Lattice Border Frame
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3925200091 | 22.8% | CN | US | 官方文档 |
| 3925900000 | 40.3% | CN | US | 官方文档 |
| 7308200090 | 85.0% | CN | US | 官方文档 |
| 7308909560 | 85.0% | CN | US | 官方文档 |
| 7610100010 | 73.2% | CN | US | 官方文档 |
| 7610900040 | 90.7% | CN | US | 官方文档 |
商品图片
AI分析
🏗️ Lattice Border Frame (Plastic, Steel, and Aluminum Variants)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is a "Lattice Border Frame"?
In the context of international trade and construction materials, a "Lattice Border Frame" is not a single standardized commodity but a structural component used for decoration, boundary definition, or structural support in buildings and landscapes. Its classification depends entirely on the material composition and specific application (e.g., door/window frame vs. general architectural ornament).
Based on the provided dataset, this product falls into three main material categories:
- Plastic Lattice/Border Frames: Often used for decorative fencing, garden borders, or lightweight architectural trim.
- Steel Lattice/Mast Structures: Used for industrial towers, high-voltage transmission lattice masts, or heavy-duty structural frameworks.
- Aluminum Architectural Frames: Used for windows, doors, balconies, and ornamental building facades.
⚠️ Key Distinction Point:
- If it is Plastic and not specified elsewhere → Group 39 (Plastics).
- If it is Steel/Aluminum and used for Doors/Windows → Specific subheadings under Ch 73/76.
- If it is Steel/Aluminum and used for General Structure/Ornament (e.g., lattice masts, decorative walls) → General structural subheadings under Ch 73/76.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Mapping)
| HS Code | Product Description | Material | Application Scenario | Tax Rate (Total) |
|---|---|---|---|---|
3925.20.00.91 |
Builders' ware of plastics: Doors, windows and their frames and thresholds for doors, Other | Plastic | Plastic decorative lattice frames, garden borders, non-standard plastic window/door trims | 12.8% |
3925.90.00.00 |
Builders' ware of plastics: Other | Plastic | Generic plastic construction materials not fitting specific categories (e.g., pure lattice panels without door/window context) | 0.0% |
7308.20.00.90 |
Structures of iron or steel: Towers and lattice masts, Other | Steel | Steel lattice towers, transmission masts, structural lattice frameworks | 75.0% |
7308.90.95.60 |
Structures of iron or steel: Other: Architectural and ornamental work | Steel | Steel lattice borders, decorative steel fences, ornamental steel structures | 75.0% |
7610.10.00.10 |
Aluminum structures: Doors, windows and their frames... Windows and their frames | Aluminum | Aluminum lattice windows, window frames with decorative lattice elements | 50.0% |
7610.90.00.40 |
Aluminum structures: Other: Architectural and ornamental work | Aluminum | Aluminum lattice borders, ornamental aluminum fences, decorative aluminum trims | 80.7% |
🔍 Critical Reminder:
- Plastic: If the product is a "door/window frame," it attracts 12.8%. If it is a general "builder's ware" (like a lattice panel), it may be 0.0%.
- Steel: High tax burden. Whether it’s a mast (7308.20.00.90) or ornamental work (7308.90.95.60), the total tax is 75.0%.
