Rubber Impregnated Knitted Man Made Fiber Gloves
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4015195100 | 49.0% | CN | US | 官方文档 |
| 9018390020 | 10.0% | CN | US | 官方文档 |
| 9018390050 | 10.0% | CN | US | 官方文档 |
| 3926201050 | 10.0% | CN | US | 官方文档 |
| 4015191150 | 38.0% | CN | US | 官方文档 |
商品图片
AI分析
🧤 Rubber Impregnated Knitted Man Made Fiber Gloves (Gloves with Rubber Coating)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Truly Understand These Gloves?
Rubber Impregnated Knitted Man Made Fiber Gloves are protective gloves consisting of a knitted base made from synthetic fibers (such as nylon, polyester, or acrylic), which are then impregnated (coated, dipped, or laminated) with rubber or synthetic rubber compounds to provide water resistance, chemical resistance, and grip.
In international trade, these gloves are primarily classified under Chapter 40 (Rubber) or Chapter 39 (Plastics), depending on the dominance of the material and the specific function.
Key Distinction:
- If the Rubber provides the primary protective function (water/chemical proof) and forms the outer layer → Often Chapter 40.
- If the Plastic/Resin coating is dominant or if classified under "Plastic gloves" → Often Chapter 39.
- If the glove is strictly a Medical Device (sterile, for surgery) → Often Chapter 90.
⚠️ Critical Differentiator:
- Chapter 40 (e.g., 4015): Focuses on "Gloves, Mittens, and Gloves" made of vulcanized rubber or rubberized materials.
- Chapter 39 (e.g., 3926): Focuses on "Other articles of plastics" or gloves made of plastic/polymer materials.
- Chapter 90 (e.g., 9018): Focuses on Medical instruments (surgical gloves, catheters) if intended for medical use.
📦 II. Detailed HS Code Classification (2026 Latest Tariff Authority)
Based on the provided data, here are the four possible classifications for Rubber Impregnated Knitted Man Made Fiber Gloves:
| HS Code | Product Description | Scenario / Function | Primary Material Logic |
|---|---|---|---|
| 4015.19.51.00 | Rubber Impregnated Fingers / Gloves | General protective gloves, gloves for general industrial use | Vulcanized rubber dominates; classified under "Gloves, mittens, and gloves" (Other). |
| 9018.39.00.20 | Rubber Impregnated Fingers (导管/探条 extension) | Specialized medical/diagnostic tools, guiding/covering function | Function is "catheter/rod" extension (Medical Device Category). |
| 9018.39.00.50 | Medical Rubber Impregnated Fingers | Sterile surgical or diagnostic gloves, "Other" medical category | Explicitly defined as a Medical Instrument. |
| 3926.20.10.50 | Rubber Impregnated Fingers (Plastic/Polymer Composite) | Gloves treated as plastic/polymer composites for boxing or general protection | Treated as "Plastic/Gloves" due to material composition dominance. |
🔍 Focus Point:
- 4015.19.51.00 is the standard classification for industrial/work gloves with a rubber coating.
- 9018.39.00.20 and 9018.39.00.50 are for medical applications (catheters, probes, sterile fingers).
- 3926.20.10.50 is for gloves treated as plastic/polymer products, often for boxing or specific composite uses.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
✅ Applicable Country: China (Export to USA)
✅ Origin: China (CN)
✅ Effective Date: As per current US trade policies (Section 301 / 122 Clause).
🎯 1. 4015.19.51.00 — General Rubber Impregnated Gloves (Industrial)
| Item | Detail |
|---|---|
| Base Tariff | 14.0% (Basic Import Duty) |
| Section 301 (Add-on) | +25.0% (US Trade Remedies) |
| Section 122 Duty | +10.0% (New Section 122 Clause Tariff) |
| Total Tariff | 49.0% |
| Tax Calculation | CIF Value × 49% |
| De Minimis Exemption | ❌ No (High tariff rate, no small parcel exemption) |
| Legal Path | HTSUS:4015.19.51.00 → Section 301:14.0% → Section 301:25.0% → Section 122:10.0% |
📌 Interpretation:
- This is the highest tariff (49%) because it falls under standard rubber gloves with multiple layers of punitive tariffs.
