Sauna Ice Bucket
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 6912004100 | 13.9% | CN | US | 官方文档 |
| 6912004810 | 19.8% | CN | US | 官方文档 |
| 6911108010 | 38.3% | CN | US | 官方文档 |
| 6911104100 | 16.3% | CN | US | 官方文档 |
商品图片
AI分析
🧊 Sauna Ice Bucket: The Paradox of Heat & Cold
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
📌 Part 1: Product Definition & Classification: What Exactly is a "Sauna Ice Bucket"?
In the context of international trade, a "Sauna Ice Bucket" is not a single, standardized commodity. It is generally categorized based on its material composition and primary function. The term usually refers to one of two distinct products:
- Thermal Containers for Ice/Sauna Use: Stainless steel or plastic buckets designed to hold ice for post-sauna cooling, or to store cold water. These are often made of vacuum-insulated steel (thermos-like) or simple plastic.
- Ice Buckets for Sauna Accessories: Sometimes, this term is confused with "sauna heaters" or "ice trays" for cooling the sauna room (ice plates), but strictly speaking, an "ice bucket" is a container.
⚠️ Critical Distinction Point:
- If the bucket is made of stainless steel (especially vacuum-insulated), it is likely classified under Chapter 73 (Articles of Iron or Steel) or Chapter 76 (Aluminum).
- If the bucket is made of plastic, it is classified under Chapter 39 (Plastics).
- If it is made of glass (rare for sauna use due to breakage risk, but possible for aesthetic luxury sets), it is Chapter 70.
- If it has an electric heating/cooling element integrated (active cooling), it becomes an electrical appliance under Chapter 85.
Assumption for this guide: The most common "Sauna Ice Bucket" is a stainless steel thermal container or a plastic storage bucket.
📦 Part 2: HS Code Classification Details (2026 Latest Tariff Authority)
Below are the most probable HS Codes for "Sauna Ice Buckets" based on material.
| HS Code | Product Description | Applicability | Material |
|---|---|---|---|
7323.93.00.00 |
Table, kitchen or other household articles and parts thereof, of stainless steel | Most Common: Stainless steel buckets, whether insulated or not, used for food/drink/ice | ✅ Stainless Steel |
7615.19.10.00 |
Other articles of aluminum household or toilet ware, not elsewhere specified or included | If made of aluminum (lightweight, common in premium sauna sets) | ✅ Aluminum |
3924.10.00.00 |
Tableware and kitchenware, of plastics | If made of plastic (common for disposable or low-cost sauna buckets) | ✅ Plastic |
3926.90.97.90 |
Other articles of plastics, not elsewhere specified or included | If the bucket is non-food contact grade (e.g., purely for holding ice logs, not for drinking) | ✅ Plastic |
8516.80.00.00 |
Electrothermic domestic appliances (e.g., electric ice makers or active cooling buckets) | If the bucket has built-in electric cooling/heating mechanisms | ✅ Electrical |
🔍 Key Reminder:
- 7323.93.00.00 is the most frequent classification for high-end stainless steel sauna buckets.
- 3924.10.00.00 is common for budget plastic buckets.
- Do not classify as "sauna accessories" under a vague heading; customs requires specific material-based classification.
💰 Part 3: 2026 Latest Tariff Rate Details (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: 2025-11-10 onwards (includes subsequent imports)
🎯 1. 7323.93.00.00 —— Stainless Steel Household Articles (Most Common)
| Item | Content |
|---|---|
| Basic Tariff | 0% (ad valorem) |
| USITC Additional Tax | +25% (from USITC Footnote 9903.88.01) |
| IEEPA Additional Tax | +10% (for China/HK products, from Nov 10, 2025) |
| Total Tariff Rate | 35% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (deny_de_minimis) |
| Legal Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:7323.93.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- The 25% USITC tariff is part of Section 301 measures against China.
- The 10% IEEPA tariff is an additional penalty on Chinese origin goods.
- Total 35% is significant. For a $10 stainless steel bucket, you pay $3.50 in tariffs alone.
🎯 2. 3924.10.00.00 —— Plastic Tableware/Kitchenware
| Item | Content |
|---|---|
| Basic Tariff | 0% |
| USITC Additional Tax | +25% |
| IEEPA Additional Tax | +10% |
| Total Tariff Rate | 35% |
| Tax Calculation | CIF × 35% |
| De Minimis Eligibility | ❌ No |
| Legal Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3924.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Note:
- Plastic household items from China also face the same 35% total tariff.
- If the plastic bucket is not for food contact (e.g., industrial use), it might fall under3926.90.97.90, which may have different tariff treatments, but still likely subject to Section 301 duties.
🎯 3. 8516.80.00.00 —— Electrical Appliances (Active Cooling)
| Item | Content |
|---|---|
| Basic Tariff | 0% |
| USITC Additional Tax | +25% |
| IEEPA Additional Tax | +10% |
| Total Tariff Rate | 35% |
| Tax Calculation | CIF × 35% |
| De Minimis Eligibility | ❌ No |
📌 Note:
- Even if it's an "electric ice bucket," it is still subject to the same high tariffs if made in China.
- Additionally, it requires FCC certification for electrical compliance in the US.
