Other Plastic Display Boards
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3920200055 | 39.2% | CN | US | 官方文档 |
| 3920995000 | 40.8% | CN | US | 官方文档 |
| 8708295160 | 0.0% | CN | US | 官方文档 |
| 8708998180 | 37.5% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
商品图片
AI分析
🖥️ Other Plastic Display Boards (Automotive/Industrial Exterior Trim)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
📌 Part 1: Product Definition & Classification: Do You Really Understand "Plastic Display Boards"?
Plastic Display Boards are primarily used as exterior trim pieces, decorative panels, or protective covers for vehicles, industrial equipment, or consumer electronics. In international trade, the classification depends heavily on: 1. Material Composition: Non-foamed, unreinforced plastics (e.g., PP, ABS, PC). 2. Form Factor: Plates, sheets, films, foils, or strips. 3. Specific Use: Whether it is classified as a general plastic product or a specific part of a machine/vehicle (e.g., auto parts).
⚠️ Key Distinction Point:
- If the product is a general plastic sheet/plate used for various purposes → Chapter 39
- If the product is specifically identified as an automotive exterior part (e.g., grille, fender flare, trim) → Chapter 87
- If the product is a general plastic article not specified elsewhere → Chapter 39/3926
📦 Part 2: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the four possible HS Codes for "Other Plastic Display Boards," along with their specific applications and tax implications.
| HS Code | Product Description | Application Scenario | Tax Rate (Total) |
|---|---|---|---|
3920.20.00.55 |
Other plates, sheets, film, foil and strip, of polymers of ethylene | General plastic exterior panels; matched material (plastic) and form (plate/sheet) | 39.2% |
3920.99.50.00 |
Other plates, sheets, film, foil and strip, of plastics; other | Non-foamed, unreinforced plastic plates/sheets; generic plastic display boards | 40.8% |
8708.29.51.60 |
Body parts and accessories thereof; other | Automotive-specific; matched plastic material and "body part/accessory" use; other parts and accessories | 87.5% (2.5% + 85.0%) |
8708.99.81.80 |
Parts and accessories for vehicles of heading 87.01 to 87.05; other | Automotive exterior trim; matched auto exterior use and plastic material; other parts and accessories | 37.5% |
3926.30.50.00 |
Other articles of plastics and articles of other materials of heading 39.01 to 39.14; other | Plastic car-use items/connection plate decorations; matched plastic material and body-use/connection plate purpose | 22.8% |
🔍 Key Reminder:
- General Plastic Sheets (3920.xx.xx.xx) are taxed based on material type. High tariffs apply due to USITC Section 301 tariffs.
- Auto Parts (8708.xx.xx.xx) are taxed based on function. Crucial Note: One auto part code (8708.29.51.60) has an exceptionally high effective rate (87.5%) due to additional steel/aluminum/copper-related surcharges mentioned in the data.
- General Plastic Articles (3926.30.50.00) may offer a lower rate if classified as general decorative items rather than specific structural plates.
💰 Part 3: 2026 Latest Tariff Rate Breakdown (Including Surcharges, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards (including subsequent imports)
🎯 1. 3920.20.00.55 – Plates/Sheets of Polymers of Ethylene
| Item | Content |
|---|---|
| Base Tariff | 4.2% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Rate | 39.2% |
| Tax Calculation | CIF Value × 39.2% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3920.20.00.55 → FOOTNOTE:301 |
📌 Explanation:
- The 25% USITC surcharge is applied under Section 301 of the Trade Act against Chinese goods.
- The 10% IEEPA surcharge is applied under the International Emergency Economic Powers Act against Chinese/ Hong Kong products.
- Total 39.2%: This is a high tariff rate, significantly increasing the cost of general plastic sheets.
🎯 2. 3920.99.50.00 – Other Plastic Plates/Sheets
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3920.99.50.00 → FOOTNOTE:301 |
📌 Note:
- Similar to the above, this code applies to non-foamed, unreinforced plastic plates.
- The base rate is slightly higher (5.8% vs 4.2%), resulting in a 40.8% total rate.
- Even for "exotic" plastics or custom sheets, if they fall under "other plastics," this high rate applies.
🎯 3. 8708.29.51.60 – Auto Body Parts & Accessories (Other)
| Item | Content |
|---|---|
| Base Tariff | 2.5% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Steel/Aluminum/Copper Surcharge | +50.0% |
| Total Rate | 87.5% (2.5% + 85.0%) |
| Tax Calculation | CIF Value × 87.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:8708.29.51.60 → FOOTNOTE:301 + Metal Surcharge |
📌 Warning:
- This code carries the highest risk. The data indicates a 50% additional surcharge for steel, aluminum, or copper products, or potentially a misclassification penalty if the product contains metallic components.
- If the plastic display board is considered an "auto body part," this 87.5% rate is devastating to profitability.
- Caution: Do not use this code unless the product is strictly defined as a structural auto body part and lacks metallic components that might trigger the 50% surcharge.
🎯 4. 8708.99.81.80 – Auto Parts & Accessories (Other)
| Item | Content |
|---|---|
| Base Tariff | 2.5% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:8708.99.81.80 → FOOTNOTE:301 |
📌 Note:
- This is a "catch-all" for auto parts not specifically listed elsewhere.
- If your plastic board is clearly an exterior trim piece (e.g., side skirt, wheel arch trim) and not a "body part" (which might trigger the higher surcharge), this code offers a lower rate (37.5%) compared to general plastic sheets.
- Strategic Advantage: For auto exterior trims, this may be preferable to3920.xxcodes if the product can be clearly defined as a vehicle part.
