Photography Clamp
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926905000 | 21.3% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 7326908630 | 87.9% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
商品图片
AI分析
📸 Photography Clamp & Mounting Accessories
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy
📌 I. Product Definition & Classification: What exactly is a "Photography Clamp"?
A "Photography Clamp" is a broad term in the hardware and photography industries. It typically refers to mounting hardware, support structures, or frames used to secure tubes, pipes, light stands, or backdrops. In international trade, the classification depends strictly on the material and the specific function (structural support vs. accessory frame).
The term can encompass two entirely different tariff categories: 1. Metal Supports (Steel/Iron): Heavy-duty clamps, C-clamps, or pipe hangers used in studio rigging, lighting stands, or backdrops. These are classified under Chapter 73. 2. Plastic Frames/Mounts: Lightweight holders, slide mounts, or decorative frames made of plastic. These are classified under Chapter 39.
⚠️ Critical Distinction Point:
- If the item is made of Iron or Steel and functions as a hanger, support, or clamp for tubes/pipes (e.g., lighting clamps, pipe hangers) → Go to 7326.90.86.30
- If the item is made of Plastic and functions as a frame or mount for photographic slides → Go to 3926.90.50.00
- If the item is made of Plastic but is a general-purpose clamp/hook not for slides → Go to 3926.90.99.89
📦 II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided data, here are the relevant HS Codes for items described as "Photography Clamps" or related supports:
| HS Code | Product Description | Applicable Scenario | Material | Function |
|--------|--------------------------|----------|----------|
| 7326.90.86.30 | Hangers and similar supports for tubes and pipes (Other articles of iron or steel) | Studio lighting clamps, C-clamps, pipe hangers, heavy-duty metal mounts for backdrop stands | Iron/Steel | Structural support for tubes/pipes |
| 7326.90.86.88 | Other articles of iron or steel (Other: Other) | General metal hardware, non-specific clamps not fitting the "tube support" definition | Iron/Steel | General hardware/miscellaneous |
| 3926.90.50.00 | Frames or mounts for photographic slides (Other articles of plastics) | Plastic slide mounts, light box frames, decorative plastic holders | Plastic | Mounts for slides |
| 3926.90.99.89 | Other articles of plastics (Other: Other) | General plastic clips, rubber-coated plastic clamps, non-specific plastic hardware | Plastic | General hardware/miscellaneous |
🔍 Key Reminder:
- Metal Clamps: Most professional photography "clamps" (like Godox, Profoto, or generic C-clamps) are made of steel. They usually fall under 7326.90.86.30 if they are explicitly for holding tubes/pipes (like lighting stands). If they are generic hooks or brackets, use 7326.90.86.88. - Plastic Clamps: Lightweight studio accessories often use plastic. If it’s a slide mount, use 3926.90.50.00. If it’s a general plastic clip, use 3926.90.99.89.
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current tariffs apply (2025-2026)
🎯 1. 7326.90.86.30 & 7326.90.86.88 —— Iron/Steel Clamps & Supports
These items are subject to significant additional tariffs due to their material classification (Steel/Aluminum/Copper products).
| Item | Content |
|---|---|
| Base Tariff | 2.9% (ad valorem) |
| Section 301 Additional Tariff | 25.0% (China-origin steel products) |
| Steel/Aluminum/Copper Additional Tariff | 50.0% (Specific additional levy on steel/aluminum/copper articles) |
| Total Effective Tax Rate | 77.9% |
| Tax Calculation | CIF Value × 77.9% |
| De Minimis Exemption Eligible? | ❌ No (High tariff items are generally excluded from de minimis benefits in many contexts, or the total tax burden is too high to ignore) |
| Legal Basis Path | Base Tariff 2.9% + Section 301: 25% + Special Steel/Al/Cu Levy: 50% |
📌 Explanation:
- The 2.9% is the standard Most Favored Nation (MFN) rate for "Other articles of iron or steel." - The 25.0% is the standard Section 301 tariff for Chinese goods in this category. - The 50.0% is a critical additional tariff specifically levied on steel, aluminum, and copper articles. Since photography clamps are typically steel, this 50% surcharge applies. - Total: 77.9%. This is an extremely high cost. Importers must calculate this into the landed cost immediately.
🎯 2. 3926.90.50.00 —— Plastic Frames/Mounts for Photographic Slides
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariffs | 0.0% |
| Total Effective Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Exemption Eligible? | ✅ Yes (If value is under $800) |
| Legal Basis Path | Base Tariff 0% + No Additional Levies |
📌 Note:
- Plastic frames for slides are exempt from additional tariffs. - This is a zero-tariff category, making it highly competitive for importers.
