉 Consequence: If filters are classified under high-tariff codes, total cost rises. Keep them separate if possible.
✅ Correct Approach:
"Full Face Gas Mask, Silicone, NIOSH Approved, for Industrial Respiratory Protection. Model: XYZ. HS: 9020.00.90.00."
🎯 VII. Conclusion: Professional Classification Saves Money!
🎯 Remember the Mantra:
🔹 "If it breathes, it’s 9020. If it’s just rubber, it’s 4016."
🔹 "9020 saves 25% vs. 4016.60.50. Don’t let classification kill your margin!"
🔹 "Section 122 is unavoidable (10%). Plan for it in every scenario."
📌 Pro Tip:
If your mask is not certified as a respirator but is made of rubber, consider classifying under
4016.99.05.00(20.9%) rather than4016.99.60.50(37.5%). The difference is 16.6%!
📣 Immediate Action:
📞 Contact your customs broker to confirm if your product qualifies for HS 9020.
🚀 Provide NIOSH/CE certificates upfront to support the 12.5% rate.
💼 Your profit margin depends on accurate HS coding!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。