- Aluminum: Window frames (7610.10.00.10) are 50.0%, while other architectural/ornamental aluminum lattice work (7610.90.00.40) is 80.7%.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current trade policy applies (See details below)
🎯 1. Plastic Variants (3925.20.00.91 & 3925.90.00.00)
A. 3925.20.00.91 – Plastic Door/Window Frames & Borders
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Additional Tariff | 7.5% |
| Total Tax Rate | 12.8% |
| Tax Calculation | CIF Value × 12.8% |
| Policy Note | Lower risk. No mention of specific steel/aluminum surtaxes applying to plastics here. |
B. 3925.90.00.00 – Other Plastic Builders' Ware
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% |
| Policy Note | Optimal Strategy: If your lattice frame is not specifically a "door/window frame," classify here to pay 0% duty. |
🎯 2. Steel Variants (7308.20.00.90 & 7308.90.95.60)
A. 7308.20.00.90 – Steel Lattice Masts & Towers
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 25.0% (Section 301 Steel/Al/Cu Surcharge) |
| Specific Surcharge | 50% (Steel/Al/Cu Products Surcharge) |
| Total Tax Rate | 75.0% |
| Tax Calculation | CIF Value × 75.0% |
| Legal Basis | Base 0% + 25% (Section 301) + 50% (Specific Steel/Al/Cu Surcharge) |
B. 7308.90.95.60 – Steel Architectural & Ornamental Work
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 25.0% (Section 301 Steel/Al/Cu Surcharge) |
| Specific Surcharge | 50% (Steel/Al/Cu Products Surcharge) |
| Total Tax Rate | 75.0% |
| Tax Calculation | CIF Value × 75.0% |
| Legal Basis | Base 0% + 25% (Section 301) + 50% (Specific Steel/Al/Cu Surcharge) |
📌 Explanation:
- 50% Surcharge: Applies specifically to "Steel, Aluminum, and Copper Products" imported from China under current emergency powers.
- 25% Surcharge: Standard Section 301 tariffs on many steel structures.
- Total 75%: This is a very high barrier. Ensure the product is correctly described to avoid misclassification penalties.
🎯 3. Aluminum Variants (7610.10.00.10 & 7610.90.00.40)
A. 7610.10.00.10 – Aluminum Windows & Frames (Lattice Style)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% (Specific sub-category exempt from some surcharges?) |
| Specific Surcharge | 50% (Steel/Al/Cu Products Surcharge) |
| Total Tax Rate | 50.0% |
| Tax Calculation | CIF Value × 50.0% |
| Legal Basis | 0% Base + 0% Add. + 50% Specific Al/Cu Surcharge |
B. 7610.90.00.40 – Aluminum Architectural & Ornamental Work
| Item | Content |
|---|---|
| Base Tariff | 5.7% |
| Additional Tariff | 25.0% (Section 301 Steel/Al/Cu Surcharge) |
| Specific Surcharge | 50% (Steel/Al/Cu Products Surcharge) |
| Total Tax Rate | 80.7% |
| Tax Calculation | CIF Value × 80.7% |
| Legal Basis | 5.7% Base + 25% Add. + 50% Specific Al/Cu Surcharge |
📌 Explanation:
- Window Frames (7610.10.00.10): At 50%, they are cheaper than general ornamental aluminum (80.7%).
- General Ornamental (7610.90.00.40): Suffers from Base (5.7%) + Add (25%) + Specific (50%) = 80.7%.
- Strategy: If your "Lattice Border" can be argued as part of a "Window Frame" assembly, it saves 30.7% in taxes compared to general ornamental classification.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Documentation Checklist (No Exceptions)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must detail material (Steel/Alu/Plastic), dimensions, and finish. |
| ✅ Technical Drawing | ✔️ | Shows if it's a "Window Frame" or "General Ornament." Critical for Ch 73/76 classification. |
| ✅ Product Photos | ✔️ | Clear shots of the lattice structure, joints, and any door/window integration. |
| ✅ Commercial Invoice | ✔️ | Must accurately describe the product. Avoid vague terms like "Metal Parts." Use "Aluminum Lattice Window Frame." |
| ✅ Bill of Lading | ✔️ | Ensure weight and volume match the invoice. |
✅ 2. Classification Strategy (Key Mnemonics)
🔥 "Plastic Zero or Twelve, Steel Seventy-Five, Aluminum Fifty or Eighty!"
