Plastic Low Pressure Hose
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3917390050 | 38.1% | CN | US | 官方文档 |
| 3917310000 | 38.1% | CN | US | 官方文档 |
| 3917320010 | 38.1% | CN | US | 官方文档 |
| 3917390010 | 38.1% | CN | US | 官方文档 |
| 8481905000 | 20.5% | CN | US | 官方文档 |
商品图片
AI分析
🚰 Plastic Low Pressure Hoses: HS Code Classification & Customs Clearance Guide
🌐 HS Code Reference & Customs Strategy | 2026 Latest Tariff Analysis | Professional Clearance Tactics
📌 I. Product Definition & Classification: What is a "Plastic Low Pressure Hose"?
A Plastic Low Pressure Hose is a flexible tubular product made primarily of plastic materials (such as PVC, PE, PP, or ABS), designed to transport liquids or gases under low pressure conditions. Unlike high-pressure hydraulic hoses reinforced with metal braiding, these are typically used in: - Domestic plumbing (water supply, drainage) - Irrigation systems - Chemical transfer (non-corrosive media) - Industrial fluid handling (low-pressure applications)
⚠️ Key Distinction:
- If the hose is designed for high pressure or contains metal reinforcement, it may fall under different subheadings (e.g., 3917.31 or 3917.32).
- If it is a finished assembly with fittings, it may be classified as a pipe fitting (8481.90) or hose assembly (3917.39.00.10).
- This guide focuses on "Plastic Low Pressure Hoses" based on the provided<DATA>context, which primarily lists high-pressure or chemical media hoses. Note: Since "Low Pressure" is not explicitly listed in<DATA>, we must infer the closest applicable codes from the provided high-pressure/chemical hose data, as plastic hoses are generally grouped under 3917 unless specified otherwise.
📦 II. HS Code Classification Details (Based on Provided <DATA> Context)
Since <DATA> only lists High-Pressure and Chemical Media hoses, we must map "Plastic Low Pressure Hoses" to the most appropriate existing codes in <DATA>, assuming the material is plastic and the form is hose. The most relevant codes from <DATA> are:
| HS Code | Product Description (from <DATA>) | Applicable Scenario | Pressure/Media Type |
|--------|----------|--------------------------|
| 3917.39.00.50 | Plastic high-pressure hose, material: plastic, form: hose, meets classification requirements. | General plastic hoses (not specifically high-pressure or chemical) | Low/Medium Pressure (General Use) |
| 3917.31.00.00 | Plastic high-pressure hose or chemical medium hose, material: plastic, form: hose, consistent usage. | Hoses for chemical media or high pressure | Chemical/High Pressure |
| 3917.32.00.10 | Plastic chemical medium hose, material: plastic, form: hose, usage: chemical media transmission. | Hoses for transporting chemicals | Chemical Media |
| 3917.39.00.10 | Plastic high-pressure hose assembly, material: plastic, form: hose, belongs to pipe accessories. | Finished hose assemblies with fittings | Assembly/Accessory |
| 8481.90.50.00 | Plastic high-pressure hose assembly, material: plastic, belongs to pipe component parts. | Parts/assemblies of pipes | Component/Part |
🔍 Critical Note:
- The<DATA>provided only contains high-pressure and chemical media hoses. There is no explicit "Low Pressure" code in<DATA>.
- In standard HS Nomenclature, Plastic Hoses generally fall under 3917.39 (Other tubes, pipes, and hoses, with stiffening rings or otherwise combined, of plastics) if not specified for high pressure or chemicals.
- For "Low Pressure" plastic hoses,3917.39.00.50is the most appropriate match from<DATA>as it is the general "plastic hose" category, whereas others specify "high-pressure" or "chemical media".
- If the low-pressure hose is for chemicals, use3917.32.00.10.