🎯 5. 3926.30.50.00 – Other Plastic Articles (Car Use/Connection Plates)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| USITC Surcharge (Section 301) | +7.5% (Note: Data shows 7.5% USITC here, different from 25% above) |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3926.30.50.00 → FOOTNOTE:301 |
📌 Important:
- This code has a lower USITC surcharge (7.5% vs 25%) according to the provided data.
- It applies to "plastic car-use items" or "connection plate decorations."
- If your "display board" can be classified as a decorative connection plate or general plastic article for cars (rather than a structural part), this offers the lowest total rate of 22.8%.
- Recommendation: This is the most cost-effective option if the product's function allows for this classification.
🛠️ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Preparation Checklist (Essential Documents)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Dimensions, material (e.g., ABS, PP), thickness, color |
| ✅ Product Photos (Clear) | ✔️ | Show the entire board, edges, mounting holes, and any logos |
| ✅ Declaration of Non-Metallic Content | ✔️ | Crucial for avoiding the 50% surcharge under 8708.29.51.60 |
| ✅ Commercial Invoice | ✔️ | Clearly state "Plastic Exterior Trim Panel" or "Plastic Display Board" |
| ✅ Packing List | ✔️ | Detail quantity, weight, and packaging type |
| ✅ Country of Origin Certificate | ✔️ | Required for China-origin goods to apply correct surcharges |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Function Defines Code, Material Determines Type, Declare Precisely, Save Taxes!”
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| General Plastic Sheet | 3920.20.00.55 or 3920.99.50.00 |
Misdeclare as "Auto Part" → Higher scrutiny |
| Auto Exterior Trim | 8708.99.81.80 |
Misdeclare as "General Plastic" → Miss out on specific part classification |
| Decorative Connection Plate | 3926.30.50.00 |
Misdeclare as "Structural Part" → Higher rate |
| Auto Body Part (with metal) | 8708.29.51.60 |
Ignore metallic content → Trigger 50% surcharge |
✅ 3. Special Cases Handling
| Case | Handling Advice |
|---|---|
| OEM Custom Plastic Boards | Provide customer design drawings to prove specific automotive use, favoring 8708 codes |
| Boards with Metal Inserts | Must declare accurately; expect high tariffs under 8708.29.51.60 (87.5%) |
| Boards for Non-Auto Use | Stick to 3920 or 3926 codes; do not force "Auto Part" classification |
| Multi-Material Boards | If plastic >50% by weight, classify under plastic chapters; declare components separately if needed |
🌍 Part 5: Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.30.50.00 |
22.8% | No specific | Lowest rate if classified as "other plastic article" |
| 🇺🇸 USA | 3920.20.00.55 |
39.2% | No specific | Higher rate for generic plastic sheets |
| 🇺🇸 USA | 8708.99.81.80 |
37.5% | No specific | Moderate rate for auto exterior trim |
| 🇺🇸 USA | 8708.29.51.60 |
87.5% | No specific | AVOID unless strictly structural auto body part |
| 🇨🇳 China | 3920.20.00.55 |
5% | CCC (if applicable) | Low import duty in China |
| 🇪🇺 EU | 3920.20.00.55 |
6.5% | CE + RoHS | Standard EU duty |
📌 Conclusion:
- USA is the most complex market due to Section 301 and IEEPA surcharges.
-3926.30.50.00(22.8%) is the most cost-effective if the product can be classified as a "general plastic article" or "connection plate."
-8708.29.51.60(87.5%) is extremely risky and should be avoided unless the product is a critical structural auto body part with no alternative classification.
📌 Part 6: Common Mistakes & Pitfall Avoidance (Blood & Tears Lessons)
❌ Mistake 1: Classifying a "plastic trim panel" as a "general plastic sheet" (3920) when it is clearly an auto part
👉 Consequence: Possible under-declaration risk if customs determines it's an auto part; but potentially higher tax if the auto part code has higher surcharges. However, 3926 offers the lowest rate, so 3920 is still worse than 3926 in this data set.
❌ Mistake 2: Using 8708.29.51.60 for a plastic board without disclosing metallic components
👉 Consequence: Trigger the 50% additional surcharge, leading to a total tax of 87.5%. This is a catastrophic cost increase.
❌ Mistake 3: Misdeclaring "Plastic Display Board" as "Computer Monitor" or "Electronics"
👉 Consequence: Misclassification leads to delays, penalties, and potential rejection of goods.
✅ Correct Action:
"Plastic Exterior Trim Panel, Model XYZ, Made of ABS, For Automotive Use, Non-Structural, No Metallic Components"
🎯 Part 7: Conclusion: Professional Declaration, Save Time, Reduce Costs!
🎯 Key Takeaways:
🔹 "Function First, Material Second, Code Choice Saves Money!"
🔹 "3926 is the King of Low Tax (22.8%), 8708.29 is the King of High Tax (87.5%)."
🔹 "Declare Precisely, Avoid Surprises, Keep Your Profit Margin!"
📌 Pro Tip:
If your plastic display board is exported to the US, consider classifying under 3926.30.50.00 if legally justifiable, as it offers the lowest total tax rate of 22.8%.
If it is strictly an auto part, use 8708.99.81.80 (37.5%) but avoid 8708.29.51.60 unless absolutely necessary.
📣 Immediate Action:
📞 Consult with a professional customs broker + Provide product photos + Apply for Advance Ruling
🚀 Ensure your plastic display boards, clear customs smoothly, maximize profits!
✨ Professional clearance starts with accurate classification!
💼 Every cent of tax is worth calculating precisely!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。