| Scenario | Correct HS Code | Total Tax | Why? |
|---|---|---|---|
| Plastic Lattice Panel (No Door/Window) | 3925.90.00.00 |
0.0% | Fits "Other" builders' ware. |
| Plastic Window Frame (Lattice Design) | 3925.20.00.91 |
12.8% | Specific "Door/Window Frame" category. |
| Steel Lattice Mast/Structural | 7308.20.00.90 |
75.0% | Specific "Towers/Lattice Masts." |
| Steel Decorative Lattice Fence | 7308.90.95.60 |
75.0% | "Architectural/Ornamental" Steel. |
| Aluminum Window with Lattice | 7610.10.00.10 |
50.0% | Specific "Windows and Frames." |
| Aluminum Decorative Lattice Wall | 7610.90.00.40 |
80.7% | "Other Architectural/Ornamental" Aluminum. |
✅ 3. Special Case Handling
| Situation | Recommendation |
|---|---|
| "Is it a Window or a Fence?" | If the lattice is part of a window assembly, declare as Window Frame (7610.10.00.10). If it's a standalone garden fence, declare as Ornamental Work (7610.90.00.40). The tax difference is 30.7%! |
| Mixed Material Parts | If a plastic lattice is attached to a steel frame, the essential character determines classification. Usually, the structural metal frame dominates. |
| Prefabricated Buildings? | If the lattice frame is part of a "Prefabricated Building" (Heading 9406), it might be excluded from these structure headings. Ensure it’s not a complete building kit. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | See Section II | 0% - 80.7% | FCC/UL (if electrical), No specific for lattice | High Tariff Risk on Steel/Alu. |
| 🇨🇳 China | See Section II | 0% - 12.8% | CCC (if electrical) | No US-style Section 301/50% surcharges. |
| 🇪🇺 EU | Similar Codes | 0% - 12% | CE Mark (Construction Products Regulation) | No massive surtaxes like US. |
| 🇬🇧 UK | Similar Codes | 0% - 12% | UKCA Mark | Post-Brexit rules apply. |
📌 Conclusion:
- USA is the most expensive market for Steel and Aluminum lattice frames due to the 50% Specific Surcharge + 25% Section 301.
- Plastic options are tax-efficient (0-12.8%).
- Aluminum Window Frames are more tax-efficient than Aluminum Ornamental Work in the US.
📌 VI. Common Errors & Pitfalls (Blood & Tears Lessons)
❌ Mistake 1: Classifying an Aluminum Window Frame as "General Aluminum Structure."
👉 Consequence: Pay 80.7% instead of 50.0%. Loss of 30.7% profit margin.
❌ Mistake 2: Calling a Steel Lattice Mast "Architectural Work" without justification.
👉 Consequence: Still 75.0%, but risks audit if description is vague. Must clearly state "Lattice Mast" vs. "Decorative Fence."
❌ Mistake 3: Ignoring the "Plastic" option for decorative borders.
👉 Consequence: Importing plastic lattice as "General Goods" might hit 0%, but if it's a "Window Frame," it hits 12.8%. Misclassification leads to penalties.
✅ Correct Action:
“Aluminum Lattice Window Frame, 1.2m x 1.5m, Tempered Glass, Anodized Finish, Model LF-2026, Compliant with US Window Standards.”
🎯 VII. Conclusion: Precise Classification Saves Millions!
🎯 Remember the Golden Rules:
🔹 “Plastic Zero or Twelve, Steel Seventy-Five, Aluminum Fifty or Eighty!”
🔹 “Window Frames are Cheaper than Ornamental Work in Aluminum!”
🔹 “Steel Always Suffers 75% in the US – Plan Ahead!”
📌 Pro Tip:
If your product can be legally interpreted as a “Window Frame” (even with lattice design), always choose 7610.10.00.10 (50%) over 7610.90.00.40 (80.7%).
For Steel, there is no escape from the 75% rate, so focus on volume efficiency or duty drawback programs.
📣 Immediate Action:
📞 Consult a licensed customs broker.
📷 Submit product drawings for Advance Ruling if value is high.
🚀 Get it right, or pay the price!
✨ Professional clearance starts with accurate classification!
💼 Every percentage point counts!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。