- If it is an assembly with fittings, consider3917.39.00.10or8481.90.50.00.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes)
✅ Applicable Country: USA (US)
✅ Country of Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards (including subsequent imports)
🎯 1. 3917.39.00.50 —— Plastic Hose (General/Low Pressure)
| Item | Content |
|---|---|
| Base Duty Rate | 3.1% (ad valorem) |
| Section 301 Additional Duty | +25% (from USITC Footnote 9903.88.01) |
| 122-Clause Duty | +10% (targeting Chinese products) |
| Total Duty Rate | 38.1% |
| Duty Calculation | CIF Value × 38.1% |
| De Minimis Eligibility | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | USITC:3917.39.00.50 → FOOTNOTE:9903.88.01 → Section 122: 10% |
📌 Explanation:
- Base 3.1%: Standard MFN rate for plastic hoses.
- 25% Section 301: Additional tariff on Chinese goods under Trade Act Section 301.
- 10% 122-Clause: Additional duty on Chinese imports.
- Total 38.1%: This is a high duty rate. Proper classification is critical to avoid misclassification penalties.
🎯 2. 3917.31.00.00 —— Plastic High-Pressure/Chemical Hose
| Item | Content |
|---|---|
| Base Duty Rate | 3.1% |
| Section 301 Additional Duty | +25% |
| 122-Clause Duty | +10% |
| Total Duty Rate | 38.1% |
| Duty Calculation | CIF Value × 38.1% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | USITC:3917.31.00.00 → FOOTNOTE:9903.88.01 → Section 122: 10% |
📌 Note: Same rate as general plastic hoses. Applies if the hose is for high pressure or chemicals.
🎯 3. 3917.32.00.10 —— Plastic Chemical Media Hose
| Item | Content |
|---|---|
| Base Duty Rate | 3.1% |
| Section 301 Additional Duty | +25% |
| 122-Clause Duty | +10% |
| Total Duty Rate | 38.1% |
| Duty Calculation | CIF Value × 38.1% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | USITC:3917.32.00.10 → FOOTNOTE:9903.88.01 → Section 122: 10% |
📌 Note: Same rate. Applies specifically to chemical media transmission.
🎯 4. 3917.39.00.10 —— Plastic High-Pressure Hose Assembly
| Item | Content |
|---|---|
| Base Duty Rate | 3.1% |
| Section 301 Additional Duty | +25% |
| 122-Clause Duty | +10% |
| Total Duty Rate | 38.1% |
| Duty Calculation | CIF Value × 38.1% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | USITC:3917.39.00.10 → FOOTNOTE:9903.88.01 → Section 122: 10% |
📌 Note: Same rate. Applies to hose assemblies (with fittings).
🎯 5. 8481.90.50.00 —— Plastic High-Pressure Hose Assembly (Pipe Component)
| Item | Content |
|---|---|
| Base Duty Rate | 3.0% |
| Section 301 Additional Duty | +7.5% |
| 122-Clause Duty | +10% |
| Total Duty Rate | 20.5% |
| Duty Calculation | CIF Value × 20.5% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | USITC:8481.90.50.00 → FOOTNOTE:9903.88.01 (if applicable) → Section 122: 10% |
📌 Note: Lower total rate (20.5%) if classified as a pipe component/assembly under 8481. This requires proving it is a part of a pipe system rather than a standalone hose.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
✅ 1. Required Documentation (None of these can be omitted)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Material type (PVC, PE, etc.), inner/outer diameter, pressure rating, length |
| ✅ Material Certificate | ✔️ | Proof of plastic composition, chemical resistance (if for chemicals) |
| ✅ Product Photos | ✔️ | Clear images of hose, fittings, labels, and packaging |
| ✅ Commercial Invoice | ✔️ | Accurate description: "Plastic Hose, Low Pressure, PVC, 1/2 inch, 50ft" |
| ✅ Packing List | ✔️ | Details of quantity, weight, dimensions, and assembly status |
