Industrial Grade Ethylene Polymer Monofilament
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3916100000 | 40.8% | CN | US | 官方文档 |
| 3916903000 | 41.5% | CN | US | 官方文档 |
商品图片
AI分析
🧵 Industrial-Grade Ethylene Polymer Monofilament (Plastic Rods & Monofilaments)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Plastic Monofilaments"?
Industrial-grade ethylene polymer monofilaments are essential components in filtration, sieving, wire drawing, and heavy-duty textile applications. In international trade, these products fall under Chapter 39 (Plastics and Articles Thereof). The classification depends strictly on the material composition and physical form.
⚠️ Key Distinction Point:
- If the product is made of Ethylene Polymers (Polyethylene/PE) AND any cross-sectional dimension exceeds 1 mm → It is classified as Monofilament/Rod/Profile of Polyethylene.
- If the product is made of Other Plastics (e.g., PP, PVC, Nylon) AND any cross-sectional dimension exceeds 1 mm → It is classified as Monofilament/Rod/Profile of Other Plastics.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided , only two specific HS codes apply to this product description. There are no other valid codes within the provided scope.
| HS Code | Product Description | Applicable Scenario | Material Type |
|---|---|---|---|
3916.10.00.00 |
Monofilament, rods, sticks, and profile shapes, of plastics: Of polymers of ethylene | Industrial PE monofilaments, PE rods, PE profile shapes (cross-section >1mm) | ✅ Ethylene Polymers (PE) |
3916.90.30.00 |
Monofilament, rods, sticks, and profile shapes, of plastics: Of other plastics | Industrial monofilaments made of PP, PVC, Nylon, etc. (cross-section >1mm) | ❌ Other Plastics |
🔍 Critical Note:
- The description "Industrial Grade Ethylene Polymer Monofilament" explicitly states "Ethylene Polymer".
- Therefore, the primary and correct classification is3916.10.00.00.
-3916.90.30.00is only relevant if the product is NOT made of ethylene polymers (e.g., if it were Polypropylene). For this specific query,3916.10.00.00is the direct match.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
✅ Applicable Country: USA (US)
✅ Origin: China (CN)
✅ Data Source: Provided
🎯 1. 3916.10.00.00 —— Monofilament of Polymers of Ethylene (Correct Match)
| Item | Content |
|---|---|
| Product | Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: Of polymers of ethylene |
| HS Code | 3916.10.00.00 |
| Basic Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | 基础关税: 0.0%, 加征关税: 0.0% |
| Legal Basis | Derived from provided JSON data |
📌 Explanation:
- This is a duty-free entry for ethylene polymer monofilaments under the provided data.
- No additional Section 301 tariffs or IEEPA tariffs are listed for this specific HS code in the source.
- Benefit: Zero tariff cost significantly reduces landed cost for industrial PE monofilaments imported from China to the US.
🎯 2. 3916.90.30.00 —— Monofilament of Other Plastics (Alternative Scenario)
| Item | Content |
|---|---|
| Product | Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: Of other plastics: Other: Other: Monofilament |
| HS Code | 3916.90.30.00 |
| Basic Tariff | 6.5% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 31.5% |
| Tax Detail | 基础关税: 6.5%, 加征关税: 25.0% |
| Legal Basis | Derived from provided JSON data |
📌 Warning:
- Do NOT misclassify Ethylene Polymers (PE) into this code.
- If you import PE monofilaments but declare them under3916.90.30.00, you will pay 31.5% instead of 0%.
- Conversely, if you import PP (Polypropylene) monofilaments, you must use this code and pay 31.5%.