- The 25% Section 301 duty is the main burden, plus the 10% Section 122 surcharge.
- Recommendation: This route is highly costly. Consider if the product can be classified differently.
🎯 2. 9018.39.00.20 — Medical/Device Extension (Guiding/Covering)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% (Duty-Free) |
| Section 301 (Add-on) | 0.0% |
| Section 122 Duty | +10.0% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value × 10% |
| De Minimis Exemption | ❌ No |
| Legal Path | HTSUS:9018.39.00.20 → Section 122:10.0% |
📌 Interpretation:
- This classification avoids the base duty and Section 301 surcharge.
- Only the 10% Section 122 applies.
- Crucial: The product must be clearly defined as a medical device extension (e.g., guiding tube, probe cover) to qualify.
🎯 3. 9018.39.00.50 — Medical Rubber Impregnated Fingers (Surgical/Medical)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 (Add-on) | 0.0% |
| Section 122 Duty | +10.0% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value × 10% |
| De Minimis Exemption | ❌ No |
| Legal Path | HTSUS:9018.39.00.50 → Section 122:10.0% |
📌 Interpretation:
- Identical tax treatment to9018.39.00.20.
- Must be marketed and documented as a Medical Instrument.
- Recommendation: If the product is used in healthcare, this is the most tax-efficient route.
🎯 4. 3926.20.10.50 — Plastic/Polymer Composite Gloves (e.g., Boxing)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 (Add-on) | 0.0% |
| Section 122 Duty | +10.0% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value × 10% |
| De Minimis Exemption | ❌ No |
| Legal Path | HTSUS:3926.20.10.50 → Section 122:10.0% |
📌 Interpretation:
- Classified under Plastics rather than Rubber, avoiding the higher Section 301 duties on rubber.
- Condition: The product must be presented as a plastic/polymer composite or used for boxing/specific industrial purposes where plastic is dominant.
🛠️ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Material & Function Documentation (Essential)
| Document | Must Provide | Why? |
|---|---|---|
| ✅ Material Composition Report | ✔️ | Prove if "Rubber" or "Plastic/Polymer" dominates the coating. |
| ✅ Intended Use Statement | ✔️ | Medical (for 9018) vs. Industrial (for 4015/3926). |
| ✅ Product Photos (Cross-section) | ✔️ | Show the knitted fiber core and the rubber/plastic coating thickness. |
| ✅ Medical Certification (if applicable) | ✔️ | FDA 510(k) or CE Mark if classifying under 9018. |
| ✅ Technical Data Sheet | ✔️ | Confirm "Impregnation" process vs. "Lamination". |
✅ 2. Declaration Strategy (Key Formulas)
🔥 "Classify by Function, Not Just Material!"
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| General Industrial Gloves | 4015.19.51.00 (Expect 49% tariff) |
Claiming "Medical" without proof → Seizure/Fine |
| Medical Surgical Gloves | 9018.39.00.50 (10% tariff) |
Declaring as "Industrial" → Overpayment (39% extra) |
| Specialized Device/Probe Cover | 9018.39.00.20 (10% tariff) |
Declaring as "Plastic" (3926) without function proof |
| Boxing/Protective Gear | 3926.20.10.50 (10% tariff) |
Declaring as "Rubber" (4015) → 49% tariff |
📌 Golden Rule:
- If you claim Chapter 90 (Medical), you MUST have medical certification.
- If you claim Chapter 39 (Plastic), you must prove the plastic content is dominant or the application is specific to plastic.
- Chapter 40 (Rubber) is the default for rubber-coated gloves but carries the highest tax burden (49%).