| ✅ Declaration of Non-Use in High-Pressure Applications | ✔️ | If claiming 3917.39.00.50, prove it is NOT for high pressure |
| ✅ Certification (if applicable) | ✔️ | NSF/ANSI 61 (for potable water), FDA (for food-grade), UL |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 "Clear Pressure, Clear Material, Clear Use!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Low-Pressure Plastic Hose | 3917.39.00.50 – "Plastic Hose, Low Pressure, PVC" |
Misdeclare as "High-Pressure" → No change in rate, but risks audit |
| Chemical-Resistant Low-Pressure Hose | 3917.32.00.10 – "Plastic Chemical Hose" |
Misdeclare as general hose → Same rate, but incorrect compliance |
| Hose with Fittings (Assembly) | 3917.39.00.10 or 8481.90.50.00 |
Declare as loose hose → May lead to reclassification |
| Loose Hose (No Fittings) | 3917.39.00.50 |
Declare as assembly → Higher scrutiny |
✅ 3. Special Cases Handling
| Scenario | Recommendation |
|---|---|
| OEM Custom Hose | Provide design specs + customer order to prove specific use |
| Food-Grade Water Hose | Provide NSF/ANSI 61 certification; may still be 3917.39.00.50 |
| Industrial Chemical Hose | Must declare chemical compatibility; use 3917.32.00.10 |
| Hose Assembly (with Connectors) | Evaluate if 8481.90.50.00 (20.5%) is applicable; provides duty savings |
🌍 V. Global Customs Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3917.39.00.50 |
38.1% (China) | NSF, UL, FDA (if applicable) | High duty due to 301 + 122 |
| 🇨🇳 China | 3917.39.00.50 |
~5-10% | CCC (if applicable) | Lower duty, no additional taxes |
| 🇪🇺 EU | 3917.39.00 |
4-6.5% | CE, REACH | No additional tariffs |
| 🇯🇵 Japan | 3917.39.00 |
3-8% | JIS, PSE | Moderate duty |
| 🇦🇺 Australia | 3917.39.00 |
5% | RCM | Moderate duty |
📌 Conclusion:
- USA imposes the highest total duty (38.1%) due to Section 301 and 122-Clause tariffs.
- China produces most plastic hoses, so origin declaration must be accurate.
- Consider supply chain diversification to Vietnam/Mexico if possible for duty avoidance.
📌 VI. Common Mistakes & Pitfall Avoidance (Lessons Learned)
❌ Mistake 1: Declaring a hose assembly (with fittings) as a loose hose
👉 Consequence: May be reclassified to 3917.39.00.10 or 8481.90.50.00, leading to duty disputes or penalties.
❌ Mistake 2: Not specifying pressure rating in declaration
👉 Consequence: Customs may assume high-pressure and apply stricter scrutiny, delaying clearance.
❌ Mistake 3: Omitting material composition
👉 Consequence: HS Code 3917 requires plastic type; incorrect material can lead to wrong classification.
❌ Mistake 4: Assuming de minimis applies
👉 Consequence: 38.1% duty is non-exempt; shipments under $800 will still be subject to duty.
✅ Correct Approach:
"Plastic Hose, PVC, Low Pressure, 1/2 inch ID, 100 psi max, 50ft, NSF/ANSI 61 Certified, Model XYZ"
🎯 VII. Conclusion: Precision in Classification Saves Money!
🎯 Remember the Mnemonic:
🔹 "Low Pressure = 3917.39.00.50 (38.1%)
🔹 "Chemical = 3917.32.00.10 (38.1%)
🔹 "Assembly with Fittings = 8481.90.50.00 (20.5%) – SAVE MONEY!
🔹 "No De Minimis – Prepare for 38.1% Duty!**
📌 Pro Tip:
If your plastic hoses are shipped from Vietnam, Mexico, or Thailand, you may qualify for IEEPA exemptions or lower duties. Consider Advance Ruling to confirm classification.
📣 Immediate Action:
📞 Contact a licensed customs broker + Provide product specs + Request HS Code Advance Ruling
🚀 Ensure smooth customs clearance, reduce costs, and avoid delays!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every percentage point counts – don’t let duty rates eat your profits!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。