- Incorrect classification leads to overpayment or compliance risks.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist (No Exceptions)
| Document | Required | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state "Polyethylene" or "PE" (e.g., HDPE, LDPE, LLDPE) to justify HS Code 3916.10.00.00. |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Proves chemical composition (ethylene polymer). |
| ✅ Product Photos | ✔️ | Show the monofilament/rod cross-section and any surface texture (e.g., grooved, smooth). |
| ✅ Cross-Section Measurement | ✔️ | Confirm that any dimension exceeds 1 mm. If ≤1mm, it may fall under different HS codes (not in ). |
| ✅ Commercial Invoice | ✔️ | Description must match: "Industrial Ethylene Polymer Monofilament, Cross-section >1mm". |
| ✅ Packing List | ✔️ | Weight and dimensions for freight calculation. |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Material First, Dimension Second, Name Precise, Duty Saved!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Polyethylene (PE) Monofilament | 3916.10.00.00 (0% Tax) |
Misdeclare as "Plastic Rod" under 3916.90.30.00 → 31.5% Tax |
| Polypropylene (PP) Monofilament | 3916.90.30.00 (31.5% Tax) |
Misdeclare as "Ethylene Polymer" → Compliance Violation |
| Monofilament ≤ 1mm | Not in (Likely different HTS) | Force into >1mm code → Misclassification |
| Surface-Worked PE Monofilament | 3916.10.00.00 |
Assume surface work changes classification → Unnecessary Risk |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Mixed Materials | If the product is a blend (e.g., PE + Fillers), the primary polymer (Ethylene) still dictates 3916.10.00.00 if >50% by weight. |
| Surface Worked | The description "whether or not surface-worked" means grooving, texturing, or coloring does NOT change the HS code. |
| Composite Products | If monofilaments are woven into a fabric or mesh, they may fall under Chapter 56 or 60, not Chapter 39. Ensure you are importing raw monofilaments/rods. |
| US Origin | If imported from USA, tax is 0% regardless. If from China, 3916.10.00.00 is still 0% (per ), but verify no new retroactive tariffs apply. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3916.10.00.00 |
0% | None Specific | Zero duty advantage for PE monofilaments |
| 🇨🇳 China | 3916.10.00 |
~5-7% | CCC (if applicable) | Export from China to US benefits from 0% US duty |
| 🇪🇺 EU | 3916.10 |
~4-6% | REACH | VAT applies separately |
| 🇮🇳 India | 3916.10 |
~10% | BIS | Higher duties than US |
| 🇲🇽 Mexico | 3916.10 |
0% (if USMCA) | NOM | Check regional trade agreements |
📌 Conclusion:
- USA offers the lowest duty (0%) for Ethylene Polymer Monofilaments under the provided data.
- Misclassification can lead to a 31.5% penalty if "Other Plastics" are declared for PE products.
- Accurate material declaration is critical.
📌 VI. Common Mistakes & Pitfall Avoidance (Lessons Learned)
❌ Mistake 1: Declaring all plastic monofilaments under one code (3916.90.30.00)
👉 Consequence: Paying 31.5% on PE products that should be 0%. Overpayment!
❌ Mistake 2: Ignoring the "Cross-Sectional Dimension > 1mm" rule
👉 Consequence: If the monofilament is ≤1mm, it may fall under 3917 (Tubes, Pipes, Hoses) or other subheadings. Misclassification!
❌ Mistake 3: Using vague descriptions like "Plastic Wire"
👉 Consequence: Customs may inspect and reclassify, causing delays. Use "Ethylene Polymer Monofilament" explicitly.
❌ Mistake 4: Assuming "Surface Worked" changes the code
👉 Consequence: No change in HS code for surface work, but incorrect declaration may raise red flags. Stay precise.
✅ Correct Declaration Example:
"Industrial Ethylene Polymer (PE) Monofilament, Cross-Sectional Dimension >1mm, Surface Smooth, For Filtration Use, HTS 3916.10.00.00"
🎯 VII. Conclusion: Precision Classification, Cost Efficiency, Smooth Clearance!
🎯 Remember the Mantra:
🔹 "PE Monofilament >1mm = 0% Duty (3916.10)"
🔹 "Other Plastic Monofilament >1mm = 31.5% Duty (3916.90)"
🔹 "Material Matters Most, Dimension Matters Second!"
📌 Pro Tip:
- For Ethylene Polymers, always use 3916.10.00.00 to secure 0% tariff.
- For Non-Ethylene Plastics, prepare for 31.5% tariff under 3916.90.30.00.
- Verify cross-sectional dimensions to ensure compliance with the ">1mm" requirement.
📣 Immediate Action:
📞 Consult with a licensed customs broker + Provide Material Test Reports + Confirm Cross-Section Dimensions
🚀 Maximize profit margins by claiming the 0% duty advantage for Ethylene Polymer products!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tariff Saved is Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。