🛠️ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Required Documentation Checklist (Non-Negotiable)
| Document | Mandatory | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify material (e.g., "304 Stainless Steel"), volume, and intended use (household vs. industrial). |
| ✅ Product Photos | ✔️ | Clear images showing the bucket, any branding, and material type (e.g., brushed steel vs. plastic). |
| ✅ Material Declaration | ✔️ | Explicitly state "Stainless Steel" or "Plastic." Ambiguity leads to misclassification. |
| ✅ Commercial Invoice | ✔️ | Description: "Stainless Steel Ice Bucket for Sauna Use" or "Plastic Household Bucket." |
| ✅ FCC Certificate | ✔️ | Only if electrical (e.g., active cooling bucket). Not needed for passive stainless/plastic buckets. |
| ✅ FDA Compliance (if food-contact) | ✔️ | If used for holding drinking water/ice for consumption, FDA compliance may be required. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Material First, Use Second, No Hidden Electronics!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Stainless Steel Bucket | 7323.93.00.00 – "Stainless Steel Household Article" |
Misdeclare as "Sauna Accessory" → Risk of audit & penalty |
| Plastic Bucket | 3924.10.00.00 – "Plastic Tableware" |
Misdeclare as "Plastic Container" (generic) → May trigger additional scrutiny |
| Electric Cooling Bucket | 8516.80.00.00 – "Electrothermic Appliance" |
Fail to declare FCC compliance → Seizure at Customs |
| Ice Bucket + Lid Set | Declare as one unit | Split into "bucket" + "lid" → Incorrect valuation & classification |
✅ 3. Special Cases Handling
| Case | Handling Advice |
|---|---|
| OEM Custom Bucket | Provide OEM agreement + design files. Avoid generic "sauna bucket" descriptions. |
| Food-Contact vs. Non-Food-Contact | If for drinking ice, declare as "Tableware" (3924 or 7323). If for non-food use, declare as "Other Plastic Article" (3926). This affects FDA requirements. |
| Bundled with Sauna Heaters | Declare separately if possible. If bundled, the entire set may be classified under the principal function (heater), which has different tariffs. |
| Luxury Crystal/Glass Bucket | Classify under 7013 (Glass tableware). Note: Glass items may have higher risk of breakage during shipping, increasing insurance costs. |
🌍 Part 5: Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7323.93.00.00 / 3924.10.00.00 |
35% (China Origin) | FCC (if electric), FDA (if food-contact) | High tariffs due to Section 301 & IEEPA |
| 🇨🇳 China | 7323.93.00.00 |
0% (Imported from US/EU) | CCC (if electric) | No additional penalties for non-electric items |
| 🇪🇺 EU | 7323.93.00.00 |
0% – 6.5% | CE (if electric), LFGB (Food Safety) | No Section 301 equivalent, but anti-dumping checks possible |
| 🇯🇵 Japan | 7323.93.00.00 |
0% – 3.5% | PSE (if electric), Food Sanitation Law | Strict food safety standards for stainless steel |
| 🇬🇧 UK | 7323.93.00.00 |
0% – 6% | UKCA (if electric) | Post-Brexit rules apply |
📌 Conclusion:
- USA is the most expensive market for Chinese-made sauna ice buckets due to 35% combined tariffs.
- EU and Japan are more favorable for non-electric items, with low or zero tariffs.
- Electrical compliance (FCC/CE/PSE) is critical for active cooling buckets.
📌 Part 6: Common Mistakes & Pitfall Guide (Lessons from Tears)
❌ Mistake 1: Declaring as "Sauna Accessory" without specifying material.
👉 Consequence: Customs cannot classify → Hold for examination, delay in release, potential re-classification and penalty.
❌ Mistake 2: Ignoring FDA requirements for stainless steel buckets used for drinking ice.
👉 Consequence: Product deemed "adulterated" → Refusal of entry unless reformulated or re-labeled.
❌ Mistake 3: Failing to disclose FCC compliance for electric cooling buckets.
👉 Consequence: Seizure and destruction by CBP. No exceptions.
❌ Mistake 4: Combining a stainless steel bucket with a plastic lid in separate HS codes.
👉 Consequence: Incorrect valuation → Underpayment of duties → Back taxes + penalties.
✅ Correct Approach:
"Stainless Steel Vacuum-Insulated Ice Bucket, 2L, For Household Use, Model XYZ, FDA Compliant, Made in China"
🎯 Part 7: Conclusion: Precision Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Material Determines Code, Use Determines Compliance."
🔹 "Stainless Steel = 7323, Plastic = 3924, Electric = 8516."
🔹 "35% Tariff is the Rule, Not the Exception, for China Origin in USA."
📌 Pro Tip:
If your bucket is made in Vietnam, Thailand, or Malaysia, you may avoid the 25% USITC tariff and 10% IEEPA tariff, reducing the total to 0%–6% (basic duty only).
Consider supply chain diversification to mitigate tariff risks for the US market.
📣 Immediate Action:
📞 Contact your freight forwarder with material specs + apply for Advance Ruling if shipping large volumes.
🚀 Clear customs smoothly, reduce costs, and boost profits!
✨ Professional clearance starts with precise classification!
💼 Every percentage point saved is pure profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。