🎯 3. 3926.90.99.89 —— Other Plastic Articles (General Plastic Clamps)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Additional Tariffs | 7.5% (Section 301) |
| Total Effective Tax Rate | 12.8% |
| Tax Calculation | CIF Value × 12.8% |
| De Minimis Exemption Eligible? | ✅ Yes (If value is under $800) |
| Legal Basis Path | Base Tariff 5.3% + Section 301: 7.5% |
📌 Note:
- General plastic hardware (non-slide mounts) has a low additional tariff. - Total: 12.8%. This is a moderate cost, much lower than steel.
🛠️ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
✅ 1. Documentation Checklist (Required)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification | ✔️ | Material (Steel vs. Plastic), Dimensions, Load Capacity |
| ✅ Product Photos | ✔️ | Clear shots of the clamp, label, and usage (e.g., attached to a pipe) |
| ✅ Commercial Invoice | ✔️ | Must clearly state material: "Steel Lighting Clamp" or "Plastic Slide Mount" |
| ✅ Packing List | ✔️ | Weight and dimensions |
| ✅ Material Declaration | ✔️ | Explicitly state if it contains Iron/Steel (triggering 50% tax) |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 “Steel Clamps Pay 78%, Plastic Clamps Pay Little!”
| Scenario | Correct HS Code | Tax Rate | Error Consequence |
|---|---|---|---|
| Steel C-Clamp/Lighting Clamp | 7326.90.86.30 |
77.9% | Misdeclaring as plastic → Severe Penalty/Seizure |
| Steel Bracket/Hook (Generic) | 7326.90.86.88 |
77.9% | Same as above |
| Plastic Slide Mount | 3926.90.50.00 |
0.0% | Misdeclaring as steel → Overpaying tax |
| Plastic Clip (General) | 3926.90.99.89 |
12.8% | Misdeclaring as slide mount → Possible audit if description mismatch |
✅ 3. Special Cases
| Scenario | Handling Advice |
|---|---|
| Hybrid Clamp (Steel Body + Plastic Coating) | Classified as Steel (7326). The plastic is incidental. Tax: 77.9%. |
| Aluminum Clamps | Classified as Steel/Aluminum/Copper. Tax: 77.9% (50% additional applies). |
| Wooden Clamps | Not covered in this data. Check Chapter 44. Likely lower tax. |
| Rubber-Plastic Clamps | If >50% plastic, likely 3926.90.99.89. Tax: 12.8%. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code (Steel Clamp) | Tariff | Notes |
|---|---|---|---|
| 🇺🇸 USA | 7326.90.86.30 |
77.9% | High tariffs on steel! |
| 🇨🇳 China | 7326.90.86.30 |
~6-10% | No US-style additional tariffs. |
| 🇪🇺 EU | 7326.90.89 |
~6-8% | No Section 301. |
| 🇬🇧 UK | 7326.90.89 |
~6-8% | Post-Brexit tariffs apply. |
📌 Conclusion:
- USA is the highest-cost market for steel photography clamps due to the 50% additional steel tariff. - Plastic accessories face minimal tariffs globally, making them attractive for import.
📌 VI. Common Mistakes & Pitfall Guide (Blood Lessons)
❌ Mistake 1: Declaring a Steel Lighting Clamp as a "Plastic Clip"
👉 Consequence: Customs inspection reveals steel → 77.9% tax + penalties + potential seizure.
❌ Mistake 2: Using "Clamp" as a generic term without specifying material
👉 Consequence: Customs may default to the highest tax rate or hold goods for further classification.
❌ Mistake 3: Ignoring the 50% Steel/Aluminum Surcharge
👉 Consequence: Profit margins are wiped out. 77.9% is not a typo!
❌ Mistake 4: Misclassifying Plastic Slide Mounts as "Other Plastic Articles"
👉 Consequence: Paying 12.8% instead of 0.0%. Unnecessary cost.
✅ Correct Approach:
"Steel Photography Lighting Clamp, 4-inch Jaw, Used for Supporting Tubes/Pipes, Model XYZ"
OR
"Plastic Photographic Slide Frame, 35mm, Transparent, for Light Box Use"
🎯 VII. Conclusion: Professional Declaration, Cost Optimization!
🎯 Remember the Mantra:
🔹 “Steel Clamps = 77.9% Tax (Base 2.9 + Sec301 25 + Steel Levy 50)”
🔹 “Plastic Slide Mounts = 0% Tax”
🔹 “Other Plastic Clamps = 12.8% Tax”
📌 Pro Tip:
- For Steel Clamps, consider sourcing from countries not subject to Section 301 (e.g., Vietnam, Thailand) to avoid the 25% + 50% tariffs, if possible.
- For Plastic Accessories, the low tariff makes them ideal for high-volume imports.
📣 Immediate Action:
📞 Contact a professional customs broker to verify the material composition of your clamps.
🚀 Accurate classification saves you up to 77.9% in tariffs for steel items!
✨ Professional Clearance Starts with Precise Classification!
💼 Every dollar of tax saved is pure profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。