✅ 3. Special Situations Handling
| Situation | Suggested Action |
|---|---|
| OEM Custom Orders | Provide the client's spec sheet showing the intended use (Medical vs. Industrial). |
| Mixed Materials | If the knitted fiber is >50% and rubber is a coating, argue for 3926 (Plastic) if the rubber layer is thin. |
| Dual Use (Medical/Industrial) | Split Shipment: Declare medical items as 9018 (10%) and industrial items as 4015 (49%). |
| Small Orders (De Minimis) | Note: Currently, NO de minimis exemption applies for these items due to high tariffs. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 9018.39.00.50 (Medical) |
10% | FDA / CE | High tax on 4015 (49%) |
| 🇨🇳 China | 4015.19.51.00 |
5% | CCC | No Section 301/122 |
| 🇪🇺 EU | 4015.19.51.00 |
4% | CE / REACH | No Section 301 |
| 🇨🇦 Canada | 4015.19.51.00 |
7% | Health Canada | No Section 301 |
📌 Conclusion:
- USA is the only market with the Section 122 (10%) and Section 301 (25%) surcharges on standard rubber gloves (4015).
- Medical classification (9018) in the USA is the only way to reduce the tariff from 49% to 10%.
- Europe and Asia have much lower rates for standard rubber gloves.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring Medical Gloves as Industrial Gloves (4015).
👉 Result: Pay 49% tariff instead of 10%. Loss of 39% profit margin!
❌ Mistake 2: Declaring Industrial Gloves as Medical Devices (9018).
👉 Result: Customs Audit, Seizure, or Fine for false declaration. No medical cert = No 9018.
❌ Mistake 3: Ignoring Section 122 (10%) on 9018.
👉 Result: Underestimating the 10% "Add-on" tax. Total is not 0%, but 10%.
❌ Mistake 4: Failing to distinguish "Knitted Fiber + Rubber" vs. "Solid Rubber".
👉 Result: If the fiber is the core and rubber is a coating, 4015 applies, but if the coating is "Plastic", 3926 might apply.
✅ Correct Approach:
"Rubber Impregnated Knitted Fiber Gloves, Medical Use (Sterile), FDA 510(k) Approved, Model XYZ" →
9018.39.00.50(10% tariff).
🎯 VII. Conclusion: Professional Classification Saves Money!
🎯 Remember the Rule:
🔹 "Medical = 10% (if 9018)"
🔹 "Industrial Rubber = 49% (if 4015)"
🔹 "Plastic/Composite = 10% (if 3926)"
🔹 "Wrong Class = Overpay 39% or Get Seized!"
📌 Pro Tip:
- If your product can be certified as a Medical Device, always use the 9018 classification to save 39% in taxes.
- If it is Industrial, consider if you can re-engineer it as a Plastic/Polymer composite to use 3926 (10%) instead of 4015 (49%).
- Pre-Ruling: Apply for a Binding Tariff Information (BTI) or Customs Ruling from US CBP before shipping to avoid surprises.
📣 Take Action Now:
📞 Contact a Professional Customs Broker + Provide Product Specs + Apply for Classification Ruling
🚀 Clear Customs, Cut Costs, Maximize Profit!
✨ Professional Clearance Starts with Precise Classification!
💼 Every percent of tax saved is pure profit!
用户评价
关于 HS 编码归类
协调制度(HS)是由世界海关组织(WCO)制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构:
- 章(2 位)——商品大类(例如:第 84 章:机器和机械设备)
- 品目(4 位)——章内的更具体分类
- 子目(6 位)——国际通用细分,所有 WCO 成员国统一使用
- 本国细分(8-10 位)——各国自行扩展的细分编码,如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时,适用的关税税率可能包括:
- 最惠国(MFN)税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税,如 301 条款(反倾销)、232 条款(国家安全)或反补贴税
本页内容仅供参考。如需正式归类,请咨询当地海关或持牌报关代理。